• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.225-232
• /
• 2007

A tooth profile modification for loaded gears is used to avoid a tooth impact. Since a tooth profile error causes amplification of the cumbersome whine noise in automotive gear transmissions, an optimal quantity of tooth profile modifications must be obtained for good performance in the vibration sense. In this paper, a tooth profile modification curve considering profile manufacturing errors and elastic deformation of the gear tooth is formulated; in addition, transmission errors of the gear system with modified teeth are verified. The equivalent excitation due to transmission errors is formulated. For experimental evaluation of the transmission error, the transmission error for a simple gear system was measured by two rotational laser vibrometers. Finally, we perform a comparative analysis between the calculated and measured responses to the excitations due to the transmission error to verify the practicability of the application to automotive transmissions.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1978-1988
• /
• 2004

Hybrid finite element analysis was used to analyze the influence of bearing stiffness on the static properties of a planetary gear system with manufacturing errors. The effects of changes in stiffness were similar for most of the manufacturing errors. State variables were most affected by the stiffness of the planet ,bearings. Floating either the sun or carrier helps to equal load sharing and minimizes the critical tooth stress. The effects of a floating sun and carrier are similar, but it is not recommended that both float, because this can induce greater critical tooth stress. Planet bearing stiffness should be optimized. Both load sharing and critical tooth stress should be considered to determine optimal bearing stiffness.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1312-1319
• /
• 1988

본 연구에서는 임의의 내접치차를 가공하기 위한 구형호브를 설계하는데 그 목적이 있으며 GTP를 구하는 방법으로는 CAD의 envelope 이론을 도입하여 근사해법이 아닌 해석적 방법으로 GTP를 구하였으며 이는 여러 오차 해석에서도 유용하게 이용되 었다.또한 호브의 설계를 위한 전산 프로그램을 개발하여 가공하고자 하는 내접치 차의 데이터로 부터 압력각, 이두께 및 피치의 값을 수정하여 호브를 설계함과 동시에 여유면 가공량을 등을 바로 계산할 수 있도록 하였으며 이에 의한 구형 호브의 설계에 를 제시하였다.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1534-1542
• /
• 1996

Gear vibration is caused by the mesh stiffness, gear accuracy, and assembling errors. For these reasons, helical gear has the azial, radial, and rotational vibrations. In this study, the mesh stiffness is calculated by considering the tooth bending, contact, and foundation deformations. Rotational vibration of helical gear with tooth error is modeled by the nonlidear equation of motion with single degree of freedom and is anlyzed numerically. Also, by a specially designed experimental set-up, the analysis are cross-checked and the vibration characteristics of helical gear are discussed.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.606-621
• /
• 2004

A dynamic analysis using a hybrid finite element method was performed to characterize the effects of a number of manufacturing errors on bearing forces and critical tooth stress in the elements of a planetary gear system. Some tolerance control guidelines for managing bearing forces and critical stress are deduced from the results. The carrier indexing error for the planet assembly and planet runout error are the most critical factors in reducing the planet bearing force and maximizing load sharing, as well as in reducing the critical stress.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.635-640
• /
• 2001

The small gear reductioner noise is caused by gear accuracy, assembling errors, and gear backlash. This main study is an investigation on noise quality of the small gear reductioner through the change of gear backlash. In this study included Gear design parameters related the small gear reductioner, the knowledge of rattle noise related gear backlash, and the experimentation results of the small reductioner noise through change of gear backlash. At last, this study propose the least method of the small gear reductioner noise that is caused by suitable existence of gear backlash.

• 한국기계연구소 소보
• /
• 통권15호
• /
• pp.25-35
• /
• 1985

During one revolution of a gear, the intensity of the gear-meshing noise or vibration will vary, depending upon the run-out in the pitch diameter of the gear. Here noise can be produced bu excentricity of the shaft with respect to the base circle and by pitch errors. According to the noise generated is clearly dependent on the force and the amount of energy expended in elastically straining the machine member. The purpose of this paper is to discuss the analysis of the noise and technical reduction of gear noise for machine tool.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.43-53
• /
• 1990

본 연구에서는 변속장치로 사용되는 유성치차장치에 있어서 특히 피치오차와 편심오차가 동시에 존재할 경우도 고려하여 내접치차, 태양치차 혹은 유성캐리어 등이 각각 고정되었을 경우의 회전호차를 해석하였다. 이러한 해석을 통하여 각 치차의 오차에 의한 태양치차 혹은 내접치차의 중심변위궤적을 컴퓨터 시뮬레이션으로 화면상 에 나타나게 하여 실제 태양치차나 내점치차의 중심변위를 측정했을 때 그 변위 궤적 만을 보고도 오차가 존재하는 치차를 진달할 수 있도록 한다. 또, FFT(Fast Fourie- r Transform)를 이용한 파워 스펙트럼 분석법을 도입하여 컴퓨터 프로그램을 작성한 후 이를 이용하여 변위신호의 주파수 분석을 수행함으로써 이 방법이 치차의 오차 진 단에 더욱 효율적임을 밝히고자 한다.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.364-373
• /
• 2001

The gear whine noise of vehicle transmission is directly correlated tilth the gear transmission error of mating gear The object of this study is to build up the synthesized countermeasure for the reduction of gear whine noire of vehicle transmission by developing the program which can be used to analyze and predict the vibrational characteristics caused by gear transmission error of mating gears of vehicle transmission. The developed mathematical models on the elements of transmission, for example, helical gear pairs, bearings and shafts are used and the modeling of the excitation forces are developed by the gear transmission error of mating gear which is defined by the amount of the elastic deformation of gear tooth & shaft and gear profile & lead errors. The mathematical system model of vehicle transmission developed by the substructure synthesis method Is also verified by the experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2390-2392
• /
• 2001

The small gear head noise is caused by gear accuracy, assembling errors, and gear backlash. This main study is an investigation on noise quality of the small gear head through the change of gear backlash. In this study included gear design parameters related the small gear head, the knowledge of rattle noise related gear backlash, and the experimentation results of the small head noise through change of gear backlash. At last, this study propose the least method of the small gear head noise that is caused by suitable existence of gear backlash.