• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.199-205
• /
• 2010

The crystallization speed (v) of amorphous (InTe)$_x$(GeTe) (x = 0.1, 0.3 and 0.5) films and their thermal, optical and electrical behaviors have been investigated using nano-pulse scanner (wavelength = 658 nm, laser beam diameter < 2 ${\mu}m$), X-ray diffraction (XRD), 4-point probe and UV-vis-IR spectrophotometer. These results were compared with those of $Ge_2Sb_2Te_5$ (GST) film, comprehensively utilized for phase-change random access memory (PRAM). Both v-value and thermal stability of (InTe)$_{0.1}$(GeTe) and (InTe)$_{0.3}$(GeTe) films could be enhanced in comparison with those of the GST. Contrarily, the v-value in the (InTe)$_{0.5}$(GeTe) film was so drastically deteriorated that we could not quantitatively evaluate it. This deterioration is thought because amorphous (InTe)$_{0.5}$(GeTe) film has relatively high reflectance, resulting in too low absorption to cause the crystallization. Conclusively, it could be thought that a proper compositional (InTe)$_x$(GeTe) films (e.g., x < 0.3) may be good candidates with both high crystallization speed and thermal stability for PRAM application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.218.1-218.1
• /
• 2013

GeSbTe 삼원계 칼코겐화물 합금은 광디스크 및 상변화 메모리에서 활성물질로 사용되는 대표적인 재료이다. GeSbTe 합금은 결정질 상과 비정질 상의 두 종류의 상을 갖는데 그 상에 따라 반사율 및 전기저항이 서로 다르기 때문에 활성물질로서 작용한다. GeSbTe 합금 구성원소의 일부를 포함하는 두 종류의 물질로 접합을 형성하고 열처리 공정을 수행함으로써 GeSbTe 합금을 국부적으로 생성하는 방법이 최근에 보고되었다. 이러한 방법을 상변화 메모리 소자 제조에 이용하면 GeSbTe 합금을 제한된 영역에 나노 스케일로 만드는 것이 가능해져서 GeSbTe 합금의 상변화를 유도하는데 필요한 프로그래밍 전류를 낮추는 효과를 얻을 수 있다. 상변화 메모리 소자 내에서의 GeSbTe 합금의 두께 또는 크기는 상변화 메모리 소자의 동작 특성을 좌우하는 중요한 파라미터이며 이것은 열처리 공정 조건에 따라 결정되므로 열처리 공정 조건에 따라 GeSbTe 합금이 생성되는 양상이 어떻게 변화하는지를 밝힐 필요가 있다. 따라서 본 연구에서는 다양한 열처리 온도 조건에서 Ge-Sb-Te 삼성 분계에서의 구성 원소들의 상호확산 거동을 조사하였다. 순수한 Ge 박막과 조성이 다른 SbTe 박막의 접합을 형성하고 773K까지의 온도 범위에서 열처리를 실시하였다. Auger 수직 분석을 이용하여 Ge, Sb, 및 Te 원소의 깊이 방향의 확산 정도를 조사하였으며 그 결과로서 열처리 온도가 증가함에 따라 상호확산 정도가 심해지고 Te 원소가 상호확산에 있어서 중요한 역할을 한다는 사실을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.297.1-297.1
• /
• 2014

칼코겐화합물은 주기율표 6족에서 산소를 제외한 칼코겐 원소가 하나 이상 포함되는 화합물 반도체 소재로 상변화 및 광전변환 특성을 가지고 있다. 이와 같은 칼코겐화합물의 장점을 이용하여 집적회로의 로직 블록 간의 신호 전달을 제어하는 프로그래머블 스위치를 구현 할 수 있다. 본 연구에서는 프로그래머블 스위치에 적용 가능한 칼코겐화합물로 널리 알려진 GeSbTe 및 GeTe 박막의 도핑에 따른 전기적, 구조적 특성 변화를 보고한다. RF magnetron sputtering 방식을 이용하여 doped GST 및 doped GeTe 박막을 증착하고 도핑에 따른 전기적, 구조적 특성을 관찰하였다. GST 박막의 경우 도핑에 의해 면저항 값이 증가하고 결정화 온도가 상승하는 것을 확인하였다. 반면 GeTe 박막에서는 도핑에 의해 면저항 값이 감소하고 결정화 온도가 낮아지는 것을 확인하였다. 이러한 결과로부터 GeSbTe 및 GeTe 박막의 전기적 특성은 도핑에 따라 변화하며, 도핑 조건을 적절히 조절함으로써 프로그래머블 스위치에 적용 가능한 칼코겐화합물의 확보가 가능하다는 결론을 내릴 수 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.411-414
• /
• 2008

The germanium films were deposited by metal organic chemical vapor deposition using $Ge(allyl)_4$ precursors on TiAlN substrates. Deposition of germanium films was only possible with a presence of $Sb(iPr)_3$, which means that $Sb(iPr)_3$ takes a catalytic role by a thermal decomposition of $Sb(iPr)_3$ for Ge film deposition. Also, as Sb bubbler temperature increases, deposition rate of the Ge films increases at a substrate temperature of $370^{\circ}C$. The GeTe thin films were fabricated by MOCVD with $Te(tBu)_2$ on Ge thin film. The GeTe films were grown by the tellurium deposition at $230-250^{\circ}C$ on Ge films deposited on TiAlN electrode in the presence of Sb at $370^{\circ}C$. The GeTe film growth on Ge films depends on the both the tellurium deposition temperature and deposition time. Also, using $Sb(iPr)_3$ precursor, GeSbTe films with hexagonal structures were fabricated on GeTe thin films. GeSbTe films were deposited in trench structure with 200 nm*120 nm small size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.419-420
• /
• 2008

