• ETRI Journal
• /
• v.29 no.5
• /
• pp.670-672
• /
• 2007

An ultra-wideband low-noise amplifier is proposed with operation up to 8.2 GHz. The amplifier is fabricated with a 0.18-${\mu}m$ CMOS process and adopts a two-stage cascode architecture and a simplified Chebyshev filter for high gain, wide band, input-impedance matching, and low noise. The gain of 19.2 dB and minimum noise figure of 3.3 dB are measured over 3.4 to 8.2 GHz while consuming 17.3 mW of power. The Proposed UWB LNA achieves a measured power-gain bandwidth product of 399.4 GHz.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.817-823
• /
• 2010

Design of IPI feeding structure affecting the antenna gain improvement of mobile phone was investigated. IPI feeder which based on the T matching theory increase line current for internal antenna such as IFA. So IPI feeder makes higher radiation resistance, and also increases the gain with increasing radiation efficiency. To verify IPI feeding effect, feeder is applied to conventional CDMA/DCS dual band IFA. Measurement shows that IPI-IFA has 0.5 ~ 1.4[dBi] higher gain than conventional IFA at CDMA/DCS band. Resonant frequency did not change.

• Journal of the Optical Society of Korea
• /
• v.19 no.3
• /
• pp.297-302
• /
• 2015

Terahertz (THz) wave generation from bulk and periodically poled $LiTaO_3$ (PPLT) with a Cherenkov phase matching scheme is numerically investigated. It is shown that by using the crystal birefringence of bulk $LiTaO_3$ and a grating vector of PPLT, THz waves can be efficiently generated by difference frequency generation (DFG) with a Cherenkov phase matching scheme. The frequency tuning characteristics of the THz wave via varying wavelength of difference frequency waves, phase matching angle, poling period of PPLT and working temperature are theoretically analyzed. The parametric gain coefficient in the low-loss limit and the absorption coefficient of the THz wave during the DFG process in the vicinity of polariton resonances are numerically analyzed. A THz wave can be efficiently generated by utilizing the giant second order nonlinearities of $LiTaO_3$ in the vicinity of polariton resonances.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.196-202
• /
• 2021

DNA sequencing provides fundamental data in genomics, bioinformatics, biology and many other research areas. With the emergent evolution in DNA sequencing technology, a massive amount of genomic data is produced every day, mainly DNA sequences, craving for more storage and bandwidth. Unfortunately, managing, analyzing and specifically storing these large amounts of data become a major scientific challenge for bioinformatics. Those large volumes of data also require a fast transmission, effective storage, superior functionality and provision of quick access to any record. Data storage costs have a considerable proportion of total cost in the formation and analysis of DNA sequences. In particular, there is a need of highly control of disk storage capacity of DNA sequences but the standard compression techniques unsuccessful to compress these sequences. Several specialized techniques were introduced for this purpose. Therefore, to overcome all these above challenges, lossless compression techniques have become necessary. In this paper, it is described a new DNA compression mechanism of pattern matching extended Compression algorithm that read the input sequence as segments and find the matching pattern and store it in a permanent or temporary table based on number of bases. The remaining unmatched sequence is been converted into the binary form and then it is been grouped into binary bits i.e. of seven bits and gain these bits are been converted into an ASCII form. Finally, the proposed algorithm dynamically calculates the compression ratio. Thus the results show that pattern matching extended Compression algorithm outperforms cutting-edge compressors and proves its efficiency in terms of compression ratio regardless of the file size of the data.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.418-423
• /
• 2004

The motion estimation algorithm based block matching is a widely used in the international standards related to video compression, such as the MPEG series and H.26x series. Full search algorithm(FA) ones of this block matching algorithms is usually impractical because of the large number of computations required for large search region. Fast search algorithms and conventional binary block matching algorithms reduce computational complexity and data processing time but this algorithms have disadvantages that is less performance than full search algorithm. This paper presents new Boolean matching algorithm, called BCBM(Bit Converted Boolean Matching). Proposed algorithm has performance closed to the FA by Boolean only block matching that may be very efficiently implemented in hardware for real time video communication. Simulation results show that the PSNR of the proposed algorithm is about 0.08㏈ loss than FA but is about 0.96∼2.02㏈ gain than fast search algorithm and conventional Boolean matching algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.110-116
• /
• 2014

