• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.37-44
• /
• 2008

This paper presented a solution to encryption and decryption problem suffering data transmission error for encrypted message transmission. Block cypher algorithms experience avalanche effect that a single bit error in an encrypted message brings substantial error bits after decryption. The proposed fault tolerant scheme addresses this error avalanche effect exploiting a multi-dimensional data array shuffling process and an error correction code. The shuffling process is to simplify the error correction. The shuffling disperses error bits to many data arrays so that each n-bit data block may comprises only one error bit. Thereby, the error correction scheme can easily restore the one bit error in an n-bit data block. This scheme can be extended on larger data blocks.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.381-382
• /
• 2002

The Fluid film between the valve plate and the cylinder block was measured by use of a gap sensor and the mercury-cell slip ring unit under real working conditions. During the operating periods, experiments with discharge pressure, revolution speed, and valve geometry was carried out for the fluid film on the valve plate. To investigate the effect of the valve shape, we designed two valve plates each having a different shape; the first valve plate was a plane valve plate. while the second valve plate was a spherical valve plate. It was noted that these two valve plates observed different aspects of the fluid film characteristics between the cylinder block and the valve plate. The leakage flow rate and the shan torque were also investigated in order to clarify the difference between these two types of valve plates. From the results of this study. we found that the spherical valve plate estimated good fluid film patterns and performance more than the other valve plate in oil hydraulic axial piston pumps.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.655-663
• /
• 2005

Tribological characteristics in the sliding parts of oil hydraulic piston pumps are very important in increasing overall efficiency. In this study, the fluid film between the valve plate and the cylinder block was measured by using a gap sensor and the mercury-cell slip ring unit under real working conditions. To investigate the effect of the valve shape, we designed three valve plates each having a different shape. One of the valve plates was without bearing pad, another valve plate had bearing pad and the last valve plate was a spherical valve plate. It was noted that these three valve plates observed different aspects of the fluid film characteristics between the cylinder block and the valve plate. The leakage flow rates and the shaft torque were also investigated in order to clarify the performance difference between these three types of valve plates. From the results of this study, we found that the spherical valve plate estimated good fluid film patterns and good performance more than the other valve plates in oil hydraulic axial piston pumps.

• Health Policy and Management
• /
• v.18 no.3
• /
• pp.128-146
• /
• 2008

Nonlinear pricing abounds in practice because it is a potentially powerful pricing method to explore consumer surplus. The various forms of nonlinear pricing are feasible within a given industry. In this context, it is important for manufacturers and retailers to understand which nonlinear pricing scheme is appropriate to apply in their specific situation and which nonlinear pricing schedule is the most profitable in their market situation. Although the merits of nonlinear pricing are well documented, the attempt to apply nonlinear pricing in medical service has been relatively rare. The researcher aims to try to full this gap by applying a practice-oriented simulation model to health examination data. We compare the sales volumes among nonlinear pricing scheme such as n-block tariff, two-part tariff, and uniform pricing. We found that n-block tariff outperforms two-part tariff and uniform pricing.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.2
• /
• pp.8-14
• /
• 2004

Abstract: In the oil hydraulic piston pumps the clearance between the valve plate and cylinder block plays an important role for volumetric and overall efficiency. Thus, adequate lubricational fluid film is needed for the interface. In this study, fluid film thickness is measured by a gap sensor and a slip ring under operational conditions to observe the behavior of the lubrication mechanism in detail. To investigate the effect according to the valve plate types in view of the fluid film, three different types were designed. Leakage flow rate and shaft torque were also measured to clarify the effect according to the valve plate types. A broad range of experiments were conducted to provide reasonable data on the effect of fluid film. In this experiments two main parameters were found, of which the one is the discharge pressure and the other is valve plate geometry. As a result, we found that the spherical valve plate could get more stable fluid film thickness, maintain good efficiency for high pressure range than the other types.

• Journal of Surface Science and Engineering
• /
• v.42 no.1
• /
• pp.41-46
• /
• 2009

The fit between dental implant fixture and zirconia abutment is affected by many variables during the fabrication process by CAD/CAM program and milling working. The purpose of this study was to evaluate the surface compatibility and electrochemical behaviors of zirconia abutment for prosthodontics. Zirconia abutments were prepared and fabricated using zirconia block and milling machine. For stabilization of zirconia abutments, sintering was carried out at $1500^{\circ}F$ for 7 hrs. The specimens were cut and polished for gap observation. The gap between dental implant fixture and zirconia abutment was observed using field-emission scanning electron microscopy (FE-SEM). The hardness and corrosion resistance of zirconia abutments were observed with vickers hardness tester and potentiostat. The gap between dental implant fixture and zirconia abutment was $5{\sim}12{\mu}m$ for small gap, and $40{\sim}60{\mu}m$ for large gap. The hardness of zirconia surface was 1275.5 Hv and showed micro-machined scratch on the surface. The corrosion potentials of zirconia abutment/fixture was .290 mV and metal abutment/fixture was .280 mV, whereas $|E_{pit}-E_{corr}|$ of zirconia abutment/fixture (172 mV) was higher than that of metal abutment/fixture (150 mV). The corrosion morphology of metal abutment/fixture showed the many pit on the surface in compared with zirconia abutment/fixture.

