• 한국가스학회지
• /
• 제9권3호
• /
• pp.27-31
• /
• 2005

LNG 저장탱크 내부에 설치되는 멤브레인은 LNG 저장시 발생하는 온도와 압력의 하중변화에 따른 열수축과 팽창을 주름에서 흡수하도록 설계 되어있다 따라서 멤브레인 주름부의 변형률 측정을 통한 성능평가가 중요하며 이를 위해 유한요소해석 및 실험을 수행한다. 스트레인 게이지를 이용한 응력측정 시스템을 구축하여 운전 상태에서 멤브레인 주름 거동을 파악하기 위하여 변형률을 측정하였다. 일부 측정값을 유한요소해석에 의해 구한 결과와 비교하여 KOGAS 멤브레인의 특성을 검토하였다.

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.627-638
• /
• 2017

항공기에 탑재된 레이더 장비는 무작위진동 환경에 장기간 노출되어, 설계 시 피로수명 예측이 중요한 요소로 고려된다. 피로수명을 예측하는 방법 중 주파수영역 피로해석 방법이 지속적으로 제안되고 있다. 본 논문은 많이 사용되는 4가지의 주파수영역 피로해석 방법을 선정하여, 시편 피로시험 결과와 비교하였다. Strain gage를 이용한 시편 피로시험을 통해 시간영역 피로해석과 주파수영역 피로해석 방법을 비교한 결과, Dirlik과 Benasciutti-Tovo방법이 주파수영역 피로해석법 중 시간영역 피로해석법과 잘 일치하였다. 시편 피로시험 결과를 토대로 Dirlik과 Benasciutti-Tovo방법과 유한요소모델을 이용하여 항공기 탑재 장비의 피로해석을 수행하였으며, 요구수명이 만족함을 확인하였다.

• 대한한의진단학회지
• /
• 제9권2호
• /
• pp.123-144
• /
• 2005

Objectives: Pulse-Respiration Ratio has been used for estimating subject's Han-Yeol [寒熱] status since it mentioned in suwen [素問]. In practicing Pulse-Respiration Ratio over 5 means the status of Yeol [熱], Pulse-Respiration Ratio below 3 means the status of Han [寒]. We performed this study to examine the Optimum Standard for Measuring Pulse-Respiration Ratio on the Basis of Repeatability and Reproducibility. Methods: After subject's 5 minutes rest we measured subject's ECG, respiration pattern, EEG, EMG simultaneously. In this research examiner's number is two, subject's number is four, and the number of repeat is two. We calculated Pulse-Respiration Ratio through dividing Respiration cycle average by Pulse cycle average according to each standard including time section, $EEG(relative-{\alpha}$ density, $relative-{\beta}$ density, ${\alpha}/{\beta}$ and EMG. We analyzed these data through Gage R&R study using MINITAB 13.20 program and considered the results of below 30 %R&R and over 4 Number of Distinct Categories to have a significance. Results: 1. In the applying of time standard, Pulse-Respiration Ratio from section 3, 4, 6, 8 had a significant meaning in the aspect of Repeatability and Reproducibility. 2. In the applying of $EEG({\alpha}$ I , ${\beta}$ I , ${\alpha}/{\beta})$, EMG(E I) standard, there was no significant results. 3. In the applying of time standard(section 5, 6, 7), $EEG({\alpha}$ I , ${\beta}$ I , ${\alpha}/{\beta})$ and EMG(E I) standard simultaneously, Pulse-Respiration Ratio from ${\alpha}/{\beta}$ in section 6, ${\beta}$ I in section 8 had a significant meaning in the aspect of Repeatability and Reproducibility. Conclusions: We can suggest the Optimum Standard for Measuring Pulse-Respiration Ratio on the basis of Repeatability and Reproducibility as followings; 1. Pulse-Respiration Ratio Measuring time should be at least 15 minutes. 2. Applying of time(section 6, 8) and $EEG({\beta}$ I, ${\alpha}/{\beta})$ standard simultaneously is recommended considering reliability and validity but more study is needed. 3. EMG(E I) may be helpful to detect the segment of physical rest and exclude artifacts but more study is needed.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.607-616
• /
• 2014

Purpose: This paper reviews popular measurement system indices and proposes a procedure for assessing a measurement system using two parameters with intraclass correlation and a factor for process capability. Methods: Gage Repeatability and Reproducibility(GR&R), precision-to-tolerance ratio(PTR), number of distinct categories, producer's and consumer's risks are employed to assess the measurement capabilities and discuss the relationships between measurement system metrics. Results: Two-dimensional plot by two parameters is presented to assess adequacy of the measurement system and process capability. A numerical example and previously studied case study are provided for illustration. Conclusion: The procedure proposed in this paper using two-dimension parameters provides a valuable procedure and helpful guidelines to quality and production managers in assessing the capabilities of a measurement system and choosing the needed actions to be the most benefit.

• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.208-214
• /
• 1986

본 연구에서는 균열 닫힘에 관한 연구의 일환으로 5083-O 알루미늄합금을 사용하고 소규모강복조건하에서 일정진폭하중피로시험을 시행하여 이 재료의 피로균열 진전속도와 균열닫힘에 관하여 검토하였다.

• 대한한의진단학회지
• /
• 제10권1호
• /
• pp.78-97
• /
• 2006

Background: There was seldom study about method that estimate expertness of pulse diagnosis in 8 Constitution Medicine in spite of the diagnostician importance in 8 Constitution Medicine Objectives: This study is to evaluate diagnostician's consistency and accuracy about pulse diagnosis in 8 Constitution Medicine using Cage R&R study. Methods: The subjects were comprised of 28 volunteers. Among theme, 3 diagnosticians and 10 participants were chosen through questionnaire. Diagnosticians diagnosed participant's Constitution by pulse diagnosis in 8 Constitution Medicine with hiding their eyes by eyepatch. MINITAB statistical software(ver. 13.20) was used for statistical analysis: Attribute Cage R&R study was used to verify the results. Results: 1. In the measurements of consistency, diagnostician b(agreement=80%, Value of k=0.8276)was very good, diagnostician a(agreement=70%, Value of k=0.7465) was good, and diagnostician c(agreement=50%, Value of k=0.5365) was moderate. 2. In the measurements of accuracy, diagnostician b(agreement =70%, Value of t=0.6812) was good, diagnostician a(agreement=60%. Value of t=0.6414) was good, and diagno-stician c(agreement=0%, Value of k=-0.1000) was poor. 3. In cofidence of diagnosis, diagnostician c was 75%, diagnostician a was 70%, and diagnostician b was 64%. Conclusion: The results suggest that diagnostician's consistency and accuracy about pulse diagnosis in 8 Constitution Medicine can be evaluated by Cage R&R study. further study is needed for estimation method of pulse diagnosis in 8 Constitution Medicine.

• Journal of the Korean Data and Information Science Society
• /
• 제18권2호
• /
• pp.457-469
• /
• 2007

Process Capability Indexes(PCI) are used as the measure for evaluation of process capability analysis and is the statistical method for efficient process control. The fourth generation $PCI(C_{psk})$ is constructed from $C_{pmk}$ by introducing the factor $\mid\mu-T\mid$ in the numerator as an extra penalty for the departure of the process mean from the preassigned target value T And Process Incapability Indexes(PII) are presented by inversing PCI and include the information of PCI. This paper introduces the PII $C_{ss}^*$ provide manager with various information of process and include Gage R&R. PII $C_{ss}^*$ is presented by inversing PCI $C_{psk}$ and include the information of PCI $C_{psk}$.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.117-126
• /
• 2009

We develop methods for propagating and analyzing EPCI(Extended Process Capability Index) by using the error type that classifies into accuracy and precision. EPCI developed in this study can be applied to the three combined processes that consist of production, measurement and calibration. Little calibration work discusses while a great deal has been studied about SPC(Statistical Process Contol) and MSA(Measurement System Analysis). EPCI can be decomposed into three indexes such as PPCI(Production Process Capability Index), PPPI(Production Process Performance Index), MPCI(Measurement PCD, and CPCI(Calibration PCI). These indexs based on the type of error classification can be used with various statistical techniques and principles such as SPC control charts, ANOVA(Analysis of Variance), MSA Gage R&R, Additivity-of-Variance, and RSSM(Root Sum of Square Method). As the method proposed is simple, any engineer in charge of SPC. MSA and calibration can use efficientily in industries. Numerical examples are presentsed. We recommed that the indexes can be used in conjunction with evaluation criteria.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.365-366
• /
• 2007

Micro jetting drop inspection system is essential to measuring micro drop volume. Measuring pico-liter drop volume is useful for new LCD color filter product process that is based on inkjet printing technology. To upgrade the reliability in drop measurement system, we use the auto focusing & multi drop reiteration & blurring average algorism. First of all we used standard mark for gage R&R in the vision system. Finding the most suitable threshold for multi blurring drop, is the main key of this research. Sensitivity of vision system is a standard in measuring the upgrade system level. So, suitable threshold can upgrade the performance of jetting drop inspection system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.76-81
• /
• 2012

In-process evaluation equipment for the prominent discrete tone (PDT) emitted by small motors or actuators such as HDD(Hard Disk Driver), ODD(Optical Disk Driver) or linear motors has been developed and estimated on the basis of Prominence Ratio (PR) method in ECMA 74. Correlation of the evaluation equipment was performed in comparison with the method by ECMA 74 in anechoic chamber. Coherent function between two systems was applied in order to compensate traceability of ECMA 74 in anechoic chamber. Usability of the developed system with estimated Gage R&R shall be approved with real samples in the mass production line.