In existing ceramic mold manufacturing processes, inorganic binder systems (Si-Na, two-component system) are applied to ensure the effective firing strength of the ceramic mold and core. These inorganic binder systems makes it possible to manufacture a ceramic mold and core with high dimensional stability and effective strength. However, as in general sand casting processes, when molten metal is injected at room temperature, there is a limit to the production of thin or complex castings due to reduced fluidity caused by the rapid cooling of the molten metal. In addition, because sodium silicate generated through the vitrification reaction of the inorganic binder is converted into a liquid phase at a temperature of 1,000 ℃. or higher, it is somewhat difficult to manufacture parts through high-temperature casting. Therefore, in this study, a high-strength ceramic mold and core test piece with effective strength at high temperature was produced by applying a Si-Na-Ti three-component inorganic binder. The starting particles were coated with binary and ternary inorganic binders and mixed with an organic binder to prepare a molded body, and then heat-treated at 1,000/1,350/1,500 ℃ to prepare a fired body. In the sample where the two-component inorganic binder was applied, the glass was liquefied at a temperature of 1,000 ℃ or higher, and the strength decreased. However, the firing strength of the ceramic mold sample containing the three-component inorganic binder was improved, and it was confirmed that it was possible to manufacture a ceramic mold and core via high temperature casting.
Mold grows more easily when humidity is higher in indoor spaces, and as such is found more often on wetted areas in housing such as walls, toilets, kitchens, and poorly managed spaces. However, there have been few studies that have specifically assessed the level of mold in the indoor spaces of water-damaged housing in the Republic of Korea. We investigated the levels of airborne mold according to the characteristics of water damage types and explored the correlation between the distribution of mold genera and the characteristics of households. Samplings were performed from January 2016 to June 2018 in 97 housing units with water leakage or condensation, or a history of flooding, and in 61 general housing units in the metropolitan and Busan area, respectively. Airborne mold was collected on MEA (Malt extract agar) at flow rate of 100 L/min for 1 min. After collection, the samples were incubated at $25^{\circ}C$ for 120 hours. The cultured samples were counted and corrected using a positive hole conversion table. The samples were then analyzed by single colony culture, DNA extraction, gene amplification, and sequencing. By type of housing, concentrations of airborne mold were highest in flooded housing, followed by water-leaked or highly condensed housings, and then general housing. In more than 50% of water-damaged housing, the level of airborne mold exceeded the guideline of Korea's Ministry of Environment ($500CFU/m^3$). Of particular concern was the fact that the I/O ratio of water-damaged housing was greater than 1, which could indicate that mold damage may occur indoors. The distribution patterns of the fungal species were as follows: Penicillium spp., Cladosporium spp. (14%), Aspergillus spp. (13%) and Alternaria spp. (3%), but significant differences of their levels in indoor spaces were not found. Our findings indicate that high levels of mold damage were found in housing with water damage, and Aspergillus flavus and Penicillium brevicompactum were more dominant in housing with high water activity. Comprehensive management of flooded or water-damaged housing is necessary to reduce fungal exposure.
Three major hospitals with over 500 beds located in and near Seoul were surveyed for airbone microorganisms from February 1, 1998 to February 18, 1998. The purpose of the study was to identify and quantify microbiological organisms circulating in the air of three different areas in the hospitals. For the study, a RCS air sampler was utilized equipped with two different collection media, the agar strip GK-A for bacteria and the agar strip HS for fungi. The areas investigated were the intensive care unit (ICU) in the Department of internal medicine, the Newborns room in the Department of Obstetrics, and the microbiology laboratory. The results were as follows; 1. The average numbers of general microbiological particles collected on the agar strip GK-A media were $205CFU/m^3$, $232CFU/m^3$, and $128CFU/m^3$ in each hospitals. The highest concentration of $387CFU/m^3$ was found in the ICU of A hospital at 15:00 during the day. Further analysis of the collected bioaerosols by gram staining, revealed that there were gram positive cocci (89.5%), gram positive bacilli (7.2%), gram negative bacilli (2.8%), and fungi (0.5%), in descending order of frequency. 2. Ten different genes were identified from the agar strip GK-A. The most frequently identified organisms were: the Coagulase negative staphylococcus (55.0%), Micrococcus (21.4%), Enterococcus species(10.4%), and Bacillus species (7.2%). A series of antibiotics susceptibility test were conducted against the aforementioned four(4) organisms. Ninety percent of coagulase negative stapylococcus were sensitive to Penicillins. Pathogenic microbes isolated include: Staphylococcus aureus, Acinetobacter species, Klebsiella pneumonia, Klebsiella oxytoca, and Pseudomonas aeroginosa. 3 Although 56.8% of the microorganisms grown on the strip HS media for fungi could not be identified, some of them were successfully identified. The most frequently found fungi were Aspergillus (35.3%), Yeast or Molds (6.2%), and Penicillium (0.7%). Based on the results obtained from the study, it was concluded that some areas in the hospitals had abnormally high bioaerosol concentrations which could be attributed to human activity. Therefore, it is recommended that periodic assessments of indoor bioaerosols aiming to identify the possible sources should be conducted in order to maintain clean indoor environment in the hospitals.
