• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.143-145
• /
• 2016

In order to find suitable source and drain (S/D) electrodes for amorphous InGaZnO thin film transistors (a-IGZO TFTs), the specific contact resistance of interface between the channel layers and various S/D electrodes, such as Ti/Au, a-IZO and multilayer of a-IGZO/Ag/a-IGZO, was investigated using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes had good performance and low contact resistance due to the homo-junction with channel layer. The stability was measured with different electrodes by a positive bias stress test. The result shows the a-IGZO TFTs with a-IGZO/Ag/a-IGZO electrodes were more stable than other devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.119-122
• /
• 2008

In this paper, we describe the current status and issues of the oxide thin-film transistors (OTFTs), which attract much attention as an emerging new backplane technology replacing conventional silicon-based TFTs technologies. First, the unique benefits of OTFTs will be presented as a backplane for large-sized AMOLED including note-book PC, second TV and HD-TV. And then, the state-of-the-art transistor performance and uniformity characteristics of OTFTs will be highlighted. The obtained a-IGZO TFTs exhibited the field-effect mobility of $18\;cm^2/Vs$, threshold voltage of 1.8 V, on/off ratio of $10^9$, and subthreshold gate swing of 0.28 V/decade. In addition, the world largest-sized 12.1-inch WXGA active-matrix organic light emitting diode (AMOLED) display is demonstrated using indium-gallium-zinc oxide (IGZO) TFTs.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1489-1498
• /
• 2015

Gallium nitride (GaN)-based power switching devices, such as high-electron-mobility transistors (HEMT), provide significant performance improvements in terms of faster switching speed, zero reverse recovery, and lower on-state resistance compared with conventional silicon (Si) metal-oxide-semiconductor field-effect transistors (MOSFET). These benefits of GaN HEMTs further lead to low loss, high switching frequency, and high power density converters. Through simulation and experimentation, this research thoroughly contributes to the understanding of performance characterization including the efficiency, loss distribution, and thermal behavior of a 160-W GaN-based synchronous boost converter under various output voltage, load current, and switching frequency operations, as compared with the state-of-the-art Si technology. Original suggestions on design considerations to optimize the GaN converter performance are also provided.

• 전자공학회논문지
• /
• 제51권2호
• /
• pp.33-37
• /
• 2014

본 논문에서는 AlGaN/GaN HFET의 누설전류 특성을 개선하고자 산화갈륨 희생층 공정을 이용한 새로운 패시베이션 공정을 제안하였다. 오믹 전극 형성시 고온 열처리 과정으로 인해 갈륨의 표면 손상이 불가피하다. 표면 손상을 방지하기 위해 보편적으로 선표면처리 공정을 사용하기도 하지만 이러한 방법만으로는 표면 손상을 완전히 없애기 어렵다. 본 연구에서 새롭게 제안된 산화갈륨 희생층을 이용한 공정 방법은 고온 열처리 후 손상된 표면에 $O_2$ 플라즈마 처리를 통해 산화갈륨층을 형성한 뒤, 염화수소를 이용하여 산화갈륨층을 식각한다. 우수한 상태의 표면 상태를 얻을 수 있었으며, 누설전류의 확연한 감소로 subthreshold slope이 개선되었을 뿐만 아니라 최대 드레인 전류 특성도 594 mA/mm에서 634 mA/mm로 증가하였다. 질화갈륨 희생층 공정의 효과를 분석하기 위해 X-선 광전자 분광법을 이용하여 질화갈륨의 표면 변화에 대해 살펴보았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.352.1-352.1
• /
• 2014

Indium Tin Oxide (ITO) films are the most extensively studied and commonly used as ones of TCO films. The ITO films having a high electric conductivity and high transparency are easily fabricated on glass substrate at a substrate temperature over $250^{\circ}C$. However, glass substrates are somewhat heavy and brittle, whereas plastic substrates are lightweight, unbreakable, and so on. For these reasons, it has been recently suggested to use plastic substrates for flexible display application instead of glass. Many reaearchers have tried to produce high quality thin films at rood temperatures by using several methods. Therefore, amorphous ITO films excluding thermal process exhibit a decrease in electrical conductivity and optical transparency with time and a very poor chemical stability. However the amorphous Indium Gallium Zinc Oxide (IGZO) offers several advantages. For typical instance, unlike either crystalline or amorphous ITO, same and higher than a-IGZO resistivity is found when no reactive oxygen is added to the sputter chamber, this greatly simplifies the deposition. We reported on the characteristics of a-IGZO thin films were fabricated by RF-magnetron sputtering method on the PEN substrate at room temperature using 3inch sputtering targets different rate of Zn. The homogeneous and stable targets were prepared by calcine and sintering process. Furthermore, two types of IGZO TFT design, a- IGZO source/drain material in TFT and the other a- ITO source/drain material, have been fabricated for comparison with each other. The experimental results reveal that the a- IGZO source/drain electrode in IGZO TFT is shown to be superior TFT performances, compared with a- ITO source/drain electrode in IGZO TFT.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.8-8
• /
• 2009

