• 전자공학회논문지
• /
• 제51권8호
• /
• pp.172-177
• /
• 2014

두 가지 $N_2$ 프로세스(성장 중 반응성 질소 그리고 질소 플라즈마 경화)에 의해 특별히 개선된 AsGeTeS 위에 만들어진 문턱 스위칭 소자를 제시하고자 한다. 적층과 열적 안정적인 소자 구조가 가능한 두 스텝 프로세스에서의 질소의 사용은 나노급 배열 회로의 응용에서의 스위치와 메모리 소자의 집적을 가능하게 한다. 이것의 좋은 문턱 스위칭 특성에도 불구하고 AsTeGeSi 기반의 스위치는 높은 온도에서의 신뢰성 있는 저항 메모리 적용에 중요한 요소를 가진다. 이것은 보통 Te의 농도 변화에 기인한다. 그러나 chalconitride 스위치(AsTeGeSiN)은 $30{\times}30(nm^2)$ 셀에서 $1.1{\times}10^7A/cm^2$가 넘는 높은 전류 농도를 갖는 높은 온도 안정성을 보여준다. 스위치의 반복 능력은 $10^8$번을 넘어선다. 더하여 AsTeGeSiN 선택 소자를 가진 TaOx 저항성 메모리를 사용한 1 스위치-1저항으로 구성된 메모리 셀을 시연하였다.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.585-593
• /
• 2008

In this work, we report several experimental data capable of evaluating the phase transformation characteristics of GeSbTe pseudobinary thin films comprehensively utilized as phase change materials. The phase transformation of the GeSbTe thin films was confirmed by XRD measurement from amorphous to hexagonal structure via fee structure except for $Ge_8Sb_2Te_{11}$. In addition, X-ray photoelectron spectra analysis revealed to weaken Ge-Te bond for $Ge_2Sb_2Te_5$ and to strengthen the bonds of all elements for $Ge_8Sb_2Te_{11}$ during the amorphous to crystalline transition. The values of optical energy gap $(E_{OP})$ were around 0.71 and 0.50 eV and the slopes of absorption in extended region (B) were ${\sim}5.1{\times}10^5$ and ${\sim}10{\times}10^5cm^{-1}{\cdot}V^{-1}$ for the amorphous and fcc-crystalline structures, respectively. Finally, the kinetics of amorphous-to-crystalline phase change on the GeSbTe films was characterized using a nano-pulse scanner with 658-nm laser diode (power; $1{\sim}17$ mW, pulse duration; $10{\sim}460$ ns).

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.507-513
• /
• 1996

Nonlinear optical properties of TeO2-PbO-GeO2 glasses were investigated and their correlation with struc-tural modification was investigated. Third-order nonlinear susceptibility $\chi$, ranged between 5.0$\times$10-13 esu and 10.7$\times$10-13 esu which are approximately 20-40 times larger than that of silica glass. The glass with a composition of 85(80TeO2-20PbO)-15GeO2(mol%) seemed to provide an optimum compromise between $\chi$and the stability against crystallization. Analyses of the Raman spectra suggested that these glasses are mainly composed of [TeO4] tbp, [TeO3]tp and [GeO4] tetrahedral structural units. It was concluded that the positive contribution of Pb2+ with high polarizability to $\chi$ in TeO2-PbO glasses overwhelmed the negative influence due to the structural modification of [TeO4]tbplongrightarrow[TeO3]tp. On the other hand addition of GeO2 in TeO2-PbO-GeO2 glasses resulted in the decrease of $\chi$ values. This behavior was attributed to the formation of [GeO4] polyhedra at the expense of [TeOn] polyhedra and Pb2+ ions which normally sowed a higher contribu-tion to $\chi$ than [GeO4] polyhedra.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.378-378
• /
• 2013

칼코겐화물의 일부는 전류 등의 에너지 입력에 따라 결정구조가 비정질 및 결정 사이에서 가역적으로 변화하며 상변화에 따라 전기 저항이 바뀌는 특성을 가지고 있다. 이와 같은 칼코겐화물 상변화 재료의 장점을 이용하여 프로그래머블 스위치를 구현할 수 있다. 그러나 상변화 재료만을 이용하는 프로그래머블 스위치는 전기신호 누설의 문제점이 발생한다. 이러한 문제점을 해결하기 위해서 지난 연구에서는 문턱 스위칭 칼코겐화물을 포함하는 다층구조 스위치를 제안하였다. 본 연구에서는 프로그래머블 스위치의 구성물질로서 문턱 스위칭 특성을 보이는 GeTe 박막의 특성을 보고한다. RF magnetron sputtering 방식을 이용하여 GeTe 박막을 증착하고 온도에 따른 결정화 양상 및 표면 형상 변화를 관찰하였다. GeSbTe 박막의 경우 $100^{\circ}C$ 근방에서 결정화가 시작되었고, 온도가 증가할수록 결정화가 급격히 진행되었다. 반면 GeTe 박막에서는 온도 증가에 따른 결정화가 거의 일어나지 않았다. 이러한 결과로부터 GeTe 합금 박막은 프로그래머블 스위치의 구성요소로서 문턱 스위칭에 적합한 물질임을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.83-84
• /
• 2006

For phase transition method, good recording sensitivity, low heat radiation, fast crystallization and hi-resolution are essential. Also, A retention time is very important part for phase transition. In our presentation wall, we chose Ge-Se-Te material to use a Se material which has good optical sensitivity than Sb. A Ge-Se-Te sample was fabricated and Irradiated with He-Ne laser and DPSS laser to investigate a reversible phase change by light.