품종별 무청의 표면 미생물 분포와 중심합성계획과 반응 표면분석법을 이용하여 물세척, 마이크로웨이브처리 및 스팀처리를 독립변수로 두고, 이들 전처리 조건에 따른 표면미생물의 변화를 조사하였다. 그 결과 무청 품종에 관계없이 병원성 미생물인 Salmomella spp., Camphylobacter spp., Vibrio spp., Shigella spp., Staphylococcus spp., Enterococcus spp. 및 Pediococcus spp.는 전혀 검출되지 않았다. 그러나 총균수의 경우는 품종에 따라 약간의 차이는 있었는데, $3.90{\times}10^5{\sim}1.20{\times}10^7CFU/g$의 범위를 보였고, 대장균군은 $1.10{\times}10^2{\sim}2.00{\times}10^5CFU/g$, 효모/곰팡이는 $2.40{\times}10^3{\sim}3.55{\times}10^6CFU/g$을 보인 반면 젖산균은 검출되지 않은 시료도 있었다. 또 전처리 방법에 따른 무청의 잔존 미생물의 감균 효과가 가장 좋은 전처리 방법은 스팀처리 방법이었다. 원료 무청의 각각의 전처리 방법을 독립변수(independent variables)로 하고, 총균수, 젖산균수 및 효모/곰팡이균수를 종속변수(dependent variables)로 하여 회귀 분석한 결과 상관관계를 나타내는 $R^2$값이 각각 0.89, 0.87, 0.85로 상관성이 높았으며, 물세척 횟수에 의한 감균 효과는 제한적이므고 마이크로웨이브처리나 스팀처리를 병행하여야 효과적이었다.
This study was investigated the changes of quality stability and physicochemical characteristics of the Korean red ginsengs stored for a long times over 20 years. The Korean red ginsengs were stored for 4 to 22 years in canned packaging with polypropylene film and wooden box at room temperatures. The unusal phenomena such as discoloration and pin hole in packaging were not observed. General bacteria showed the vlaues of below 100 CFU/g, coliform groups and molds were not found in any samples stored for 22 year. Any samples also were not detected in mycotoxins. The contents of moisture, ash and crude saponin were the levels of 10.6~11.1%, 3.8~4.2% and 4.1~4.7% during the whole storage periods, respectively. The contents of maltol, which has been known as characteristic flavour and antioxidant of Korean red ginseng, showed remarkably increasing tendency from 0.10 mg/g for 4 years to 2.53 mg/g for 22 years during the storage. The contents of AFG (arginyl-fructosyl-glucose), arginine and free sugar were slightly decreased. Acidic polysaccharide and ginsenoside were not changed significantly during the storage periods. The contents of acidic polysaccharide and total ginsenosides were the 75.1~76.3 mg/g and 15.1~16.6 mg/g, respectively. The sums of ginsenoside-Rg1,-Rb1 and -Rg3s were the ranges of 9.3~9.9 mg/g and PD (ginsenoside-Rb1, -Rb2,-Rc,-Rd,-Rg3s,-Rg3r)/PT (ginsenoside-Rg1,-Rg2,-Re,-Rf,-Rh1) saponin ratios were the levels of 1.4~1.5. These results suggest that Korean red ginsengs stored for long periods show relatively stable quaility stabilities and not significantly changed the contents of ginsenoside and polysaccharide during the storage up to 22 years.