• Development and Reproduction
• /
• v.17 no.1
• /
• pp.63-72
• /
• 2013

A specific inhibitor of RNA polymerase II, ${\alpha}$-amanitin is broadly used to block transcriptional activities in cells. Previous studies showed that ${\alpha}$-amanitin affects in vitro maturation of cumulus-oocyte-complex (COC). In this study, we evaluated the target of ${\alpha}$-amanitin, and whether it affects oocytes or cumulus cells (CCs), or both. We treated ${\alpha}$-amanitin with different time period during in vitro culture of denuded oocytes (DOs) or COCs in comparison, and observed the changes in morphology and maturation status. Although DOs did not show any change in morphology and maturation rates with ${\alpha}$-amanitin treatment, oocytes from COCs were arrested at metaphase I (MI) stage and CCs were more scattered than control groups. To discover causes of meiotic arrest and scattering of CCs, we focused on changes of cumulus expansion, gap junctions, and cellular metabolism which to be the important factors for the successful in vitro maturation of COCs. Expression of genes for cumulus expansion markers (Ptx3, Has2, and Tnfaip6) and gap junctional proteins (Gja1, Gja4, and Gjc1) decreased in ${\alpha}$-amanitin-treated CCs. However, these changes were not observed in oocytes. In addition, expression of genes related to metabolism (Prps1, Rpe, Rpia, Taldo1, and Tkt) decreased in ${\alpha}$-amanitin-treated CCs but not in oocytes. Therefore, we concluded that the transcriptional activities of CCs for supporting suitable transcripts, especially for its metabolic activities and formation of gap junctions among CCs as well as with oocytes, are important for oocytes maturation in COCs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.16-25
• /
• 1995

The effects of leaf removal time on variation of nodal sink components in determinated soybean ［Glycine max （L.） Merr.］ cultivar 'Danyeobkong' were measured at the experiment field of Chonbuk Provincial Rural Development Administration in 1991. Node order in this experiment was calculated from terminal node to bottom node to clarify the photosynthetic ability of canopy leaves. The upper 5 leaves from terminal node of main stem were removed at 5, 15, 25, 35 and 45 days after flowering(DAF) respectively. In spite of light-receiving increment in lower part of main stem and in branch by removing the upper part leaves of main stem, seed weight of that part was not increased in leaf removal treatment compared with control block. The node position reducing pod went down from terminal to bottom by delaying leaf removal time, and the influence of pod number reduction was bigger in DAF 25 than in DAF 15. But the seed number reduction per pod was the biggest in DAF 35. Cracked seed coat ratio ranged from 25% to 35% in control block, while that of leaf removal block had mostly 10% gap compared with the control block.rol block.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.3
• /
• pp.23-32
• /
• 2008

The computing power of graphics processing units(GPU) has already surpassed that of CPU and the gap between their powers is getting wider. Thus, research on GPGPU which applies GPU to general purpose becomes popular and shows great success especially in the field of parallel data processing. Since the implementation of cryptographic algorithm using GPU was started by Cook et at. in 2005, improved results using graphic libraries such as OpenGL and DirectX have been published. In this paper, we present skills and results of implementing block ciphers using CUDA library announced by NVIDIA in 2007. Also, we discuss a general method converting source codes of block ciphers on CPU to those on GPU. On NVIDIA 8800GTX GPU, the resulting speeds of block cipher AES, ARIA, and DES are 4.5Gbps, 7.0Gbps, and 2.8Gbps, respectively which are faster than the those on CPU.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.619-624
• /
• 2023

As the importance of digital competency education is highlighted, this study is a case study on block coding classes for elementary school students during vacation for the purpose of bridging the information education gap among students. The purpose of this study is to design and operate a play-centered block coding class program and find out if it is effective in improving students' interest. As a result of completing the teaching plan through the second consultation and revision, running the class, and analyzing the change in learning interest of the students through the t-test, the play-oriented block coding class designed in this study was effective in improving students' interest. In addition, it was possible to discover interesting elements such as student-led learning process and immersion through realistic play activities, friendship, collaboration, and communication through group activities. This study is significant in suggesting a plan to increase learning interest for students who are new to coding.