• Title/Summary/Keyword: Gain-switching

Search Result 282, Processing Time 0.047 seconds

A Gain-Clamped Erbium-Doped Fiber Amplifier (GC-EDFA) for WDM Optical Packet Switching System (WDM 광패킷스위칭 시스템을 위한 이득 제어 어븀첨가 광섬유증폭기)

  • 양충열;황현용;홍현하;김해근;김환우
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.9B
    • /
    • pp.1203-1208
    • /
    • 2001
  • 1545∼1560nm 파장의 C 대역에서 0.8nm 간격의 16 채널 WDM을 갖는 펌프 LD 타입의 2단 이득 제어 어븀 첨가 광섬유증폭기(GC-EDFA)를 버스트 패킷 모드 광스위칭 시스템에 사용하기 위하여 실험을 통해 입증하였다.

  • PDF

Modeling of the Sampling Effect in the P-Type Average Current Mode Control

  • Jung, Young-Seok;Kim, Marn-Go
    • Journal of Power Electronics
    • /
    • v.11 no.1
    • /
    • pp.59-63
    • /
    • 2011
  • This paper presents the modeling of the sampling effect in the p-type average current mode control. The prediction of the high frequency components near half of the switching frequency in the current loop gain is given for the p-type average current mode control. By the proposed model, the prediction accuracy is improved when compared to that of conventional models. The proposed method is applied to a buck converter, and then the measurement results are analyzed.

Z-Source Converter with Maximum Boost Voltage Gain

  • Nguyen, Minh-Khai;Jung, Young-Gook;Lim, Young-Cheol
    • Proceedings of the KIPE Conference
    • /
    • 2008.10a
    • /
    • pp.112-114
    • /
    • 2008
  • This paper proposes a new two-stage Z-source converter (TSZC). The purpose of the proposed system is to obtain the ac voltage with a maximum boost voltage for fuel cell applications as a renewable energy source. In order to provide a continuous current path, a switching strategy for the dc-ac ZSI and ac-ac ZSC of the proposed system was used. The operation principle, analysis and simulation results of 1.2 kW fuel cell stack were also presented.

  • PDF

Charge/Discharge Mode Conversion Method of Bi-directional Soft-switching Converter with High Voltage Gain (고승압 소프트스위칭 양방향 컨버터의 충방전 모드전환 기법)

  • Kwon, Minho;Jeong, Heonsoo;Choi, Sewan
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.185-186
    • /
    • 2012
  • 본 논문에서는 고승압 소프트스위칭 양방향 컨버터의 스위칭 모드절환 시점을 제안하여 전류의 불연속 구간이 발생되지 않는 방법을 소개하여 일반적인 부스트 컨버터와 같이 일반적인 제어 알고리즘을 적용 가능함을 검증하였고 시뮬레이션 및 실험을 통해 타당성을 검증하였다.

  • PDF

A Study on Structural Relationships among Port Service Quality, Satisfaction, Trust and Loyalty of the Busan New Port -Based on the Moderating Effect of Switching Barrier (부산항 신항의 항만서비스품질.만족.신뢰 및 충성도 간의 구조적 관계: 전환장벽의 조절효과를 중심으로)

  • Kang, Dug-Chool;Jeon, Oi-Sul
    • Journal of Korea Port Economic Association
    • /
    • v.28 no.1
    • /
    • pp.203-227
    • /
    • 2012
  • Based on the review of the existing studies, this study built the conceptual framework describing the structural relationships among port service quality dimensions(port internal service quality, external service quality, interaction quality), customer satisfaction, customer trust and customer loyalty. In specific, switching barrier was included as moderator in customer satisfaction and customer loyalty relationships. The subjects are the customers who use the Busan New Port. A survey using 317 customers was conducted, Confirmatory factor analysis was conducted to test the validity of the measurement model, and AMOS analysis approach was used to gain important insights into how customer retention in the port business can be ensured. Results in this paper indicate that customer trust and satisfaction are identified as antecedents of the port service quality dimensions. Customer satisfaction positively influences trust. Customer trust and satisfaction positively influence loyalty. Switching barrier positively moderates the relationship of customer satisfaction and customer loyalty. Finally, this study suggests that the implications of these findings and offers directions for future research.

