• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.102-102
• /
• 2008

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.139-141
• /
• 2015

Contact resistance of interface between the channel layers and various S/D electrodes was investigated by transmission line method. Different electrodes such as Ti/Au, a-IZO, and multilayer of a-IGZO/Ag/a-IGZO were compared in terms of contact resistance, using the transmission line model. The a-IGZO TFTs with a-IGZO/Ag/a-IGZO of S/D electrodes showed good performance and low contact resistance due to the homo-junction with channel layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.626-630
• /
• 2022

A 100 mm × 50 mm-sized (100) gallium oxide (Ga₂O₃) single crystal ingot was successfully grown by edge-defined film-fed growth (EFG). The preferred orientation and the quality of grown Ga₂O₃ ingot were compatible with a commercial Ga₂O₃ substrate by showing strong (100) orientation behaviors and 246 arcsec in X-ray rocking curve. Raman characterization was also performed for both samples; thereby providing various Raman-active characteristics of Ga₂O₃ crystals. In particular, we observed A_g(5) and A_g(10) peaks of Raman active mode, directly related to the impurity of the grown Ga₂O₃ crystal. Hence, the comparison of the crystal quality and Raman analysis might be useful for further enhancement of Ga₂O₃ single crystal quality in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.74-80
• /
• 2023

Gallium oxide (Ga₂O₃) thin films were grown on c-, a-, m-, r-plane sapphire substrates using a mist chemical vapor deposition system. Various growth temperature range of 400~600℃ was applied for Ga₂O₃ thin film deposition. Then, several structural properties were characterized such as film thickness, crystal phase, lattice orientation, surface roughness, and optical bandgap. Under the certain growth temperature of 500℃, all grown Ga₂O₃ featured rhombohedral crystal structures and well-aligned preferred orientation to sapphire substrate. The films grown on c-and r-plane sapphire substrates, showed low surface roughness and large optical bandgap compared to those on a-and m-plane substrates. Therefore, various sapphire orientation can be potentially applicable for future Ga₂O₃-based electronics applications.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.163-168
• /
• 2014

Bottom gate thin-film transistors were fabricated using solution processed IGZO channel layers with various gallium composition ratios that were annealed on a hot plate. Increasing the gallium ratio from 0.1 to 0.6 induced a threshold voltage shift in the electrical characteristics, whereas the molar ratio of In:Zn was fixed to 1:1. Among the devices, the IGZO-TFTs with gallium ratios of 0.4 and 0.5 exhibited suitable switching characteristics with low off-current and low SS values. The IGZO-TFTs prepared from IGZO films with a gallium ratio of 0.4 showed a mobility, on/off current ratio, threshold voltage, and subthreshold swing value of $0.1135cm^2/V{\cdot}s$, ${\sim}10^6$, 0.8 V, and 0.69 V/dec, respectively. IGZO-TFTs annealed at $300^{\circ}C$, $350^{\circ}C$, and $400^{\circ}C$ were also fabricated. Annealing at lower temperatures induced a positive shift in the threshold voltage and produced inferior electrical properties.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.101-106
• /
• 2011

The separation of germanium and gallium ion with metal oxide was introduced into the development of $^{68}Ge/^{68}Ga$ generator. Germanium and gallium within mixed solution were respectively separated by using a liquid-liquid extraction and a column chromatographic method. The separation of Ge within high concentrated hydrochloric and sulfuric acid was conducted by the extraction to $CCl_4$ and the back-extraction to 0.05 M HCl. An optimum condition of the extraction by $CCl_4$ was in 5~7 M HCl and efficiency was around 80%. The gallium was selectively separated by using $Al_2O_3$ among metal oxides as sorbents from the mixed solution in 0.04~0.10 M HCl condition.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.60.1-60.1
• /
• 2011

