The shrinking generator is simple and stateable, and known that has good security properties. The bits of one output( $R_1$) are used to determine whether the corresponding bits of the second output will be used as part of the overall keystream. Two LFSRs consisting the generator generate pseudorandom sequences satisfying Golomb's postulates. We used this property to analyze the stream of LFSR $R_1$ of the generator.
본 연구는 안면부 신경병증 통증 모델에서 간극결합을 분리하는 Carbenoxolone(CBX)과 P2X 수용체의 길항제(iso-PPADS)의 진통작용을 확인하고자 수행되었다. 실험동물은 Sprague-Dawley계 수컷 흰쥐(240~280g)를 사용하였으며, 안면부 신경병증 통증을 유발하기 위해 흰쥐의 하악 왼쪽 두 번째 어금니를 발거하고, 아랫 이틀신경의 손상을 유도하기 위해 소형 치과용 임플란트를 식립하였다. CBX를 복강으로 하루 2번 투여 했을 때, 25ug/kg에서 유의한 진통반응이 나타났다(p<0.05). iso-PPADS 역시 복강으로 하루 2번 투여 했을 때, 25ug/kg에서 유의한 진통반응이 나타났다(p<0.05). 두 약물의 각각의 효과가 나타나지 않은 저 농도에서 함께 투여하였을 때, CBX 1ug/kg, iso-PPADS 2.5ug/kg를 투여 시 유의한 진통 효과가 나타났다(p<0.05). 저 농도의 CBX를 이용한 간극결합의 차단과 저 농도의 P2X 수용체의 길항제를 함께 투여 시 구강 안면신경병증통증기전에서 통증을 억제하는 효과를 확인할 수 있었다. 이러한 결과를 통하여 CBX를 이용한 간극결합의 차단과 P2X 수용체의 길항제의 투여가 안면부 통증조절에 중요한 역할을 담당할 것으로 사료된다.
플래시 메모리 기반의 저장 장치는 고성능, 저전력, 내구성과 경량 등의 특징을 가지고 있어 기존에 사용되고 있던 저장장치를 빠르게 대체하고 있다. 플래시 메모리 기반의 저장 장치는 기존 저장장치인 블록 저장 장치로 가상화하기 위한 계층인 FTL (Flash Translation Layer) 을 가지고 있다. 가비지 컬렉션(Garbage Collection)은 FTL의 주요한 기능으로서 플래시 메모리의 수명과 성능에 큰 영향을 끼친다. 플래시 메모리의 수명은 가비지 컬렉션에 의해 발생되는 지우기의 횟수와 마모도의 영향을 받는다. 본 논문에서는 마모도 평준화 개선을 위해 File 정보를 알 수 있는 환경에서 File Clustering 알고리즘을 제시한다. File Clustering은 같은 File에서의 요청이 또다시 같이 호출 될 것을 기대하여 같은 File로부터 온 요청을 같은 블록에 할당하는 알고리즘이다. 이를 위해 FTL의 기능 중 페이지 할당 정책을 제안하였고, 최소한의 마모도 평준화를 보장하기 위해 MIN-MAX GAP을 사용하였다. 본 논문에서 제안하는 알고리즘을 검증하기 위해 TPC 벤치마크를 이용하였고 이를 통해 마모도 평준화 하지 않은 분산보다 690%이상 값이 개선되었고, 기존에 연구되던 Hot/Cold보다도 좋은 분산을 갖는 것을 보였다.
본 논문에서는 인쇄체 텍스트 영상에 대한 문자열 분리 방법과 어절 분리 방법을 제안한다. 문자열 분리 방법은 수평 투영 프로파일을 분석하고, 오분리된 문자열에 대하여 재귀적 투영 프로파일 (Recursive Projection Profile) 분석을 수행한다. 어절 단위 분리는 문자열에 대한 연결요소 분석을 통하여 gap을 검출한 후, 계층적 군집화 기법에 의해 어절과 어절 사이에 존재하는 gap을 판별하여 어절 분리점을 결정한다. 또한 어절과 어절 사이에 존재하는 특수기호를 검출하여 어절 분리점을 추가하기 위해서, 연결요소의 종횡비와 골격선(skeleton)의 형태적 특징을 고려한다. 제안 방법의 성능 평가를 위하여 총 84 개의 텍스트 영상에 대하여 실험하였고, 국내 상용 OCR 소프트웨어인 아르미와 성능 비교하였다. 최종 어절 분리에 대하여 제안 방법과 아르미가 각각 99.92%와 97.58%의 성능으로 측정됨으로써 제안 방법이 아르미에 비해 우수함을 보였다.
