• International Journal of Fluid Machinery and Systems
• /
• v.7 no.3
• /
• pp.125-129
• /
• 2014

The paint removal and recoating are the very important process in airplane maintenance. The traditional technology is to use the chemical way corroding the paint with paint remover. For changing the defects, corrosion & pollution & manual working, of the traditional technology, the physical process which removes the paint of airplane with 250MPa/250kW ultra-high pressure rotary water jetting though the surface cleaner installed on the six axes robot is studied. The paint layer of airplane is very thin and close. The contradiction of water jetting paint removal is to remove the paint layer wholly and not damage the surface of airplane. In order to solve the contradiction, the best working condition must be reached through tests. The paint removal efficiency with ultra-high pressure and move speed of not damaged to the surface. The move speed of this test is about 2m/min, and the paint removal efficiency is about $30{\sim}40m^2/h$, and the paint removal active area is 85-90%. No-repeat and no-omit are the base requests of the robot program. The physical paint removal technology will be applied in airplane maintenance, and will face the safety detection of application permission.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.376-379
• /
• 1993

GoldStar Industrial Systems Co. R & D center successfully developed the inverter for welding under the support of GoldStar Electric Machinery Co. Now, we are currently working on the mechanical part of articulated robot and a high-performance general purpose motion controller. By combining the above three items, we will be able to constitute the complete welding robot system on our own. In this article. the welding robot system currently under developing is introduced. The main focus will be placed on the development of general purpose motion controller with welding control module. Therefore, the architecture of welding robot controller where the general purpose motion controller is combined with the welding controller module will be explained. Here, the software system will be explained with regard to the hardware system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.713-716
• /
• 2007

This paper presents the fabrication of an electro-luminescence display, which is whollyprinted on a flexible paper substrate. We expect that the printed EL display can be a powerful alternative for general advertisement which is printed only with media ink.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.3
• /
• pp.582-604
• /
• 2013

The machinery industry provides infrastructure to many manufacturing industries and it has strong influences on performance and quality of products. However, Korean economic growth has been constantly causing the korean general machinery industry to significantly depend on Japan. To solve this problem, many industrial policies have been tried. In this paper, we divide the value chain of general machinery industry into four steps; technology development step, manufacturing step, marketing step, and after-sales management step. We study the relationships between each of these steps and the awareness of dependency on Japan. For empirical analysis we surveyed 207 domestic companies in general machinery industry. The findings are that the three factors, technology development competency, marketing competency and after-sales management competency have significant relationships with dependence on Japan. Manufacturing competency is not a significant factor. As control variables, the type of manufacturers has effect on dependency on Japan. The company size, the kinds of products and technology levels of products don't have effects on the relationship between the four steps of the value chain and dependency on Japan. To overcome the trade imbalance with Japan in the general machinery industry, we recommend to develop technology development competency, marketing competency, and after-sale management competency. Also we need to adopt industry supporting policies, not depending on all three control variables of company sizes, the kinds of products and the technology levels of products, but depending on the type of manufacturers.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.295-304
• /
• 2003

In this study, a rotary equipped with devices for preventing alien substance from being wound and for preventing soil adherence were developed and their performances are evaluated in the field. The former device was effective in the paddy field with low moisture content, but power requirement of rotary tilling was increased in the field with high moisture content. In the field test of rotaries equipped with device to prevent the power requirements were measured to be 52.18, 52.44, 49.01 and 46.34 PS for general, stainless steel, rubber and PE rotaries, and the quantities of the soil adhered to rotaries, on the average, were to be 5.6, 5.7, 3.1 and 2.7 kg for general, stainless steel, rubber and PE rotaries, respectively. The PE rotary cover reduced the power requirement and soil adherence by 11 and 52%, respectively.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.223-227
• /
• 2013

