• 센서학회지
• /
• 제32권1호
• /
• pp.1-9
• /
• 2023

Recently, the digital healthcare technologies including non-invasive diagnostics based on Internet of Things (IOT) are getting attention. Human exhaled breath contains a variety of volatile organic compounds (VOCs), which can provide information of malfunctions of the body and presence of a specific disease. Detection of VOCs in exhaled breath using gas sensors are easy to use, safe, and cost-effective. However, accurate diagnosis of diseases is challenging because changes in concentration of VOCs are extremely small and lots of body factors directly or indirectly influence to the conditions. To overcome the limitations, highly selective nanosensors and artificial intelligent electronic nose (E-nose) systems have been mainly researched in recent decades. This review provides brief reviews of the recent studies for diabetes and lung cancer diagnosis using nanosensors and E-nose systems.

• 대한안전경영과학회지
• /
• 제11권3호
• /
• pp.73-78
• /
• 2009

In this paper, we developed the care system for older people living alone using the RFID technologies and the living informations. The care system store living informations, extracted through a unconstrained detection method by the RFID tags and readers, into a monitering server. The unconstrained detection method improved a weakness of existing systems that detected a living informations through an infrared sensor, ultrasonic sensor, camera, consumed quantity of the tap water or gas. The result of this study will playa very important role, as a part of a composite older-welfare services. Also, in the future, accumulated living informations will be allowed for a health data of older peoples.

• 한국표면공학회지
• /
• 제54권5호
• /
• pp.260-266
• /
• 2021

Synthesizing low-dimensional structures of oxide semiconductors is a promising approach to fabricate highly efficient gas sensors by means of possible enhancement in surface-to-volume ratios of their sensing materials. In this work, vertically aligned zinc oxide (ZnO) nanorods are successfully synthesized on a transparent glass substrate via seed-mediated hydrothermal synthesis method with the use of a ZnO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Zn metal film. Structural and optical characterization by x-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy reveals the successful preparation of the ZnO nanorods array of the single hexagonal wurtzite crystalline phase. From gas sensing measurements for the nitrogen dioxide (NO₂) gas, the vertically aligned ZnO nanorod array is observed to have a highly responsive sensitivity to NO₂ gas at relatively low concentrations and operating temperatures, especially showing a high maximum sensitivity to NO₂ at 250 ℃ and a low NO₂ detection limit of 5 ppm in dry air. These results along with a facile fabrication process demonstrate that the ZnO nanorods synthesized on a transparent glass substrate are very promising for low-cost and high-performance NO₂ gas sensors.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.219-226
• /
• 2023

Utilizing low-dimensional structures of oxide semiconductors is a promising approach to fabricate relevant gas sensors by means of potential enhancement in surface-to-volume ratios of their sensing materials. In this work, vertically aligned cupric oxide (CuO) nanorods are successfully synthesized on a transparent glass substrate via seed-mediated hydrothermal synthesis method with the use of a CuO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Cu metal film. Structural and optical characterization by x-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy reveals the successful preparation of the CuO nanorods array of the single monoclinic tenorite crystalline phase. From gas sensing measurements for the nitrogen monoxide (NO) gas, the vertically aligned CuO nanorod array is observed to have a highly responsive sensitivity to NO gas at relatively low concentrations and operating temperatures, especially showing a high maximum sensitivity to NO at 200 ℃ and a low NO detection limit of 2 ppm in dry air. These results along with a facile fabrication process demonstrate that the CuO nanorods synthesized on a transparent glass substrate are very promising for low-cost and high-performance NO gas sensors.

• 한국가스학회지
• /
• 제15권4호
• /
• pp.27-32
• /
• 2011

가스 설비의 증가와 함께 가스 사용시 안전관리가 중요해 지고 있다. 그 일환으로 국가적인 차원에서 U-safety 시스템 도입이 추진되고 있으며, 이를 위해서는 실시간으로 현장에서 가스 누출에 대한 검지가 가능해야 한다. 탄화수소류로 주로 구성된 가스의 누출 감지는 열저항을 이용하는 방식이지만, 도관에 함께 매설될 시에는 폭발 가능성으로 인해 적용이 불가하다. 이에 상온에서 메탄이나 일산화탄소와 같은 탄화수소류를 전기화학적 촉매 반응으로 검지할 수 있는 방법이 필요하다. 본 연구에서는 다공성 골드 분말을 팰렛 형태로 제조하여 백금 나노입자를 전해 도금법으로 도핑하여, CO의 $CO_2$ 산화 반응을 유도할 수 있는 촉매 전극을 제조하였다. Pt/PAu 전극의 경우, 약 21%의 CO 전환률을 보여서 탄화수소류의 상온 촉매전환과 함께 전기화학적 센싱이 가능함을 보였다. 이는 추후 메탄 가스 검지에 적용할 수 있는 여지를 마련했다고 판단된다.

• 한국재료학회지
• /
• 제24권3호
• /
• pp.152-158
• /
• 2014

We report the effect of the fabric of the surface microstructure on the CO gas sensing properties of $SnO_2$ thin films deposited on self-assembled Au nanodots ($SnO_2$/Au) that were formed on $SiO_2/Si$ substrates. We characterized structural and morphological properties, comparing them to those of $SnO_2$ thin films deposited directly onto $SiO_2/Si$ substrates. We observed a significant enhancement of CO gas sensing properties in the $SnO_2$/Au gas sensors, specifically exhibiting a high maximum response at $200^{\circ}C$ and quite a low detection limit of 1 ppm level in dry air. In particular, the response of the $SnO_2/Au$ gas sensor was found to reach the maximum value of 32.5 at $200^{\circ}C$, which is roughly 27 times higher than the response (~1.2) of the $SnO_2$ gas sensor obtained at the same operating temperature of $200^{\circ}C$. Furthermore, the $SnO_2/Au$ gas sensors displayed very fast response and recovery behaviors. The observed enhancement in the CO gas sensing properties of the $SnO_2/Au$ sensors is mainly ascribed to the formation of a nanostructured morphology in the active $SnO_2$ layer having a high specific surface-reaction area by the insertion of a nanodot form of Au nucleation layer.