과열증기 건조처리 후 열풍 건조한 인삼의 건조율이 열풍 건조만으로 건조한 인삼에 비하여 약 40%의 빠른 건조율을 나타내었다. 일반성분의 함량에 있어서 조지방, 조단백질, 조섬유 및 회분 함량의 경우 두처리구간 큰 차이가 없었다. 무기질 및 유리당 함량의 경우에 있어서도 두 처리구간 큰 차이를 나타내지 않았다. 조사포닌 함량의 경우 과열증기 처리 후 열풍건조한 인삼분말의 조사포닌 함량은 5.43% 그리고 열풍건조만 한 인삼분말의 조사포닌 함량은 5.4%로 두시료간 큰 차이가 없었다. 색깔의 경우 적색도를 나타내는 a값에서 과열증기 건조 후 열풍건조 처리한 인삼분말이 열풍건조한 인삼분말에 비하여 약간 높은 결과를 나타내었다. 인삼분말의 미생물 수의 경우 과열증기 건조 후 열풍 건조한 인삼분말이 열풍건조한 인삼분말에 비하여 일반세균 및 효모곰팡이가 약 2 log 정도 감소하였고 대장균군의 경우는 약 1 log 정도 감소한 결과를 나타내었다.
Recently, three-dimensional (3D) cell culture systems, which are superior to conventional two-dimensional (2D) vascular systems that mimic the in vivo environment, are being actively studied to reproduce drug responses and cell differentiation in organisms. Conventional two-dimensional cell culture methods (scaffold-based and non-scaffold-based) have a limited cell growth rate because the culture cannot supply the culture medium as consistently as microvessels. To solve this problem, we would like to propose a 3D culture system with an environment similar to living cells by continuously supplying the culture medium to the bottom of the 3D cell support. The 3D culture system is a structure in which microvascular structures are combined under a scaffold (agar, collagen, etc.) where cells can settle and grow. First, we have manufactured molds for the formation of four types of microvessel-mimicking chips: width / height ①100 ㎛ / 100 ㎛, ②100 ㎛ / 50 ㎛, ③ 150 ㎛ / 100 ㎛, and ④ 200 ㎛ / 100 ㎛. By injection molding, four types of microfluidic chips were made with GPPS (general purpose polystyrene), and a 100㎛-thick PDMS (polydimethylsiloxane) film was attached to the top of each microfluidic chip. As a result of observing the flow of the culture medium in the microchannel, it was confirmed that when the aspect ratio (height/width) of the microchannel is 1.5 or more, the fluid flows from the inlet to the outlet without a backflow phenomenon. In addition, the culture efficiency experiments of colorectal cancer cells (SW490) were performed in a 3D culture system in which PDMS films with different pore diameters (1/25/45 ㎛) were combined on a microfluidic chip. As a result, it was found that the cell growth rate increased up to 1.3 times and the cell death rate decreased by 71% as a result of the 3D culture system having a hole membrane with a diameter of 10 ㎛ or more compared to the conventional commercial. Based on the results of this study, it is possible to expand and build various 3D cell culture systems that can maximize cell culture efficiency by cell type by adjusting the shape of the microchannel, the size of the film hole, and the flow rate of the inlet.
