• Journal of Radiation Protection and Research
• /
• v.43 no.4
• /
• pp.154-159
• /
• 2018

Background: To prevent small leakage accidents, a real-time and direct detection system for small leaks with a detection limit below that of existing systems, e.g. $0.5gpm{\cdot}hr^{-1}$, is required. In this study, a small-size beta detector, which can be installed inside the reactor containment (CT) building and detect small leaks directly, was suggested and its feasibility was evaluated using MCNPX simulation. Materials and Methods: A target nuclide was selected through analysis of radiation from radionuclides in the reactor coolant system (RCS) and the spectrum was obtained via a silicon detector simulated in MCNPX. A window was designed to reduce the background signal caused by other nuclides. The sensitivity of the detector was also estimated, and its shielding designed for installation inside the reactor CT. Results and Discussion: The beta and gamma spectrum of the silicon detector showed a negligible gamma signal but it also contained an undesired peak at 0.22 MeV due to other nuclides, not the $^{16}N$ target nuclide. Window to remove the peak was derived as 0.4 mm for beryllium. The sensitivity of silicon beta detector with a beryllium window of 1.7 mm thickness was derived as $5.172{\times}10^{-6}{\mu}Ci{\cdot}cc^{-1}$. In addition, the specification of the shielding was evaluated through simulations, and the results showed that the integrity of the silicon detector can be maintained with lead shielding of 3 cm (<15 kg). This is a very small amount compared to the specifications of the lead shielding (600 kg) required for installation of $^{16}N$ gamma detector in inside reactor CT, it was determined that beta detector would have a distinct advantage in terms of miniaturization. Conclusion: The feasibility of the beta detector was evaluated for installation inside the reactor CT to detect small leaks below $0.5gpm{\cdot}hr^{-1}$. In future, the design will be optimized on specific data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.96-110
• /
• 2017

Most of vehicle detection studies using the existing general lens or wide-angle lens have a blind spot in the rear detection situation, the image is vulnerable to noise and a variety of external environments. In this paper, we propose a method that is detection in harsh external environment with noise, blind spots, etc. First, using a fish-eye lens will help minimize blind spots compared to the wide-angle lens. When angle of the lens is growing because nonlinear radial distortion also increase, calibration was used after initializing and optimizing the distortion constant in order to ensure accuracy. In addition, the original image was analyzed along with calibration to remove fog and calibrate brightness and thereby enable detection even when visibility is obstructed due to light and dark adaptations from foggy situations or sudden changes in illumination. Fog removal generally takes a considerably significant amount of time to calculate. Thus in order to reduce the calculation time, remove the fog used the major fog removal algorithm Dark Channel Prior. While Gamma Correction was used to calibrate brightness, a brightness and contrast evaluation was conducted on the image in order to determine the Gamma Value needed for correction. The evaluation used only a part instead of the entirety of the image in order to reduce the time allotted to calculation. When the brightness and contrast values were calculated, those values were used to decided Gamma value and to correct the entire image. The brightness correction and fog removal were processed in parallel, and the images were registered as a single image to minimize the calculation time needed for all the processes. Then the feature extraction method HOG was used to detect the vehicle in the corrected image. As a result, it took 0.064 seconds per frame to detect the vehicle using image correction as proposed herein, which showed a 7.5% improvement in detection rate compared to the existing vehicle detection method.

• Nutrition Research and Practice
• /
• v.4 no.1
• /
• pp.23-29
• /
• 2010

Poly-gamma-glutamic acid ($\gamma$-PGA) is a mucilaginous and biodegradable compound produced by Bacillus subtilis from fermented soybeans, and is found in the traditional Korean soy product, cheongkukjang. This study was carried out to evaluate the effects of $\gamma$-PGA from a food source on the concentration of the neurotransmitter GABA and its metabolic precursor glutamate in diet-induced obese rats. Eight-week old male Sprague-Dawley rats (n=60) were used. The rats were divided into two groups and obesity was induced by providing either a 10% control fat or 45% high fat diet for 5 weeks. The rats were then blocked into 6 groups and supplemented with a 0.1% $\gamma$-PGA diet for 4 weeks. After sacrifice, brain and serum GABA and glutamate concentrations were analyzed by high performance liquid chromatography with fluorometric detection. The rats fed the high fat diet had significantly increased body weights. $\gamma$-PGA supplementation significantly increased serum concentrations of glutamate and GABA in the control fat diet groups while this effect was not found in the high fat groups. In the brain, glutamate concentrations were significantly higher in the $\gamma$-PGA supplemented groups both in rats fed the normal and high fat diets than in the no $\gamma$-PGA controls. GABA concentrations showed the same tendency. The results indicated that $\gamma$-PGA intake increased GABA concentrations in the serum and brain. However, the effects were not shown in obese rats.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.36-41
• /
• 2012

We have been performed on $Co^{60}$ ${\gamma}$-ray irradiation of South Sea cultured pearls, with the absorbed dose of 0.1~100 kGy at room temperature. In addition, it was investigated electron paramagnetic resonance (EPR) and amino acid analysis (AAA) for detection of Gamma irradiated South Sea cultured pearls. It was observed that the irradiated South Sea cultured pearls revealed additional free radical peak such as $CO_2^-$, at a g-factor of $2.001{\pm}0.002$ in EPR spectra. From the amino acid analysis (AAA), it was shown that some of amino acid in the protein of the nacre destroyed after ${\gamma}$-ray; glutamic acid residue by 11.43 %, alanine by 3.11 %, and histidine by 43.75 %. It was useful to detect the irradiated South Sea cultured pearls by EPR measurement in our study.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.315-319
• /
• 2007