• Applied Science and Convergence Technology
• /
• 제24권3호
• /
• pp.60-66
• /
• 2015

The modified amorphous GeTe formed by pulsed laser irradiation in as-grown GeTe has been analyzed in terms of variations of local bonding structure using extended x-ray absorption fine structure (EXAFS). The modified GeTe film has octahedral-like Ge-Te bonding structure that can be effectively induced by irradiation process. The EXAFS data clearly shows that the irradiation can lead to reduction of the average coordination number. Variations in the transition temperature for the irradiated film during crystallization can be described by the presence of octahedral-like local structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.134-134
• /
• 2009

In this work, we report that crystallization speed as well as the electrical and optical properties about the N-doped $Ge_2Sb_2Te_5$ thin films. The 200-nm-thick N-doped $Ge_2Sb_2Te_5$ thin film was deposited on p-type (100) Si and glass substrate by RF reactive sputtering at room temperature. The amorphous-to-crystalline phase transformation of N-doped $Ge_2Sb_2Te_5$ thin films investigated by X-ray diffraction (XRD). Changes in the optical transmittance of as-deposited and annealed films were measured using a UV-VIS-IR spectrophotometer and four-point probe was used to measure the sheet resistance of N-doped $Ge_2Sb_2Te_5$ thin films annealed at different temperature. In addition, the surface morphology and roughness of the films were observed by Atomic Force Microscope (AFM). The crystalline speed of amorphous N-doped $Ge_2Sb_2Te_5$ films were measured by using nano-pulse scanner with 658 nm laser diode (power : 1~17 mW, pulse duration: 10~460 ns). It was found that the crystalline speed of thin films are decreased by adding N and the crystalline temperature is higher. This means that N-dopant in $Ge_2Sb_2Te_5$ thin film plays a role to suppress amorphous-to-crystalline phase transformation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.21-22
• /
• 2008

In the paper, we report several experimental data capable of evaluating the phase transformation characteristics of $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ (x =0, 0.05, 0.1) thin films. The $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ phase change thin films have been prepared by thermal evaporation. The crystallization characteristics of amorphous$Ag_x(Ge_2Sb_2Te_5)_{1-x}$ thin films were investigated by using nano-pulse scanner with 658 nm laser diode (power; 1~17 mW, pulse duration; 10~460 ns) and XRD measurement. It was found that the more Ag is doped, the more crystallization speed was 50 improved. In comparision with $Ge_2Sb_2Te_5$ thin film, the sheet resistance$(R_{amor})$ of the amorphous $Ag_x(Ge_2Sb_2Te_5)_{1-x}$ thin films were found to be lager than that of $Ge_2Sb_2Te_5$ film($R_{amor}$ $\sim10^7\Omega/\square$ and $R_{cryst}$ 10 $\Omega/\square$). That is, the ratio of $R_{amor}/R_{cryst}$ was evaluates to be $\sim10^6$ This is very helpful to writing current reduction of phase-change random acess memory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1426-1427
• /
• 2006

Chalcogenide based phase-change memory has a high capability and potential for the next generation nonvolatile memory device. Fast writing speed, low writing voltage, high sensing margin, low power consume and long cycle of read/write repeatability are also good advantages of nonvolatile phase-change memory. We have been investigated the new material for the phase-change memory. Its composition is consists of chalcogenide $Ge_{1}Se_{1}Te_2$ material. We made this new material to solve problems of conventional phase-change memory which has disadvantage of high power consume and high writing voltage. In the present work, we are manufactured $Ge_{1}Se_{1}Te_{2}/Ge_{2}Sb_{2}Te_{5}/Ge_{1}Se_{1}Te_{2}$ and $Ge_{2}Sb_{2}Te_{5}/Ge_{1}Se_{1}Te_{2}/Ge_{2}Sb_{2}Te_{5}$ sandwich triple layer structure devices are manufactured to investigate its electrical properties. Through the present work, we are willing to ensure a potential of substitutional method to overcome a crystallization problem on PRAM device.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.156-156
• /
• 2010

A detailed investigation and structure of tested samples are clearly presented. As a reference, $Ge_1Se_1Te_2$/As only sample was also investigated. We used compound of Ge-Se-Te material for phase-change cell. Actually, the performance properties have been improved surprisingly then conventional Ge-Sb-Te. However, crystallization time was as long as ever for amorphization time. We conducted this esperiment in order to solve that problem by doping-As with Ag layer.