• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.184-189
• /
• 1997

A prompt fission gas release model incorporating the resistance to gas flow in the gap was developed and the effects of gap resistance and failure location on prompt fission gas release from the cladding breach were assessed. The process of prompt fission gas release from the plenum and gap into the coolant was modeled in accordance with three major phenomena: (1) transient gas flow in the gap, (2) the growth of the fission gas bubble while it is still attached to the breach, and (3) the detachment of the fission gas bubble from the breach and mixing with the coolant. The cumulative mass release fraction by the present model was calculated for the case of Young-Gwang 3 & 4 nuclear fuel rod as a typical example. The results showed that the release behavior of prompt fission gas with time was different from the frictionless model which has frequently been used in a simplified approach, and that the location of cladding failure was another key factor for the prompt fission gas release process due to the resistance in the gap.

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.135-141
• /
• 2021

Objective: To assess the effects of thermoforming on aligner thickness and gap width in six aligner systems with the same nominal thickness. Methods: Six passive upper aligners of different brands were adapted to a single printed cast. Each sample was evaluated with high-resolution micro-computed tomography. To investigate aligner thickness and gap width, two-dimensional (2D) analysis was conducted assessing the effects of the following variables: tooth type (central incisor, canine, and first molar), 2D reference points, and aligner type. Data were analyzed and compared using analysis of variance and Tukey's post-hoc tests (p < 0.05). Results: Tooth type, dental region, and aligner type affected both the gap width and aligner thickness. The aligner thickness remained moderately stable across the arch only in the F22. Conclusions: All thermoformed samples displayed smaller aligner thickness and gap width at anterior teeth and both gingival and coronal centers than at posterior teeth and occlusal surfaces.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.264-268
• /
• 1996

Panax-ginseng saponin has been known to exert various pharmacological effects on cellular metabolism. This study was performed to determine the effect of ginseng saponin on gap junction channel-mediated intercellular communication, using an established in vitro system of reconstituted gap junction channels. Gap junction channels are a specialized plasma membrane fraction, which are permeable to relatively large water-soluble molecules. The sucrose permeable property of reconstituted gap junction channels was completely inhibited with 0.1 % (w/v) of ginseng saponin. We also compared the effect of ginseng saponin with that of Triton X-100, a nonionic detergent, on the same system. Triton X-100 showed significantly different effect on sucrose-permeability of gap junction channel from that was affected by ginseng saponin. The structures of liposomes containing gap junction channels was significantly destroyed by Triton X-100.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.6
• /
• pp.18-23
• /
• 2008

In this paper, effects of inlet shape on the performance of a submerged cargo pump were numerically studied using a commercial CFD code ANSYS-CFX. The inlet shape, especially the gap between pump and suction well, is an important parameter in a point of view of performances of submerged cargo pump due to its effects on the residual and also hydraulic performance of the pump, respectively. To investigate the optimized gap, the overall performance degradations were calculated with the gap. In addition to that, the flow field through the gap was investigated to explain the effect of velocity non-uniformity on the performance of the pump impeller.

• Journal of Welding and Joining
• /
• v.23 no.1
• /
• pp.55-60
• /
• 2005

A three-dimensional Gaussian heat source model is modified to include the effects of the gap and thickness-difference for the laser keyhole welding. The gap of the butt joint influences the welding efficiency such that the melting area decreases linearly with the gap. When the different plate thickness is used such as the tailored blank welding, melting areas of the thick and thin plates are predicted by introducing the thickness-difference factor. The calculated results using the modified heat source show reasonably good agreements with the experimental results.

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.98-103
• /
• 2001

Root gap out of standard by welding deformation is frequently produced at butt weld joints of steel bridge. For example although standard root gap is below 6mm at butt weld joints of plates under 15mm thickness. maximum 35mm root opening is produced at the weld field. At this case, the part out of standard is generally built up and the rest part is welded by WPS. Direct welding without built-up welding is preferred in weld field because built-up welding process bring about the cost-up at manufacturing. To apply this direct weld to root gap out of standard, the investigation about mechanical properties and fatigue at weldment is required. Inthisstudy, therefore the verification for direct weld without built up is performed at weldment as root gap. It includes tension, bending. hardness, impact and fatigue test for each welding specimen of 6mm, 25mm, 35mm root gap.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.1
• /
• pp.149-157
• /
• 2023

