• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.856-860
• /
• 2007

This paper presents a robust tracking controller design method for the track-following system of an optical recording device. A tracking loop gain adjustment algorithm is introduced to accurately estimate the tracking vibration quantity in spite of the uncertainties of the tracking actuator. A minimum tracking open-loop gain is calculated by the estimated tracking vibration quantity and a tolerable limit of tracking error. A robust tracking controller is designed by considering a robust $H_\infty$ control problem with the weighting function of a slightly larger gain than the minimum tracking open-loop gain. The proposed controller design method is applied to the track-following system of an optical recording device and is evaluated through the experimental result.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.76-86
• /
• 2022

Personal hearing devices, such as hearing aids, may be fine-tuned by allowing the users to conduct self-adjustment. Two self-adjustment procedures were developed to collect the listener preferred gains in six octave-frequency bands from 0.25 kHz to 8 kHz. These procedures were designed to allow rapid exploration of a multi-dimensional parameter space using a simple, one-dimensional user control interface (i.e., a programmable knob). The two procedures differ in whether the user interface controls the gains in all frequency bands simultaneously (Procedure A) or only the gain in one frequency band (Procedure B) on a given trial. Monte-Carlo simulations suggested that for both procedures the gain preference identified by simulated listeners rapidly converged to the ground-truth preferred gain profile over the first 20 trials. Initial behavioral evaluations of the self-adjustment procedures, in terms of test-retest reliability, were conducted using 20 young, normal-hearing listeners. Each estimate of the preferred gain profile took less than 20 minutes. The deviation between two separate estimates of the preferred gain profile, conducted at least a week apart, was about 10 dB ~ 15 dB.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.5 s.98
• /
• pp.578-585
• /
• 2005

In this paper, we present a schematic method estimating the tracking vibration quantity occurring in the track-following system of an optical recording device. A tracking loop gain adjustment algorithm is introduced to estimate accurately the tracking vibration quantity in spite of the uncertainties of the tracking actuator, Accordingly, the tracking vibration quantity can be estimated from the tracking error, the controller output, the nominal actuator model, and a compensated gain. An optimal tracking controller can be designed from a minimum tracking open-loop gain calculated by the estimated tracking vibration quantity The proposed vibration quantity estimation and controller design method are applied to the track-following system of an optical recording device and are evaluated through the experimental result.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.275-284
• /
• 2014

This study verifies the influence of students' stress of their adjustment to school life and the mediate effect of social support and based on the results, to develop the programs improving the school life adaptation. For the purpose, the researcher collects some data from junior high school students in Gyeongnam area. The study results were as follows. First, it appeared that the school stress has a negative effect on the school support. that is, the study notice that juveniles with high stress gain low social support Second, it appeared that the social support has a positive effect on the school adjustment, that is, the study notice that juveniles with high social support gain high social adjustment. Third, it appeared that the school stress has a negative effect on the school adjustment. that is, the study notice that juveniles with high stress gain low social support. Fourth, the result to verify the mediate effect of social support, in the long run, that depending on the social support, juveniles' stress has the full mediate effect on their adjustment to school life. That is, the study confirms that juveniles with high stress gain low social support and juveniles with stress it appeared that the school stress has a indirectly effect on the school adjustment.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.4
• /
• pp.195-202
• /
• 2002

The high performance position controller named 'Unified PID Position Controller'is presented in part 1 of this paper. In part 2, we provide smart gain adjustment methods including the freedom utilizations for rare sensitivity toward the system parameter variation and for increasing the stiffness of the system. Owing to the provided gain tuning strategy, the overall system characteristics can be stabilized without over-shoot phenomena when the system parameter is changed in the rate of from 0.5 to 2∼4. Moreover, for the actual feasibility to the industrial fields, a simple butt effective anti-windup strategy prohibiting the integral component of the PID position controller from saturation is presented too. All of the presented algorithms are verified through the experiment works with commercial linear motor.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.9
• /
• pp.805-812
• /
• 2007

This paper present a robust controller design method based on the estimation of velocity disturbance to construct a robust fine seek control system. A loop gain adjustment algorithm is introduced to accurately estimate the velocity disturbance in spite of the uncertainties of fine actuator. A weighting function is optimally selected from a minimum fine seek open-loop gain, calculated by estimating the velocity disturbance. A robust fine seek controller is designed by considering a robust $H_{\infty}$ control problem using the weighting function. The proposed controller design method is applied to the fine seek control system of a DVD rewritable drive and is evaluated through the experimental results.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.3
• /
• pp.243-250
• /
• 2007

This paper presents a systematic method of estimating a velocity disturbance occurring in the fine seek control system of an optical disk drive. A fine seek loop gain adjustment algorithm is introduced to accurately estimate the velocity disturbance in spite of the uncertainties of the fine actuator. The velocity disturbance can be estimated from a measurable velocity, a fine seek controller output, and a compensated fine actuator model. A robust fine seek controller can be designed by considering a minimum fine seek open-loop gain, calculated by the estimated velocity disturbance. The proposed controller design method is applied to the fine seek control system of a DVD rewritable drive and is evaluated through the experimental results.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.207-212
• /
• 2001

In this paper, a method to be able to decide the possible maximum gain of P, PI control for the retarded processes under stable condition is proposed. At first, adjustable parameter set causing stability limit are obtained based on the frequency domain condition which makes the roots of transfer function locate on the $j\omega$ axis. And the cut-in frequency $\omega{_p}$ to bring the parameter set to P control from PI control is derived by an equation with 2 parameters L and $T_m$ given, then $\omega{_p}$ is used to compute the maximum gain with stable condition. For the calculation, the controlled process of first order system with time delay element is introduced and all parameters are presumed to be time invariant.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.413-416
• /
• 1998

Sensitivity and calibration considerations are most important in the design and implementation of real control systems. Ideally parameter changes due to various causes should not appreciably affect the system's performances. But all the values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. In this paper, we propose a digital controller which has the capability of calibration and gain adjustment as well as the execution of control law. Specifically the problems of gain adjustment and offset calibration in the light source and CdS sensor module for position measurement in a flexible link system are considerably resolved. The parameters of measurement module are prone to change due to environmental brightness conditions resulting in poor steady state performance of the overall control system. Thus a proper method is necessary to provide correction to the changed values of gain and offset in the position measurement module. The proposed controller, whenever necessary, measures the open-loop characteristics, andthen calculates the offset and sensor gain correction values based on the prepared standard measurements. It is applied to the control of a flexible link system with the gain and offset calibration porblems in the light sensor module for position to show the applicability.

• Publications of The Korean Astronomical Society
• /
• v.29 no.3
• /
• pp.53-58
• /
• 2014

We improved the antenna efficiency of the Taeduk Radio Astronomy Observatory (TRAO) 13.7-m radio telescope by adjusting the antenna panels based on digital photogrammetric measurements. First of all, we measured the surface accuracy of the main reflector of this antenna at three elevation angles of $35^{\circ}$, $45^{\circ}$, and $60^{\circ}$. We performed a total of four sets of the photogrammetric measurements and panel adjustments. When adjusting the panels, we positioned the antenna to the zenith and applied the measured data sets at the elevation of $45^{\circ}$. We found that the antenna surface accuracy has been improved by a factor of ~ 3 times after the final adjustment in comparison with the value before the adjustments. And we also found that the antenna surface accuracy tended to be slightly better at the elevation angles of $35^{\circ}$ and $60^{\circ}$ than that at the elevation angle of $45^{\circ}$. After the final panel adjustment, the aperture and beam efficiencies of the telescope have has been improved from 35% to 44%, and from 41% to 51%, respectively.