• Ocean and Polar Research
• /
• v.38 no.4
• /
• pp.315-324
• /
• 2016

In this study, we investigated changes in the macrobenthic community in Sihwa tidal flat before and after the operation of a Tidal Power Plant (TPP). In order to investigate changes in the macrobenthic community structure, field surveys were conducted at eighteen stations in 4 transect lines every September from 2011 to 2015. Mean density of macrobenthos decreased to $116ind./m^2$ in 2015 from $1,602ind./m^2$ in 2011. While the mean density of macrobenthos has decreased, species richness and biomass have gradually increased. The species diversity and SEP (Shannon-wiener Evenness Proportion) have also gradually increased over time since the operation of the TPP. The macrobenthic community in Sihwa tidal flat was divided into 4 groups on a yearly base. Before the operation of TPP, opportunistic species such as Neanthes succina and Polydora cornuta largely contributed to the structure of the macrobenthic community, while equilibrium species such as Periserrula leucophryna and Scopimera globosa contributed after the operation. With the operation of TPP, the macrobenthic community has rapidly recovered and this might be related to improvement in the quality of water and sedimentary environments as a result of an increase in water mass volume exchanged through the TPP gate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.364-370
• /
• 2011

The Hilbert transform performs a role to transform band pass signals into low pass signals in wireless communication systems. The operation of Hilbert transform is based on a convolution process which is required adding and multiplying calculations. When the Hilbert transform is designed and hardware-implemented at gate level, the adding and multiplying operation requires a high power consumption and a occupation of wide area on a chip. So the results of adding and multiplying operation cause to degrade the performance of implemented system. In this paper, the new Hilbert transformer is proposed, which has a low hardware complexity by application of MAG(Minimum Adder Graph) algorithm. The proposed Hilbert transformer was simulated in ISE environment of Xilinx and showed the reduction of hardware complexity comparing with the number of gate in the conventional Hilbert transformer.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.1-11
• /
• 2013

This research proposed integrated expressway traffic management strategy using ramp metering and toll mainline metering. This research suggested a traffic signal optimization model for integrated operation of ramp and mainline metering based on Demand-Capacity Model that is used to optimize allowable input volume for ramp metering in FREQ model. The objective function of this model is sectional throughput volume maximization, and this model can calculate optimal signal timings for mainline metering and ramp metering. This study conducted an effectiveness analysis of integrated metering strategy using PARAMICS and its API. It targeted Seoul's Outer Ring Expressway between Gimpo and Siheung toll gate. As a simulation result, integrated operation of mainline and ramp metering provided more smooth traffic flow, and throughput volume of mainline increased to 14% in congested section. In addition, a queue of 400 meter was formed at metering point of toll gate. This research checked that integrated traffic management strategy facilitates more efficient traffic operation of mainline and ramp from diffused traffic congestion.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.57-60
• /
• 2002

Developed power off automatic stanch that keep floodgate upper stream water level changelessly for curtailment of operation by manpower and electricity lead-in equal early investment expense that manual system floodgate and electric motion floodgate have. Human strength does not need in floodgate operation as that power off automatic floodgate open and close floodgate automatically by buoyancy and also, another thing power does not need. Before establish floodgate, effect that get to waterway when behaves repair calculation of correct waterway and decide size of floodgate accordingly and establish floodgate must do examination analysis fussily. power off automatic floodgate night soil that get between countermeasure is the urgentest low-down in reply because can do mistake in operation by phenomenon and so on about water resources by different plate shape change through a model experiment examine closely need to.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.1-6
• /
• 2005

Eumsung TM/TC system is composed of one control center, four reservoirs and twenty irrigation canal systems. In this paper we analyzed operation frequencies of the irrigation system to verify the effect of TM/TC system. Large facilities's operation frequency were more low then small thing and irrigation type was continuous irrigation. operation frequency was most high in may and june. usually water gate was operated once per 5-10 day. With these analysis we concluded that operators should operate irrigation facilities based on scientific technique and designer should make a proper choice in TM/TC system selection fit to the field.