Purpose Recently, much attention in building smart factory has dramatically increased with an emergence of the Industry 4.0. As we noted a connectivity gap between main concerns of MIS and the automated manufacturing systems such as POP and MES, it is recommended that CPS (Cyber-Physical System) can be an important building block for the smart factory and enrich the depth of MIS knowledge. Therefore, first, this study attempted to identify the connectivity gap between the traditional field of MIS (ERP, SCM, CRM, etc.) and the automated manufacturing systems, and then recommended CPS as a technical bridge to fill the gap. Secondly, we studied concepts and research trend of CPS that is believed to be a virtual mechanism to manage manufacturing systems in an integrated manner. Finally, we suggested research and educational opportunities in MIS based on the CPS perspectives. Design/methodology/approach Since this paper introduced relatively new idea of CPS originally discussed in the field of engineering, traditional MIS research method such as survey and experiment may not fit well. Therefore this research collected technical cases through literature survey in engineering fields, video clips from Youtube, and field references from various ICT Exhibitions and Conventions. Then we analyzed and reorganized them to highlight the necessity of CPS and draw some insight to share with MIS academia. Findings This paper introduced CPS to bridge the connectivity gap between the traditional MIS and automated manufacturing system (smart factory), a concern far away from the MIS academia. Further, this paper suggested future research subjects of MIS such as developing software to share big production data and systems to support manufacturing decisions, and innovating MIS curricula including smart and intelligent manufacturing technology within the context of traditional enterprise systems.
세포내 유리칼슘(free calcium, $Ca^{2+}$)은 세균에서 고등동물에 이르기까지 거의 모든 세포에서 세포 고유작용을 조절하는 중요한 세포내 신호전달체계(signal transduction system)의 매개체이다. 타액선 세포에서 부교감 신경 자극으로 타액분비가 증가될 때에도 세포내 $Ca^{2+}$ 농도 증가가 가장 중요한 역할을 한다. 그러나 췌장(pancreas)의 경우 세포내 $Ca^{2+}$ 이외에도 인접세포를 전기적 화학적으로 연결해주는 gap junction이 외분비 기능을 직접적으로 조절할 가능설이 제시되었다. 타액선 세포에서도 세포막에 고농도의 gap junction이 존재하고 있으며 gap junction을 통해 인접세포들이 전기적, 화학적으로 연계되어 있어 gap junction이 타액선 세포의 기능을 직접적으로 조절할 가능성을 내포하고 있다. 따라서 gap junction이 타액선의 타액분비 작용에도 중요한 역할을 하며 이러한 작용이 세포내 $Ca^{2+}$ 농도를 조절하여 이루어질 것이라는 가정하에 이를 확인하는 실험을 시행하였다. 흰쥐 악하선에서 유리되는 타액양을 측정하기 위해서 악하선으로 혈액을 공급하는 동맥에 가는 관을 삽입하여 생리 식염수를 관류하면서 타액선관을 통해 타액을 채취하였다. 세포내 $Ca^{2+}$ 농도는 분리한 악하선 acini 내에 $Ca^{2+}$ 농도 변화에 민감하게 반응하는 형광물질인 fura-2를 축적시키고 형광 분석기를 사용하여 형광강도를 측정하여 다음과 같은 결과를 얻었다. 1. CCh 투여로 타액 분비가 증가하였을 때 gap junction을 봉쇄하는 약물인 octanol(1 mM)을 투여하면 타액분비가 봉쇄되었으며 이는 가역적 반응이었다. 2. CCh투여로 세포내 $Ca^{2+}$ 농도가 증가하였을 때 1mM octanol을 투여하면 세포내 $Ca^{2+}$ 농도가 CCh 투여전의 상태로 감소되었다. 3. Octanol은 CCh에 의하여 유발된 초기 $Ca^{2+}$ 증가를 억제하지는 못한 반면에 후기 $Ca^{2+}$ 농도를 감소시켰다. 4. 세포막 $Ca^{2+}$ 통로를 열어주는 약물인 thapsigargin($1{\mu}M$)을 투여하여 세포내 $Ca^{2+}$ 농도를 증가시킨 후 1mM octanol을 투여하면 세포내 $Ca^{2+}$ 농도가 thapsigargin 투여 전의 상태로 감소하였다. 5. 2,5-di-tert-butyl-1,4-benzohydroquinone(TBQ)의 투여로 세포막을 통한 $Ca^{2+}$ 농도의 주기적 변동인 $Ca^{2+}$의 oscillation이 유발되었는데, 이때 1mM octanol을 투여한 경우에 $Ca^{2+}$농도의 oscillation이 정지하여 역시 gap junction을 봉쇄하면 TBQ에 의해서 유발된 세포내 $Ca^{2+}$ 농도의 주기적 변동이 사라지고 $Ca^{2+}$ 농도의 감소가 나타남을 확인하였다. 6. Gap junction을 봉쇄하는 또 다른 약물인 glycyrrhetinic acid($100{\mu}M$)도 CCh 자극으로 인한 타액분비를 억제하였다. 이상의 결과로 미루어 gap junction은 흰쥐 악하선 세포로부터의 타액분비 조절에 중요한 역할을 하는데, 이는 gap junction이 세포막 $Ca^{2+}$ 통로를 조절함으로써 수용체 자극으로 유발된 세포내 $Ca^{2+}$ 농도 변화에 영향을 미친 결과인 것으로 추측된다.