청국장의 대중화에 있어서 가장 큰 걸림돌이 되고 있는 $2{\sim}3$개월의 짧은 유통기간과 유통기한 내의 제품에서 곰팡이가 번식하는 등 저장성 문제점들을 해결하고자 종균 배양 및 접종, 저온살균을 통한 위생적 제조/가공방법, 포장방법 개선 등의 연구를 수행하였다. 살균온도, 저장온도, 저장기간을 최적화하기 위한 각각의 조건에서 진균류, 생균수, 가스발생량, pH 및 아미노태 질소 등을 측정하고 SAS program의 반응표면분석법으로 monitoring하여 유통과정에서의 품질변화를 측정하였다. 진공포장과 일반포장 제품에서 진균류는 나타나지 않았으며 생균수는 진공포장과 일반포장 둘 다 살균온도에 따른 영향이 가장 큰 것으로 나타났다. 가스발생량에 대한 저장조건의 영향은 진공포장의 경우 살균온도에서 가장 큰 영향을 받았고, 일반포장이 진공포장보다 가스발생량이 훨씬 많았다. pH변화는 진공포장과 일반포장 모두 저장온도가 가장 큰 영향을 미치는 것으로 나타났다. 아미노태 질소 함량에는 진공포장과 일반포장 모두에서 저장온도, 저장기간, 살균온도의 순으로 영향을 미치는 것으로 나타났고 진공포장 한 것이 저장 중 아미노태 질소 함량 변화가 적었다. 진공포장 조건이 미생물에 의한 계속적인 분해 작용을 억제함을 알 수 있었다. 위 결과를 토대로 본 연구에서 종균배양 접종을 통한 위생적인 제조 방법으로 청국장을 제조하여, 진공포장하고, $70^{\circ}C$에서 60분간 살균하여, $10^{\circ}C$ 이하 저장조건에서 6개월 이상까지 저장이 가능한 제품을 생산할 수 있었으며, 제조 및 포장공정의 개선으로 청국장의 상품성을 크게 증가시키는 것이 가능할 것으로 사료된다.결정형태에는 크게 영향을 미치지 않으나 전분의 무정형 부분에 영향을 주어 쌀 전분의 팽윤력, 용해도 및 pasting property등의 물리화학적 성질에 변화를 주는 것으로 판단되었다.on 억제활성성분이 존재한다는 것을 시사한 것이다. 2004년과 같이 한발이 심한 해에는 이랑방향 $180^{\circ}$의 수량성이 대조구인 $120^{\circ}$보다 낮았으나 상대적으로 한발이 적은 2005년도에는 $180^{\circ}$가 대조구보다 높은 수량을 보였다.추출물은 87.15%의 높은 암세포 생육억제활성을 나타내었다. 동일 농도에서 발아 길이 5 mm인 시료의 경우 SNU-601에 대하여 85.33%의 억제효과를 보였다. 그러나 유방암세포인 MCF-7과 대장암세포인 Caco-2의 경우 최대농도의 시료를 첨가한 경우에도 세포증식을 억제하지 못하였다. 메밀의 발아 길이별 $IC_{50}$값을 살펴보면, Calu-6에서 발아 길이 5 mm 추출물에서 $301.06\;{\mu}g/mL$, SNU-601에서 2 mm 추출물이 $510.20\;{\mu}g/mL$로 탁월한 효과를 보였다. 즉, Calu-6와 SNU-601 세포주에 대한 $IC_{50}$은 대조군에 비해 발아에 의하여 세포독성 효과를 증가되었지만, MCF-7와 Caco-2에 대한 항암효과는 없음을 알 수 있었다.것으로 사료된다.높게 인식할수록 재방문의도 및 추천의도가 커지는 것을 알 수 있었다. 대학교 급식소 운영주체에 대한 소비자 인지도 조사결과 향후 대학교 급식소를 운영하는 위탁급식 전문업체의 경우 그들의 브랜드를 알리기 위한 홍보전략이