• 센서학회지
• /
• 제23권3호
• /
• pp.207-210
• /
• 2014

$TiO_2$ oxide semiconductor is being widely studied in various applications such as photocatalyst and photosensor. Pd/$TiO_2$ gas sensor is mainly used to detect $H_2$, CO and ethanol. This study focus on increasing hydrogen detection ability of Pd/$TiO_2$ in room temperature through Al-doping. Pd/$TiO_2$ was fabricated by the hydrothermal method. Contacting to Aluminum (Al) foil led to Al doping effect in Pd/$TiO_2$ by thermal diffusion and enhanced hydrogen sensing response. $TiO_2$ nanoparticles were sized at ~30 nm of diameter from scanning electron microscope (SEM) and maintained anatase crystal structure after Al doping from X-ray diffraction analysis. Presence of Al in $TiO_2$ was confirmed by X-ray photoelectron spectroscopy at 73 eV. SEM-energy dispersive spectroscopy measurement also confirmed 2 wt% Al in Pd/$TiO_2$ bulk. The gas sensing test was performed with $O_2$, $N_2$ and $H_2$ gas ambient. Pd/Al-doped $TiO_2$ did not response $O_2$ and $N_2$ gas in vacuum except $H_2$. Finally, the normalized resistance ratio ($R_{H2on}/R_{H2off}$) of Pd/Al-doped $TiO_2$ increases about 80% compared to Pd/$TiO_2$.

• 센서학회지
• /
• 제29권2호
• /
• pp.93-99
• /
• 2020

A colorimetric paper sensor was used to detect volatile nitrogen-containing compounds emitted from spoiled salmon filets to determine their freshness. The sensing mechanism was based on acid-base reactions between acidic pH-indicating dyes and basic volatile ammonia and amines. A sensing layer was simply fabricated by drop-casting a dye solution of bromocresol green (BCG) on a polyvinylidene fluoride substrate, and its color-change response was enhanced by optimizing the amounts of additive chemicals, such as polyethylene glycol, p-toluene sulfonic acid, and graphene oxide in the dye solution. To avoid the adverse effects of water vapor, both faces of the sensing layer were enclosed by using a polyethylene terephthalate film and a gas-permeable microporous polytetrafluoroethylene sheet, respectively. When exposed to basic gas analytes, the paper-like sensor distinctly exhibited a color change from initially yellow, then to green, and finally to blue due to the deprotonation of BCG via the Brønsted acid-base reaction. The use of ammonia analyte as a test gas confirmed that the sensing performance of the optimized sensor was reversible and excellent (detection time of < 15 min, sensitive naked-eye detection at 0.25 ppm, good selectivity to common volatile organic gases, and good stability against thermal stress). Finally, the coloration intensity of the sensor was quantified as a function of the storage time of the salmon filet at 28℃ to evaluate its usefulness in monitoring of the food freshness with the measurement of the total viable count (TVC) of microorganisms in the food. The TVC value increased from 3.2 × 10⁵ to 3.1 × 10⁹ cfu/g in 28 h and then became stable, whereas the sensor response abruptly changed in the first 8 h and slightly increased thereafter. This result suggests that the colorimetric response could be used as an indicator for evaluating the degree of decay of salmon induced by microorganisms.

• 센서학회지
• /
• 제20권1호
• /
• pp.53-57
• /
• 2011

We developed a small methane detection system because methane gas is used in many areas and is dangerous. The developed system consisted of LD(Laser Diode) tuned a wavelength of $1.65\;{\mu}m$, two mirrors to collect a laser beam, photo detector. It could detect methane gas at a long range and its sensitivity was 1.98 V/$CH_4%$.

• 공업화학
• /
• 제33권6호
• /
• pp.630-635
• /
• 2022

멜라민 스펀지를 열처리하여 제조된 질소함유 탄소 스펀지에 산화구리(CuO)를 무전해 도금하여 기판없이 작동하는 일산화질소(NO) 가스 센서를 제조하였다. 탄소 스펀지 표면의 CuO 함량은 도금 시간이 증가함에 따라 증가하였으나, NO 가스 흡착을 유도한다고 알려져 있는 질소의 함량은 CuO 표면 함량이 증가함에 따라 감소하였다. 미처리 탄소스펀지는 NO 가스에 대하여 18 min에 최대 저항 변화(5.0%)를 나타내었다. 반면에, CuO가 도금된 샘플(CuO30s-CS)은 8 min만에 최대 18.3%의 저항변화를 보였다. 이러한 NO 가스 감지 능력 향상은 CuO로 인하여 탄소 스펀지의 정공 캐리어 수 증가 및 전자전달 촉진에 기인하는 것으로 판단된다. 그러나, 60 s 동안 CuO 무전해 도금된 탄소 스펀지의 NO가스 감지 저항은 1.9%로 오히려 감소하였다. 이는 탄소 스펀지 표면에 CuO로 완전히 도금되어 NO 가스 흡착 능력이 떨어져 저항변화가 감소한 것으로 판단된다. 따라서, CuO가 도금된 탄소 스펀지는 빠르고 우수한 저항변화 특성을 가지고 있어 유용한 NO 가스 센서로 사용할 수 있으나, CuO가 탄소 스펀지 표면을 완전히 도금해서는 안 된다.