Spot welding which use the main process for side block production of stainless steel railway vehicle is legged behind in laser welding about a quality and productivity. Although the laser welding has many potential advantages such as low heat input and aspect ratio of weld bead, its application to a new structural component still is required many engineering data including mechanical properties such as tensile, fatigue strength, etc on. Therefore, experimental analysis was carried out to understand the fatigue phenomena of different thickness stainless steel overlap joining panels by Nd:YAG laser welding. The fatigue life curves were obtained through fatigue tests with the various levels of applied load. The fatigue life is related with the parameters such as gap size and penetration depth through experiment. As the results, tensile strength and fatigue life were proportional in heat input level and gap was identified the major factor for fatigue life. Also we could know that deferent a-ferrite content at HAZ depend on welding heat input was important factor to determine a formation of initial crack and total fatigue life cycle.
This study was performed on the dose distribution of various field size and the effect of penumbra shield in the telecobalt unit. The results obtained are as follows. 1. Errors of the light and ${\gamma}-ray$ field size was below the regulation as 0.52 percentage. 2. The coefficient of field area was increased with the larger field area, and this coefficient was showed the more difference in larger SSD. 3. The rectangular field areas, which were described by level of the same percentage depth does, were decreased with the more elongation factor. At the same elongation factor, the compensating factor was decreased with the larger field size. 4. The lead block or extension collimator was able to shield r-ray exposure of outside field size from 50 to 80 percentage. 5. On the matching adjacent fields, while the gap between beam edges are contacted, that overlapped beam edges indicated up to 140 percentage, and while the gap was 1 cm, it could be reduced to 90 Percentage. The lead-libocking on the overlapped area was more effective to lower dose, as 80 percentage in this case. 6. Percentage depth dose of various trimming field sizes were increased linearlly according to area 1 perimeter size, but the center split field size did not maintain linearlly.
A 74-year-old female patient, who underwent surgery for a left distal tibiofibular fracture 40 years earlier, visited the hospital with an ankle varus deformity due to malunion. The patient complained of discomfort while walking due to the ankle and hindfoot varus deformity but did not complain of ankle pain. Therefore, correction using supramalleolar osteotomy was planned, and through virtual surgical simulation, it was predicted that a correction angle of 24° and an osteotomy gap open of 12 mm would be necessary. An osteotomy guide and an osteotomy gap block were made using three-dimensional (3D) printing to perform the osteotomy and correct the deformity according to the predicted goal. One year after surgery, it was observed that the ankle varus was corrected according to the surgical simulation, and the patient was able to walk comfortably. Thus, for correction of deformity, virtual surgical simulation and a 3D-printed osteotomy guide can be used to predict the target value for correction. This is useful for increasing the accuracy of correction of the deformity.
An ElectroMagnetic Actuator (EMA) is designed and assessed numerically and experimentally. The EMA has the advantage to be without contact with the structure so it could be applied to light and small mechanism. Nevertheless, the open-loop instability and the nonlinear dynamic behavior with respect to the excitation frequency could limit its application field. The EMA is designed and dimensioned as a function of the experimental structure to be controlled. An inverse model of the EMA is proposed in order to implement a linear action block for the used frequency range. The control strategy is a fuzzy controller with displacements and velocities as inputs. A fuzzy controller of Takagi-Sugeno type is used. The air gap is estimated by using a modal approximation of the displacements issued from all measurements. Several configurations of control are assessed by using numerical simulations. The block diagram used for numerical simulations is implemented under Dspace$^{(R)}$ environment. The implemented controller was tested experimentally in the context of impact perturbations. The results obtained show the effectiveness of the developed procedures and the robustness of the implemented control.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.