• Structural Monitoring and Maintenance
• /
• v.6 no.1
• /
• pp.1-17
• /
• 2019

Preserving reservoir safety has recognized to be important for the public where a vast majority of dams are located upstream of greatly populated cities and industrialized areas. Buckling, floatation and cavitation have caused failure in the spillway gates and conveyance features during past catastrophic events; showed their vulnerability and need for regular inspection along with reviewing design calculations to ensure the spillway meet current design standards. This paper investigates the hydraulic and structural consideration of dam's spillway by evaluating the data of Karkheh Dam's. Discharge capacity, flood routings and cavitation damage risk were main features for hydraulic considerations where hydrostatic and hydrodynamic forces and stability conditions were considered in structural considerations.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.11
• /
• pp.1-10
• /
• 1993

This paper proposes a High Performance Full-Swing BiCMOS (HiF-BiCMOS) circuit which improves on the conventional BiCMOS circuit. The HiF-BiCMOS circuit has all the merits of the conventional BiCMOS circuit and can realize full-swing logic operation. Especially, the speed of full-swing logic operation is much faster than that of conventional full-swing BiCMOS circuit. And the number of transistors added in the HiF-BiCMOS for full-swing logic operation is constant regardless of the number of logic gate inputs. The HiF-BiCMOS circui has high stability to variation of environment factors such as temperature. Also, it has a preamorphized Si layer was changed into the perfect crystal Si after the RTA. Remarkable scalability for power supply voltage according to the development of VLSI technology. The power dissipation of HiF-BiCMOS is very small and hardly increases about a large fanout. Though the Spice simulation, the validity of the proposed circuit design is proved.

• Journal of Sensor Science and Technology
• /
• v.23 no.5
• /
• pp.332-336
• /
• 2014

In this paper, we propose a complementary metal oxide semiconductor (CMOS) binary image sensor with a gate/body-tied (GBT) PMOSFET-type photodetector for high-speed operation. The GBT photodetector of an active pixel sensor (APS) consists of a floating gate ($n^+$-polysilicon) tied to the body (n-well) of the PMOSFET. The p-n junction photodiode that is used in a conventional APS has a good dynamic range but low photosensitivity. On the other hand, a high-gain GBT photodetector has a high level of photosensitivity but a narrow dynamic range. In addition, the pixel size of the GBT photodetector APS is less than that of the conventional photodiode APS because of its use of a PMOSFET-type photodetector, enabling increased image resolution. A CMOS binary image sensor can be designed with simple circuits, as a complex analog to digital converter (ADC) is not required for binary processing. Because of this feature, the binary image sensor has low power consumption and high speed, with the ability to switch back and forth between a binary mode and an analog mode. The proposed CMOS binary image sensor was simulated and designed using a standard CMOS $0.18{\mu}m$ process.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.6-11
• /
• 2015

The ESD(electrostatic discharge) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different GPNS(Gate to Primary $N^+$ Diffusion Space) structure was discussed for high voltage I/O applications. A conventional NSCR_PPS standard device with FPW(Full P-Well) structure and non-CPS(Counter Pocket Source) implant shows typical SCR-like characteristics with low on-resistance(Ron), low snapback holding voltage(Vh) and low thermal breakdown voltage(Vtb), which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified PPW(Partial P-Well) structure and optimal CPS implant demonstrate the improved ESD protection performance as a function of GPNS variation. GPNS was a important parameter, which is satisfied design window of ESD protection device.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.253-258
• /
• 2006

We have fabricated vortical type organic thin film transistors (OTFTs) consisting of ITO/n type active material/Al gate/n type active material/Al using F16CuPc, NTCDA, PTCDA and PTCDI C-8. The effect of mobility of n type active materials and thin film thickness on current-voltage (I-V) characteristics and on/off ratios were investigated. The vortical type organic transistor using PTCDI C-8 exhibited low operation voltage and high on-off ratio. In addition, we have investigated the feasibility of application in organic light emitting transistor using light emitting polymer. Especially, the light emitting transistor consisting of ITO/PEDOT-PSS/P3HT/F16CuPc/Al gate/F16CuPc/Al showed the maximum quantum efficiency of 0.054.