Purpose : Genu varum is a condition characterized by a wider than normal gap between. This may be due to muscle weakness caused by poor posture, lifestyle, or lack of exercise. This study aimed to compare the effects of ball-based squats and narrow squats on muscle thickness, Q-angle, and the gap between the knees, in order to assess the potential for improving this condition. Methods : Twenty six adult participants with genu varum were randomly assigned to either a ball-based squat group (n=13) or a narrow squats group (n=13). Both groups performed their respective exercises three times weekly for 4 weeks. The data was analyzed using paired t-tests to compare pre- and post- intervention measurements within each group, and independent t-test was used to compare the two groups. Results : Both groups showed significant improvement in the thickness of the vastus lateralis and medialis, and rectus femoris muscles, as well as a significant decrease in the gap between the knees (p<.05). However, there was no significant difference in Q-angle variation between the two group. Furthermore, there was no significant differences in the Q-angle, gap between the knees, and muscle thickness variation between both groups. Conclusion : The results suggest that both ball-based squats and narrow squats are effective in improving muscle thickness and reducing the gap between the knees in adults with genu varum. However, there was no significant difference between the two types of squats in terms of their effects on the Q-angle. These findings highlight the potential for exercise interventions to address this common postural issue.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.545-548
• /
• 2002

Turbines have been known to be particularly susceptible to flow-induced self-excited vibration. In such vibrations, direct damping and cross stiffness effects of aerodynamic forces determine rotordynamic stability. In axial turbines with eccentric shrouded rotors, the non-uniform sealing gap causes azimuthal non-uniformities in the seal gland pressure and the turbine torque which destabilize the rotor system. Previously, research efforts focused solely on either the seal flow or the unshrouded turbine passge flow. Recently, a model for flow in a turbine with a statically offset shrouded rotor has been developed and some stiffness predictions have been obtained. The model couples the seal flow to the passage flow and uses a small perturbation approach to determine nonaxiymmetric flow conditions. The model uses basic conservation laws. Input parameters include aerodynamic parameters (e.g. flow coefficient, reaction, and work coefficient); geometric parameters (e.g. sealing gap, depth of seal gland, seal pitch, annulus height); and a prescribed rotor offset. Thus, aerodynamic stiffness predictions have been obtained. However, aerodynamic damping (i.e. unsteady aerodynamic) effects caused by a whirling turbine has not yet been examined. Therefore, this paper presents a new unsteady model to predict the unsteady flow field due to a whirling shrouded rotor in turbines. From unsteady perturbations in velocity and pressure at various whirling frequencies, not only stiffness but also damping effects of aerodynamic forces can be obtained. Furthermore, relative contributions of seal gland pressure asymmetry and turbine torque asymmetry are presented.

• Korean Journal of Social Welfare Studies
• /
• v.43 no.2
• /
• pp.345-366
• /
• 2012

This study analyze Family gaps(the wage gap between mothers and non-mothers) across the wages distribution in Korea using 2008 Korean Labor and Income Panel Study. Analysis models include Heckman's two stage estimation to control women's labor participation selection and Quantile regression method to examine the effects of children at different points of the wage distribution. The result indicates that first, comparing non-mothers, mothers with one child suffer statistically significant hourly wage losses at 25th, 50th, and 75th distribution, however not significant effects are found at lowest(10th) and highest(90th) distribution. Second, comparing non-mothers, mothers with two more children suffer statistically significant hourly wage losses at all distribution. Family gap differs across the wage distribution and highest family gaps are found at 25th distribution. With these results, the author suggests universal family policies to support mothers' labor participation and the reconciliation of work and family.

• The Journal of Information Systems
• /
• v.33 no.1
• /
• pp.69-90
• /
• 2024

Purpose In this paper, among the four information vulnerable groups(disabled, elderly, low-income, farmers and fishermen), the mediating effect of digital device usage attitudes in the effect of digital information utilization level of farmers and fishermen with a large digital information gap with the general public on life satisfaction was verified. Design/methodology/approach This study summarizes existing research related to the digital information gap between farmers and fishermen, and the empirical analysis is based on hierarchical regression analysis based on the 2022 Digital Information Gap Report (survey data on 2,200 farmers and fishermen) published by the Korea Intelligence Information Society Promotion Agency. Among the four major information vulnerable groups (the disabled, the elderly, low-income groups, and farmers and fishermen), attitudes toward using digital devices were examined in terms of the impact of the level of digital information use on life satisfaction among farmers and fishermen, who have a relatively large digital information gap with the general public. It was verified as a mediating effect. Findings As a result of the empirical analysis, attitudes toward the use of digital devices were found to play a mediating role in the impact of the level of digital information use on life satisfaction.