Design of the Feed Forward Controller in Digital Method to Improve Transient Characteristics for Dynamic Voltage Restorers (동적전압보상기의 과도특성을 개선하기 위한 디지털방식의 전향제어기 설계)

  • 김효성;이상준;설승기
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.3
    • /
    • pp.275-284
    • /
    • 2004
  • This paper discusses how to control the compensation voltages in dynamic voltage restorers (DVR). On analyzing the power circuit of a DVR system, control limitations and control targets are presented for the voltage compensation in DVRs. Based on the preceded power stage analysis, a novel controller for the compensation voltages of DVRs is proposed by a feed forward control scheme. This paper discusses also the time delay problems in the control system of DVRs. Digitally controlled DVR systems normally have control delay at amount of one sampling time of the control system and a half of the switching period of the DVR inverter. The control delay in digital controllers increases the dimension of the system transfer function one degree higher, which makes the control system more complicate and more unstable. This paper proposes a guide line to design the control gain, appropriate output filter parameters and inverter switching frequency for DVRs with digital controllers. Proposed theory is verified by an experimental DVR system with a full digital controller.

High Step-up Interleaved CCM-ZVZCS Converters (고승압 인터리빙 CCM-ZVZCS 컨버터)

  • Park, Yo-Han;Choi, Se-Wan;Choi, Woo-Jin;Lee, Kyo-Beum
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.16 no.2
    • /
    • pp.114-121
    • /
    • 2011
  • This paper proposes a soft-switching interleaved boost converter which is suitable for high step-up and high power applications. Compared to the conventional boost converter the proposed converter can achieve approximately doubled voltage gain using the same duty cycle. The voltage ratings of the switch and diode are reduced to half, which result in the use of devices with lower $R_{DS(ON)}$ and on drop leading to reduced conduction losses. Also, voltage ratings of the passive components are reduced, and therefore the total energy volume is reduced to half. Further, the switch is turned on with ZVS in the CCM operation, and the diode is turned off with ZCS which results in negligible surge caused by diode reverse recovery leading to reduced switching losses. The validity of the proposed converter is proved through a 2kW prototype.

Implementation of DS-UWB Impulse Generator with Suppression of Frequency Band for WLAN (WLAN 주파수 대역이 억제된 DS-UWB 임펄스 생성기 구현)

  • Park, Chong-Dae;Kim, Bum-Joo;Kim, Dong-Ho
    • Journal of Advanced Navigation Technology
    • /
    • v.10 no.1
    • /
    • pp.13-19
    • /
    • 2006
  • In this paper, Gaussian impulse generator for DS-UWB was proposed and fabricated so that the frequency band allocated to WLAN, around 5 GHz, was suppressed in accordance with the regulation of radiation spectrum limitation defined by FCC. In order to transform an unipolar rectangular signal to a Gaussian impulse, the proposed impulse generator consists of two stage impulse generation parts; the first stage using dual SRD and the second stage using gain switching of semiconductor laser diode. The result shows a gaussian impulse as narrow as 180 psec in width. In addition, high order derivative Gaussian filter with a structure of 4 stage ring resonators was designed and fabricated so that DS-UWB impulse generator could reduce the frequency spectrum of WLAN by 25 dB compared to the spectral power of th adjacent UWB band.

  • PDF

Single-Electron Logic Cells and SET/FET Hybrid Integrated Circuits

  • Kim, S.J.;Lee, C.K.;Lee, J.U.;Choi, S.J.;Hwang, J.H.;Lee, S.E.;Choi, J.B.;Park, K.S.;Lee, W.H.;Paik, I.B.;Kang, J.S.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.6 no.1
    • /
    • pp.52-58
    • /
    • 2006
  • Single-electron transistor (SET)-based logic cells and SET/FET hybrid integrated circuits have been fabricated on SOI chips. The input-output voltage transfer characteristic of the SET-based complementary logic cell shows an inverting behavior where the output voltage gain is estimated to be about 1.2 at 4.2K. The SET/FET output driver, consisting of one SET and three FETs, yields a high voltage gain of 13 and power amplification with a wide-range output window for driving next circuit. Finally, the SET/FET literal gate for a multi-valued logic cell, comprising of an SET, an FET and a constant-current load, displays a periodic voltage output of high/low level multiple switching with a swing as high as 200mV. The multiple switching functionality of all the fabricated logic circuits could be enhanced by utilizing a side gate incorporated to each SET component to enable the phase control of Coulomb oscillations, which is one of the unique characteristics of the SET-based logic circuits.