Biofilm formation on various surfaces is a well-known phenomenon and it has caused pollution problems, health and safety hazards, and substantial economic loss in many areas including the food industry. In the present study, Gamma irradiation at a dose of 2.0 kGy reduced the bacterial counts of Staphylococcus aureus and Pseudomonas aeruginosa suspensions by 6.7 and >6.5 log CFU/mL, respectively, and 30 ppm of sodium hypochlorite effectively reduced the counts of both bacterial suspensions to below the limit of detection ($<2\;log\;CFU/cm^2$). However, in bacterial biofilms attached to stainless steel, gamma irradiation at a dose of 10.0 kGy reduced the counts of S. aureus attached fur 1 hr and overnight by ${\geq}5.1\;and\;5.0\;log\;CFU/cm^2$, respectively. Gamma irradiation at a dose of 1.0 kGy reduced the counts of P. aeruginosa counts to below the limit of detection ($<2\;log\;CFU/cm^2$). On the contrary, S. aureus and P. aeruginosa cells attached to stainless steel chips were difficult to eliminate using sodium hypochlorite. Four hundred ppm of sodium hypochlorite reduced the counts of S. aureus and P. aeruginosa attached for 1 hr by 2.5 and $3.3\;log\;CFU/cm^2$, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.702-704
• /
• 2017

In case of dismantling of nuclear power generation facility or radiation accident, the accurate information of gammaray source is essential for rapid decontamination. In order to more efficiently represent the position of the gamma ray to be removed, we create a spatial domain based on the real image. And we can perform decontamination of gamma-ray source more quickly by expressing the distribution of radiation source. The developed gamma ray imaging device overlaps with the visible image after gamma - ray detection and provides only two - dimensional image, but it does not show the distance information to the source. In this paper, we have developed a operation environment using the 3D visualization model for reporting effective decontamination operation.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.155-163
• /
• 2020

To investigate the optimal detector material for prompt gamma imaging during boron neutron capture therapy, in this study, we evaluated the characteristic regarding radiation reaction of available detector materials using a Monte Carlo simulation. Sixteen detector materials used for radiation detection were investigated to assess their advantages and drawbacks. The estimations used previous experimental data to build the simulation codes. The energy resolution and detection efficiency of each material was investigated, and prompt gamma images during BNCT simulation were acquired using only the detectors that showed good performance in our preliminary data. From the simulation, we could evaluate the majority of detector materials in BNCT and also could acquire a prompt gamma image using the six high ranked-detector materials and lutetium yttrium oxyorthosilicate. We provide a strategy to select an optimal detector material for the prompt gamma imaging during BNCT with three conclusions.

• Journal of Radiation Industry
• /
• v.6 no.3
• /
• pp.239-244
• /
• 2012

This study was conducted to investigate bacterial growth, viscosity, color, and sensory properties of gamma-irradiated Tarakjuk powder, a Korean milk porridge powder, at 1, 3, 5, 7, and 10 kGy. The total aerobic bacteria in non-irradiated Tarakjuk powder was $2.56{\log}\;CFU{\cdot}g^{-1}$, whereas it was not observed within the detection limit of $2{\log}\;CFU{\cdot}g^{-1}$ in samples irradiated at more than 1 kGy. Spore-forming bacteria, however, were not observed in all samples within the detection limit of $1{\log}\;CFU{\cdot}g^{-1}$. The viscosity of rehydrated Tarakjuk after gamma irradiation significantly decreased from 16,770 cP to 4,060 cP when irradiated at 10 kGy. The redness ($a^*$ value) and yellowness ($b^*$ value) evaluated using a colorimeter were significantly increased according to the increase in irradiation dose (p<0.05), while there was no difference in color evaluation conducted by panels. The overall acceptance decreased as the irradiation dose increased, and the 5 kGy sample was 4.0 (normal) on a 7-point scale. As a result, it is considered that a gamma irradiation of 5 kGy is enough to sterilize Tarakjuk powder with a acceptable sensory quality.

• Journal of Radiation Protection and Research
• /
• v.9 no.1
• /
• pp.11-18
• /
• 1984

A Standard gamma-ray ionization chamber system was developed with a well type ionization chamber and micro current measuring circuit. Micro current was measured by the automatic Townsend balance with stepwise compensation method. For gamma emitting nuclides such as $^{241}Am,\;^{133}Ba,\;^{60}Co,\;^{134}Cs,\;^{137}Cs,\;and\;^{22}Na$ relative calibration factors to $^{226}Ra$ reference source were calculated and detection .efficiency curve was determined as a fudnction of gamma energy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.154-158
• /
• 2003

In this study, to measure the density of compaction, it is designed to use the 5 gamma-ray detectors. The developed instrument consists of measuring circuits for gamma-rays and thermal neutrons, a high voltage supply unit, stable circuit unit, count circuit unit and a microprocessor. To read count pulse from gamma-ray detectors are very accurate and it can be count to data calibration excluded count of ripple.