Pattern matching algorithms are widely used in computer security systems such as computer networks, ubiquitous networks, sensor networks, and so on. However, the advances in information technology causes grow on the amount of data and increase on the computation complexity of pattern matching processes. Therefore, there is a strong demand for a novel high performance pattern matching algorithms. In light of this fact, this paper newly proposes a suffix tree based pattern matching algorithm. The suffix tree is constructed based on the suffix values of all patterns. Then, the shift nodes which informs how many characters can be skipped without matching operations are added to the suffix tree in order to boost matching performance. The proposed algorithm reduces memory usage on the suffix tree and the amount of matching operations by the shift nodes. From the performance evaluation, our algorithm achieved 24% performance gain compared with the traditional algorithm named as Wu-Manber.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.664-672
• /
• 2009

In this paper we propose an on-glass antenna which consists of conducting dual center striplines and multi-loaded striplines. Multi-loaded striplines and dual center lines were employed for achieving a broad matching bandwidth and improving a vertical radiation gain, respectively. The detail design parameters were determined using the Pareto genetic algorithm with an full wave EM simulator. The optimized design was built and installed on a commercial vehicle, and the antenna performances such as the return loss and the radiation gain were measured in a semi-anechoic chamber. The measurement results showed the matching bandwidth($S_{11}$<-3 dB) of about 49 % in the T-DMB frequency band, the vertical gain of about -3 dBi along the bore-sight direction, and the average gain of about -10 dBi along the azimuth direction.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.261-268
• /
• 2018

Stimulated polariton scattering (SPS) from the $A_1$ transverse optical (TO) modes of $BaTiO_3$ bulk crystal generating a terahertz (THz) wave with the noncollinear phase-matching (NPM) condition is theoretically investigated. To our best knowledge, this is the first report on THz wave generation from $BaTiO_3$ bulk crystal via SPS. Phase-matching (PM) characteristics in the NPM configuration are analyzed. Effective parametric gain lengths for the Stokes and THz waves in the NPM configuration are calculated. The effective parametric gain coefficient and absorption coefficient of the THz wave in $BaTiO_3$ are theoretically simulated. The THz phonon flux densities generated via SPS in $BaTiO_3$ are theoretically calculated by solving the coupled wave equations under the NPM condition. The PM characteristics and THz-wave parametric gain characteristics in $BaTiO_3$ are compared to those in $MgO:LiNbO_3$. The results of the analysis indicate that $BaTiO_3$ is an attractive optical crystal for efficient THz wave generation via SPS.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.819-822
• /
• 2004

To transmit MPEG-2 video on an erroneous channel, a number of error control techniques He needed. Especially, error concealment techniques which can be implemented on receivers independent of transmitters are essential to obtain good video quality. In this paper, a motion adaptive boundary matching algorithm (MA-BMA) is presented for temporal error concealment. Before carrying out BMA, we perform error concealmmt by a motion vector prediction using neighboring motion vectors. If the candidate of error concealment is rot satisfied, search range and reliable boundary pixels are selected by the motion activity or motion vectors ane a damaged macroblock is concealed by applying the MA-BMA. This error concealment technique reduces the complexity and maintains PSNR gain of 0.3 0.7dB compared to the conventional BMA.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.941-944
• /
• 2005

In this paper, the analysis of input power matching for CMOS RF Low Noise Amplifier (LNA) design is introduced. With two input power matching techniques, the performance of LNAs is estimated according to gain and noise figure. This process can be expressed easily by theoretical method and using simulation. These analytical methods are useful in that they can provide enough insights for designing CMOS RF LNAs.