• Transactions on Electrical and Electronic Materials
• /
• 제1권2호
• /
• pp.1-6
• /
• 2000

This article presents the experiments and considerations possible about gate etching in polysilicon when oxygen gas is added in chamber, We propose the novel study with optical emission spectroscopy in polysilicon etching. It is shown that added oxygen gases play an important role in enhencement of density in chlorine gases as a scavenger of silicon from SiCl$\_$x/. And a small amount of Si-O bonds are deposited and then the deposited thin film protect silicon dioxyde against reaction chlorine with silicon in SiO$_2$. Consequently, we can improve the selectivity of polysilicon the silicon dioxide, which is clearly explained in this model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.889-892
• /
• 2009

We have developed a practical printing technology for the gate electrode of organic thin film transistors(OTFTs) by combining screen-printing with wet-etching process using nano-silver ink as a conducting material. The screen-printed and wet-etched Ag electrode exhibited a minimum line width of ~5 um, the thickness of ~65 nm, and a resistivity of ${\sim}10^{-6}{\Omega}{\cdot}cm$, producing good geometrical and electrical characteristics for gate electrode. The OTFTs with the screen-printed and wet-etched Ag electrode produced the saturation mobility of $0.13cm^2$/Vs and current on/off ratio of $1.79{\times}10^6$, being comparable to those of OTFT with the thermally evaporated Al gate electrode.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1485-1488
• /
• 1997

The capacity of memory chip has increased vert quickly and 64MDRAM becomes main product in semiconductor manufacturing lines consists of many sequential processes, including etching process. although it needs direct sensing of wafer state for the accurae detching, it depends on indirect esnsing and sample test because of the complexity of the plasma etching. This equipment receives the inner light of etch chamber through the viewport and convets it to the voltage inetnsity. In this paper, EDP voltage signal has a new role to detect etching failure. First, we gathered data(EPD sigal, etching time and etchrate) and then analyzed the relationships between the signal variatin and the etch rate using two neural network modeling. These methods enable to predict whether ething state is good or not per wafer. For experiments, it is used High Density Inductive coupled Plasma(HDICP) ethcing equipment. Experiments and results proved to be abled to determine the etching state of wafer on-line and analyze the causes by modeling and EPD signal data.

• 한국정보통신학회논문지
• /
• 제13권7호
• /
• pp.1393-1398
• /
• 2009

본 연구는 LCD용 비정질 실리콘박막트랜지스터의 제조공정중 가장 중요한 식각 공정에서 각 박막의 특성에 맞는 습식 및 건식식각공정을 개발하여 소자의 특성을 안정시키고자 한다. 본 연구의 수소화 된 비정질 실리콘 박막 트랜지스터는 Inverted Staggered 형태로 게이트 전극이 하부에 있다. 실험 방법은 게이트전극, 절연층, 전도층, 에치스토퍼 및 포토레지스터층을 연속 증착한다. 스토퍼층을 게이트 전극의 패턴으로 남기고, 그 위에 n+a-Si:H 층 및 NPR(Negative Photo Resister)을 형성시킨다. 상부 게이트 전극과 반대의 패턴으로 NPR층을 패터닝하여 그것을 마스크로 상부 n+a-Si:H 층을 식각하고, 남아있는 NPR층을 제거 한다. 그 위 에 Cr층을 증착한 후 패터닝 하여 소오스-드레인 전극을 위한 Cr층을 형성시켜 박막 트랜지스터를 제조한다. 여기서 각 박막의 패터닝은 식각 공정으로 각단위 박막의 특성에 맞는 건식 및 습식식각 공정이 필요하다. 제조한 박막 트랜지스터에서 가장 흔히 발생되는 문제는 주로 식각 공정시 over 및 under etching 이며, 정확한 식각을 위하여 각 박막에 맞는 식각공정을 개발하여 소자의 최적 특성을 제공하고자한다. 이와 같이 공정에 보다 엄격한 기준의 건식 및 습식식각 공정 그리고 세척 등의 처리공정을 정밀하게 실시하여 소자의 특성을 확실히 개선 할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제13권8호
• /
• pp.651-657
• /
• 2000

The notching effect in etching of undoped amorphous silicon gate had different characteristics and mechanism comparing with reported ones. The undoped amorphous silicon was etched by using HBr gas plasma. First in the region of small line width the potential increased as a result of ions in the exposed surface of oxide and the incident ions between the small line widths were deflected more wide range therefore the depth of notching was shallow and wide. Second in the region of large line width of gate electrons were charged on the top of photoresist and the side of gate a part of ions deflected. The deflected ions were partly charged positive on the side of gate and then these partly charged ions produced potential difference. Therefore ions stored up more at independent line than at dense line and notching became deeper by Br ion bombardments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.497-500
• /
• 1999