Purpose: The objectives of this study were to develop a general purpose baler system that is appropriate for the domestic forage cultivation environment and operated by the medium size tractor for production of bale silage made of green forage crops, and to test its performance. Methods: In a first experiment, the time of formation per one bale and densities of bales that are produced from bale system, were measured. In a second experiment, power requirement was measured by a power measurement system manufactured during bale system work. Results: The power measurement system was constructed with strain-gage sensors to measure torque of a PTO axle and proximity sensor to measure rotating speed of a PTO axle. Thus, the power requirement was calculated by PTO torque and PTO rotating speed. For evaluation of bale quality, the samples of bales were analyzed for contents of moisture, ADF, NDF and TDN. Conclusions: If the results of this study will be utilized, the coefficient of utilization of agricultural machinery will be increased by the operation of a medium size tractor that is a major disseminated tractor in farm, and it will contribute tremendously to make a forage production base for livestock farms.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.14-25
• /
• 2019

From 2019 onwards, more stringent regulations (from Stage 4 to Stage 5) are to be implemented in Europe in order to reduce the air pollutant emissions. In South Korea, the government authorities started to make new regulation to meet the European regulation. As a first step, the air pollutant emissions such as CO, NOx, SOx, TSP, $PM_{10}$, $PM_{2.5}$, VOC, $NH_3$ by agricultural machinery were analyzed based on CAPSS inventory along with the analysis in the general aspect in this study. Three levels of analysis was conducted each in agricultural machinery aspect along with in the general aspect. Per agricultural tractor, all kinds of the air pollutant emissions decreased by 25, 25, 99, 25, 25, 25, 25% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014. Per combine harvester, all kinds of the air pollutant emissions decreased by 63, 63, 91, 63, 63, 63, 63% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.450-450
• /
• 2000

This paper presents a software design simulation method for controlling multiple mechanism carrier system (MMCS), which is mainly used in a wrapping machine or a case packing machine. This method uses a mechanical tool-work interactive model proposed in this paper, in order to represent the interactive behaviors between some tools and a work driven by their tools, in which low effect states of a work are defined. Based on this method, a 3-D simulation system has been built. It consists of shape modeling of each device, behavior definitions of tools, and control logic using if-then expression. By applying it to a ase packing machine having about 30 mechanical devices and 100 inputs/outputs for control, the effectiveness of this method has been shown in general verification of control logic specification in an early software design phase and the possibility of smooth communication tool between mechanical and software designers.

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.30-34
• /
• 2015

The Maglev(UTM-02) project is leading by Korea Institute of Machinery & Materials and financially supported from the ministry of Commerce, Industry and Energy. The early development stagy of Maglev(UTM-02) was adopted the general urban railway pneumatic brake system due to the Korea domestic industrial environment. Currently there is two commercial operation Light Railway Train(LRT) system in Korea. One is U-Line in Uijungbu, and the other is Everline in Yongin. Both LRT systems are adopting high performance light weight hydraulic brake system. But those design and manufacturing core technology of the brake system is came from a major brake system companies located from aboard. Currently various studies have been continued to increase practical application and to improve competitiveness on performance for each sub-system of Maglev. Also in case of brake system, developing competitive hydraulic brake system is required. In this study, we have introduced the development process and performance evaluation of the new hydraulic brake system of Maglev.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2160-2163
• /
• 2005

Solid freeform fabrication (SFF) technology plays a major role in industry and represents a reasonable percentage of industrial rapid prototyping/tooling/manufacturing (RP/RT/RM) development applications. However, SFF technology still has long way to progress to achieve satisfactory process speed, surface finish and overall quality improvement of its application. Today, three dimensional printing (3DP) technique that is one of SFF technology is receiving many interests, and is applied by various fields. It can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. However, need long curing time after manufacture completion. And it must do post-processing process necessarily to heighten strength of objects because strength of fabricated objects is very weak. Therefore, in this study, we proposed an improved 3DP process that can solve problems of conventional 3DP process. The general 3DP process is method to spout binder simply through printer head on powder, but proposed process is method to cure jetted UV resin by UV lamp after jet UV resin using printhead on powder. The hardening of resin is achieved strongly at early time by UV lamp in proposed method. So, the proposed process can fabricate three dimensional objects with high speed without any post-processing.