Thin-film transistors (TFTs) were fabricated using amorphous indium gallium zinc oxide (a-IGZO) channels by rf-magnetron sputtering at room temperature. We have studied the effect of oxygen partial pressure on the threshold voltage($V_{th}$) of a-IGZO TFTs. Interestingly, the $V_{th}$ value of the oxide TFTs are slightly shifted in the positive direction due to increasing $O_2$ ratio from 1.2 to 1.8%. The device performance is significantly affected by varying $O_2$ ratio, which is closely related with oxygen vacancies provide the needed free carriers for electrical conduction.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.648-652
• /
• 2014

We have investigated the effect of electrical properties of amorphous InGaZnO thin film transistors (a-IGZO TFTs) by post thermal annealing in $O_2$ ambient. The post-annealed in $O_2$ ambient a-IGZOTFT is found to be more stable to be used for oxide-based TFT devices, and has better performance, such as the on/off current ratios, sub-threshold voltage gate swing, and, as well as reasonable threshold voltage, than others do. The interface trap density is controlled to achieve the optimum value of TFT transfer and output characteristics. The device performance is significantly affected by adjusting the annealing condition. This effect is closely related with the modulation annealing method by reducing the localized trapping carriers and defect centers at the interface or in the channel layer.

• Journal of Information Display
• /
• 제11권4호
• /
• pp.165-168
• /
• 2010

A solution-processed multicomponent oxide, yttrium hafnium zinc oxide (YHZO), was synthesized and deposited as a gate insulator. The YHZO film annealed at $600^{\circ}C$ contained an amorphous phase based on the results of thermogravimetry, differential thermal analysis, and X-ray diffraction. The electrical characteristics of the YHZO film were analyzed by measuring the leakage current. The high dielectric constant (16.4) and high breakdown voltage (71.6 V) of the YHZO films resulted from the characteristics of $HfO_2$ and $Y_2O_3$, respectively. To examine if YHZO can be applied to thin-film transistors (TFTs), indium gallium zinc oxide TFTs with a YHZO gate insulator were also fabricated. The desirable characteristics of the YHZO films when used as a gate insulator show that the limitations of the general binary-oxide-based materials and of the conventional vacuum processes can be overcome.

• 전기화학회지
• /
• 제12권2호
• /
• pp.189-195
• /
• 2009

고순도의 $\beta-Ga_{2}O_{3}$ 나노로드(nanorods)가 니켈산화물 나노입자를 촉매로 사용하고 갈륨금속분말을 원료물질로 이용하여 화학기상증착법으로 합성되었다. 전계방출형 주사전자현미경을 이용하여 $\beta-Ga_{2}O_{3}$ 나노로드를 관찰한 결과, 평균직경은 약 160 nm 그리고 평균길이는 $4{\mu}m$였으며 vaporsolid(VS) 성장기구를 통하여 성장되었음을 알 수 있었다. X-선 회절시험과 고분해능 투과전자 현미경을 이용한 결정구조 분석 결과, 합성된 나노로드의 내부는 단사정계 결정구조를 가지는 단결정의 $\beta-Ga_{2}O_{3}$로 이루어져 있고 외벽은 비정질 갈륨옥사이드로 이루어진 코어-셀 구조로 구성되어 있는 것을 확인하였다. 합성된 $\beta-Ga_{2}O_{3}$ 나노로드를 음극 활물질로 사용하여 전극을 제조하고 전기화학적 특성을 분석한 결과, 리튬/$\beta-Ga_{2}O_{3}$ 나노로드 전지는 첫 방전 시 867 mAh/g-$\beta-Ga_{2}O_{3}$의 높은 용량을 나타내었으나 초기 비가역 용량으로 인해 62%의 낮은 충 방전 효율을 나타내었다. 그러나 5 사이클 이후 높은 충 방전 효율을 보이며 30 사이클까지 안정된 사이클 특성을 나타내었다.

• 한국결정성장학회지
• /
• 제32권4호
• /
• pp.121-127
• /
• 2022

초광역대 반도체인 β-Ga₂O₃은 고전력 반도체 소재에 대한 유망한 응용으로 인해 큰 주목을 받고 있다. 5가지 다른 다형 중 가장 안정적인 상인 β-Ga₂O₃는 4.9 eV의 넓은 밴드갭과 8 MV/cm의 높은 항복 전계를 갖는다. 또한, 이는 용융 소스로부터 성장될 수 있어 전력반도체용 SiC, GaN 및 다이아몬드와 같은 다른 와이드 밴드갭 반도체보다 더 높은 성장률과 더 낮은 제조 비용으로 성장이 가능하다. 이 연구에서 β-Ga₂O₃ 단결정 성장은 EFG(edge-defined film-fed growth) 방법에 의해 성장되었다. 성장 방향과 주면을 각각 β-Ga₂O₃ 결정의 [010] 방향과 (100)면으로 성장하였다. Raman 분석의 스펙트럼으로 β-Ga₂O₃ 잉곳의 결정상과 불순물을 확인하였고, 고해상도 X선 회절(HRXRD)을 이용하여 결정 품질과 결정 방향을 분석하였다. 또한 EFG 방법으로 성장한 β-Ga₂O₃ 리본형태의 잉곳을 각 위치별로 결정 품질과 다양한 특성을 체계적으로 분석하였다.