This paper reports on the fabrication and characteristics of recessed gate GaN MESFETs fabricated using a photoelectrochemical wet etching method. The unique etching process utilizes photo-resistive mask and KOH based etchant. GaN MESFETs with successfully recessed gate structure was characterized in terms of dc and RF performance. The fabricated GaN MESFET exhibits a current saturation at $V_{DS}$ = 4 V and a pinch-off at $V_{GS}$ =-3V The peak drain current of the device is about 230mA/mm at 300 K and the value is remained almost same for 500K operation. The $f_{T}$ and $f_{max}$ from the device are 6.357Hz and 10.25 GHz, respectively.y.y.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.148-152
• /
• 2001

One set of MMIC library has been developed using gate recess etching by spin processor. It is superior than that of dipping Method in the uniformity and the reproducibility of gate recess. A DC characteristics of p-HEMT have a uniform characteristics in the whole wafer than that of dipping method. The low noise p-HEMT with the $0.6{\mu}m$ and $200{\mu}m$ of gate length and gate width, respectivily, has a uniform characteristics of Idss 130~145 mA, conductances 190~220mS/nm, and threshold voltage -0.7~-1.1V in the drain voltage of 2V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.104-104
• /
• 2009

Critical dimensions has rapidly shrunk to increase the degree of integration and to reduce the power consumption. However, it is accompanied with several problems like direct tunneling through the gate insulator layer and the low conductivity characteristic of poly-silicon. To cover these faults, the study of new materials is urgently needed. Recently, high dielectric materials like $Al_2O_3$, $ZrO_2$ and $HfO_2$ are being studied for equivalent oxide thickness (EOT). However, poly-silicon gate is not compatible with high-k materials for gate-insulator. To integrate high-k gate dielectric materials in nano-scale devices, metal gate electrodes are expected to be used in the future. Currently, metal gate electrode materials like TiN, TaN, and WN are being widely studied for next-generation nano-scale devices. The TaN gate electrode for metal/high-k gate stack is compatible with high-k materials. According to this trend, the study about dry etching technology of the TaN film is needed. In this study, we investigated the etch mechanism of the TaN thin film in an inductively coupled plasma (ICP) system with $O_2/BCl_3/Ar$ gas chemistry. The etch rates and selectivities of TaN thin films were investigated in terms of the gas mixing ratio, the RF power, the DC-bias voltage, and the process pressure. The characteristics of the plasma were estimated using optical emission spectroscopy (OES). The surface reactions after etching were investigated using X-ray photoelectron spectroscopy (XPS) and auger electron spectroscopy (AES).

• 공업화학
• /
• 제20권1호
• /
• pp.99-103
• /
• 2009

반도체 소자의 실리콘 게이트 전극 식각공정은 산화막에 대한 높은 식각 선택비와 정확한 식각형상 제어 등의 공정요구 조건을 충족시키기 위해 고밀도 플라즈마 식각공정을 사용하나 식각 후 notching이 발생되는 문제점을 보이고 있다. 특이하게 도핑 되지 않은 비정질 실리콘을 게이트 전극 물질로 사용한 경우 발생된 notching의 위치가 가장 외곽에 위치한 게이트 전극선의 바깥쪽에서 주로 발생되는 것이 관찰 되었다. 본 연구에서는 $Cl_2/HBr/O_2$의 식각기체 구성으로 notching 발생이 식각변수들에 따라 받는 경향성을 파악하고, 식각장치 내에서 실리콘 기판에 도달하는 식각 이온들의 진행경로를 분석하였다. 주 원인은 플라즈마 내의 식각 활성종 이온들이 대전효과에 의하여 궤적의 왜곡이 일어나 notching 현상이 발생되는 것으로 파악되었다. 이 결과를 바탕으로 도핑 되지 않은 비정질 실리콘 게이트 식각에서 발생하는 notching의 형성기구를 정성적으로 설명하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1273-1276
• /
• 2007

We provide a newly developed dry etching process for the fabrication of ZnO-based oxide TFTs. The etching characteristics of ZnO (active layer) and $Al_2O_3$ (gate insulator) thin films were systematically investigated when the etching gas mixtures and their mixing ratios were varied in the heliconplasma etching system.