In this work, we report several experimental data capable of evaluating the phase transition characteristics of (InTe)x(GeTe)y (x = 0.1, 0.3, y =1) pseudo-binary thin films. (InTe)x(GeTe)y phase change thin films have been prepared by thermal evaporator. The crystallization characteristics of amorphous (InTe)x(GeTe)y thin films were investigated by using nano-pulse scanner with 658 nm laser diode (power : 1~17 mW, pulse duration : 10~460 ns) and XRD measurement. It was found that the crystalline speed of In-Ge-Te thin films are faster than $Ge_2Sb_2Te_5$[1] and also the crystalline temperature is higher. Changes in the optical transmittance of as-deposited and annealed films were measured using a UV-VIS-IR spectrophotometer and four-point probe was used to measure the sheeresistance of InGeTe films annealed at different temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.408-413
• /
• 2016

The dielectric thin films applied to multi-colored semitransparent thin film solar cells have been extensively studied. In this work, we prepared GeSbTe and GeTe chalcogenide thin films using magnetron sputtering, and investigated their optical and phase-change properties to replace the dielectric films. The changes of surface morphology, sheet resistance, and X-ray diffraction of the Te-based chalcogenide films support the fact that the amorphous stability of GeTe films is superior to that of GeSbTe films. While both amorphous GeSbTe and GeTe films thinner than 30 nm have optical transparency between 5% and 60%, GeTe films transmit more visible light than GeSbTe films. It is confirmed by computer simulation that the color of semitransparent silicon thin film solar cells can be adjusted with the addition of GeSbTe or GeTe films. Since it is possible to adjust the contrast of the solar cells by exploiting the phase-change property, the two kinds of chalcogenide films are anticipated to be used as an optical layer in semitransparent solar cells.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.144-147
• /
• 2017

In this study, $Ge_2Sb_2Te_5$ and $Ge_8Sb_2Te_{11}$ were used as an insulator layer to fabricate ReRAM devices. The resistance change is correlated to the appearance or disappearance of a conductivity filament at the surface of the GeSbTe layer. Changes in the electrical properties of ITO/GeSbTe/Ag devices were measured using a I-V-L measurement system. As a result, compared to the $ITO/Ge_8Sb_2Te_{11}/Ag$ device, this $ITO/Ge_2Sb_2Te_5/Ag$ ReRAM device exhibits highly uniform bipolar resistive switching characteristics, such as the operating voltages, and the resistance values.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.140.2-140.2
• /
• 2016

Despite the growing interest in GeTe as a archetypal displacive ferroelectric material as well as the basis of related materials used in data-storage applications, atom-resolved study of single crystalline GeTe surface been lacking. Using low temperature scanning tunneling microscopy (STM) and spectroscopy (STS), we investigated as-cleaved and annealed surfaces of GeTe. We found that as-cleaved GeTe(111) surface is composed of at least two kinds of terraces at 78 K. While two terraces show metallic characteristics, they also exhibit distinctive I-V spectra and imaging conditions, with each being attributed to Ge-terminated, and Te-terminated surfaces respectively. GeTe(111) surfaces annealed at moderately elevated temperature introduces intricate networks of extended defect structures. We will present these data and discuss the role of vacancies in the formation of these structures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.918-922
• /
• 2006

Chalcogenide Phase change memory has the high performance necessary for next-generation memory, because it is a nonvolatile memory with high programming speed, low programming voltage, high sensing margin, low power consumption and long cycle duration. To minimize the power consumption and the program voltage, the new composition material which shows the better phase-change properties than conventional $Ge_2Sb_2Te_5$ device has to be needed by accurate material engineering. In the present work, we investigate the basic thermal and the electrical properties due to phase-change compared with chalcogenide-based new composition $Ge_1Se_1Te_2$ material thin film and convetional $Ge_2Sb_2Te_5$ PRAM thin film. The fabricated new composition $Ge_1Se_1Te_2$ thin film exhibited a successful switching between an amorphous and a crystalline phase by applying a 950 ns -6.2 V set pulse and a 90 ns -8.2 V reset pulse. It is expected that the new composition $Ge_1Se_1Te_2$ material thin film device will be possible to applicable to overcome the Set/Reset problem for the nonvolatile memory device element of PRAM instead of conventional $Ge_2Sb_2Te_5$ device.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.239-247
• /
• 1995

Chalcogenide glasses with compositions of Ge10Se90-xTex(X=0~50 at.%) were prepared in order to investigate the effects of Te substitution on the transmission characteristics of Ge-Se glasses in the 8~12 ${\mu}{\textrm}{m}$ wavelength region. Absorption coefficients were observed to decrease with Te addition, indicating the improved transmission capabilities of Ge-Se-Te glasses as compared to binary Ge-Se glasses. XRD analysis of crystallized glasses suggested the formation of weaker Se-Te and/or Te-Te bonds with addition of Te substituting for Se in stronger Se-Se bonds. Incorporation of Te in excess of 20at% resulted in the formation of hexagonal Te phases when crystallized. It is speculated that the presence of Te-Te bonds with highly metallic bond character resulted in the enhanced crystallization tendencies of glasses. Fromation of Te-rich chains through gradual replacement of Se-Se with Se-Te and/or Te-Te bonds was further supported by decreases in glass transition and crystallization temperatures.