비정질 indium-gallium-zinc-oxide (a-IGZO)는 thin film transistor (TFT)에 적용되는 대표적인 active layer로써 높은 이동도를 갖고, 도핑 농도의 제어가 용이하며 낮은 온도에서도 대면적에 증착할 수 있는 특성을 가지고 있다. 특히 저온에서 대면적 증착이 가능한 장점을 갖고 있어 LCD 분야뿐만 아니라 다양한 분야에서 상용화하려는 연구가 시도되고 있다. a-IGZO를 구성하는 물질 중에 이동도에 중요한 역할을 미치는 In은 대표적인 투명전극물질인 indium-tin oxide (ITO)에서 고전류 구동에 의한 확산이 널리 알려져 이에 대한 증명과 개선을 위한 연구가 진행되고 있다. 보고된 결과에 따르면 device에 지속적인 구동 전압을 가했을 때 In이 유기층로 확산되어 organic light emitting diode(OLED)의 성능을 저하시키는 것으로 알려져 있다. 따라서, a-IGZO에서도 고전류 구동에 의한 indium의 이동이 필수불가결하다고 판단된다. 본 연구에서는 a-IGZO TFT에 고전압 구동을 반복적으로 시행함으로써 발생하는 전기적 특성의 변화를 확인하였고, 동일한 소자의 전극과 채널 사이의 계면에서 In 분포를 energy dispersive spectrometer (EDS)로 관찰하여 In 분포와 전기적 특성 간의 상관관계에 대해 연구하였다.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.404-408
• /
• 1999

Gallium doped zinc oxide(GZO) films were deposited on soda-lime glass substrates without substrate heating $(T_s<50^{\circ}C$) by dc planar magnetron sputtering using GZO ceramic oxide targe with different inert gas (Ar, or Ne). For the GZO films deposited under different total gas pressure $(P_{tot})$, structural and electrical properties were investigated by XRD and Hall effect measurements. Crystallinity of GZO films deposited using Ar was degraded with increase in $(P_{tot})$, suggesting that it was heavily affected by kinetic energy of sputtered Zn particles$(PA_{zn})$ arriving at substrate surface. Whereas, crystallinity of GZO films deposited at lower Ptot than 3.0 Pa using Ne gas was degraded with decrease in $(P_{tot})$. This degradation was considered to be result of film damage caused by the bombardment of high-energy neutrals ($Ne^{\circ}$). On the basis of a hard sphere collision processes, the average final energy of particles (sputtered Zn, $Ar^{\circ}$and $Ne^{\circ}$)arriving at substrate surface were estimated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.95-95
• /
• 2011

비정질 산화물 반도체(Amorphous oxide semiconductors: AOSs)는 대면적화에도 불구하고 높은 이동도를 가지고, 상온에서도 제작할 수 있고, 투명 플렉시블 디스플레이 소자에 사용할 수 있기 때문에 최근 들어 각광받고 있는 연구 분야이다. 본 연구에서는 스퍼터링을 이용하여 활성층을 Amorphous indium gallium zinc oxide(a-IGZO)로 증착할 시에 스퍼터의 파워와 챔버내의 Ar/O2 비율을 다르게 했을 때 소자에 미치는 영향을 MIS구조를 이용하여 분석했다. 또한 같은 조건의 a-IGZO 활성층을 사용한 박막트랜지스터(TFT) 소자의 절연막의 종류를 바꿔가며 제작했을때의 소자의 특성 변화에 대해서도 분석하였다. 먼저 60 nm 두께의 a-IGZO층을 Heavily doped된 N형 실리콘 기판위에 스퍼터링 파워와 가스 분압비를 달리하여 증착하였다. 그 후 30 nm두께의 SiO2, Al2O3, SiNx 절연막을 증착하고, 마지막으로 열 증발 증착장비(Thermal Evaporator)를 이용하여 Al 전극을 150nm 증착하였다. 소자의 전기적 특성 분석은 HP4145와 Boonton 720을 사용하여 I-V와 C-V를 측정하였다. 위의 실험으로부터 스퍼터에서의 증착 rf파워가 증가할수록 a-IGZO 박막 트랜지스터에서의 캐리어 이동도가 감소하는 것을 볼 수 있었고, 챔버내의 가스분압비와 소자의 절연막의 종류가 변하면 a-IGZO 박막 트랜지스터의 전기적 특성이 변하는 것을 볼 수 있었다. 이러한 캐리어 이동도의 감소와 전기적 특성의 변화의 이유는 a-IGZO 활성층의 bulk trap과 절연막, 활성층 사이의 interface trap에 의한 것으로 보여진다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.546-549
• /
• 2009

In this paper, we investigated the effects of different source/drain (S/D) electrode materials in thin film transistors (TFTs) based on indium-gallium-zinc oxide (IGZO) semiconductor. A transfer length and effective resistances between S/D electrodes and amorphous IGZO thin-film transistors were examined. Intrinsic TFT parameters were extracted by the transmission line method (TLM) using a series of TFTs with different channel lengths measured at a low drain voltage. The TFTs fabricated with Cu S/D electrodes showed the lowest contact resistance and transfer length indicating good ohmic characteristics, and good transfer characteristics with a field-effect mobility (${\mu}_{FE}$) of 10.0 $cm^2$/Vs.