마즙의 위생성 및 보존성 향상을 목적으로 0, 1, 3 및 5 kGy의 선량으로 감마선을 조사하고 $5^{\circ}C$에서 보관하면서 8일간 마즙의 미생물학적, 일반품질 및 관능평가를 실시하였다. 마즙의 호기성세균 및 대장균군은 각각 1.26 및 1.34 kGy의 $D_{10}$값을 보였으며, $5^{\circ}C$ 저장에 따라 3 및 5 kGy 조사구의 경우 검출한계 이하의 균수를 유지하였다. 효모 및 곰팡이의 D10값은 0.29 kGy로 일반호기성균 및 대장균군 보다 감마선에 높은 감수성을 보였으며, 모든 조사구의 경우 냉장저장에 따라 검출한계 이하의 균수를 나타내었다. 감마선 조사에 따른 마즙의 점성은 조사 선량이 증가할수록 유의적으로 감소하는 경향을 나타내 마즙 특유의 고점성으로 인한 단점을 보완하여 음용의 편이성을 증대시킬 수 있을 것으로 사료된다. 마즙의 $L^*$값은 감마선 조사에 따라 감소하였으나 냉장저장에 따른 $L^*$값의 감소율은 비조사구가 가장 켰으며, $b^*$값 또한 감마선 조사에 의해 증가해 갈변이 일어나는 것으로 관찰되었다. 3 및 5 kGy 마즙은 맛을 제외한 조직감, 색, 냄새 및 전체적인 기호도에서 비조사구보다 유의적으로 낮은 선호도를 보였으며, 1 kGy 조사구는 냄새와 색을 제외하고 비조사구와 차이가 없었다. 이상의 결과를 종합하여 볼 때, 조사에 따른 색의 변화를 최소화하기 위한 항산화제 첨가 또는 포장방법 및 방사선 조건 등에 대한 좀 더 다양한 연구가 보완되어야 할 것으로 판단되며, 약 1 kGy 감마선 조사와 냉장저장을 병행함으로써 마즙의 품질을 향상시킬 수 있을 것으로 사료된다.
경주 월성은 파사니 사금(婆裟尼師今)때 축조된 신라의 왕성으로서 정치적 군사적으로 매우 중요한 역할을 했던 유적이다. 그러한 월성을 에워싸고 있는 월성해자는 전시(戰時)에는 적으로부터 성을 보호하는 방어적 역할과 함께 통일신라시대에 이르러서는 조경의 역할을 담당한 시설물이다. 월성해자 유적의 발굴은 1985년부터 시작되어 현재 까지 이어지고 있으며, 수많은 유물들이 출토되고 있다. 그 중 다량 다종의 수막새들은 신라 초기부터 통일기를 거쳐 그 이후 시기까지 신라시대 막새의 변화 양상을 보여주는 중요한 자료로서 그 가치는 매우 높다 할 수 있다. 기와는 왕궁(王宮), 사찰(寺刹), 산성(山城) 등 국가적인 사업으로 이루어진 건물에서부터 일반적인 기타 건물지까지 가장 널리 사용되었으며, 수량에서도 다른 유물들에 비해 절대적인 우위를 차지하고 있다. 그럼에도 지금까지의 연구 성과는 가장 취약한 분야로 남아있으며, 앞으로 연구되어야 할 과제들이 무궁하게 남아있는 분야라 할 수 있다. 최근 수많은 발굴을 통한 기와 수량의 급격한 증가와 함께 활발한 연구가 이루어지고 있으나, 일반적인 문양의 계보와 제작과정 등에 한정되어 진행되어 온 것이 사실이다. 이에 여기서는 월성해자 출토 단판연화문 수막새를 대상으로 동범와에 관한 판별을 하고자한다. 그 동안 유사와(類似瓦), 동형와(同形瓦)등으로만 판단되었던 막새들의 세부적 특징을 비교해 "동범와"임을 정확히 확인하고자 한다. 동범와에 관한 정확한 판단방법, 동범와로 묶인 형식의 시간적 순서 배열과 동범와가 출토되는 위치 등을 파악함으로써 동범와 판별에 대한 중요성을 강조하고자 한다. 그 결과 다종의 수막새에서 하나의 범(范)으로 찍어낸 막새, 즉 동범와를 판별할 수 있었으며 이러한 동범와들은 출토위치에서 다시 하나로 묶이는 공통점이 확인된다. 동범와의 출토위치를 통해 월성해자의 시기적인 변천이 어떻게 이루어 졌는지와 주변유적인 안압지와의 연관성도 살펴볼 수 있다. 현재 와범이 확인되지 않아 역으로 막새들의 세부적 특징을 비교해 동범와를 파악할 수 밖에 없는 실정이 다. 하지만 여기서는 동범와라는 용어사용에 있어 동범요소의 정확한 확인 후에 사용되어져야 함을 강조하고, 월성해자 동범와를 통해 월성해자의 지역별 시기를 알아보았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.