• Korean Journal of Medicinal Crop Science
• /
• v.5 no.4
• /
• pp.276-283
• /
• 1997

This experiment was conducted to investigate the optimum temperature and the effects of sulfuric acid, flowing water and $GA_3$ on the germination of Bupleurum falcatum. At the same time, the effect of germination-related compounds in Bupleurum falcatum seed was tested. Among the tested temperatures $(15,\;20,\;25\;and\;30^{\circ}C)$ the highest germination rate was obtained at $15^{\circ}C$. The optimum soaking time of sulfuric acid was 5 minutes at the concentration of both 0.1 and 1.0%. At the same time, the germination rate was highest when Bupleurum falcatum seed was washed for 2 days in the flowing water before germination test. The effect of $GA_3$ on the germination was highest at 100 ppm out of 10, 50 and 100 ppm. Regardless of treatments, the germination rate of Jeongseon species was higher than that of Mishima species. SEM photographs revealed that most of germination-inhibiting substances in the seed coat were washed away by rinsing in the flowing water for 2 days thus the seed coat became more smooth. The 4, 000 ppm alcohol extract of Bupleurum falcatum seeds inhibited the germination of lettuce seeds as much as 41.7% in Jeongseon species and 58.3% in Mishima species. The higher extract concentration from seed of Bupleurum falcatum, the lower the germination of lettuce seeds was obtained. Out of phenolic acids, the contents of orchinol, pyrogallol, and p-hydroxybenzoic acid were highest in both varieties. Compared with Mishima species, Jeongseon species showed much higher content of salicylic and vanillic acid.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.52-57
• /
• 1998

The effects of additives such as zinc compounds in 4M KOH electrolyte of Al-air cell have been studied. Zinc compounds in electrolyte increased hydrogen evolution overpotential and TPC(tripotasium citrate)/CaO formed fine film on aluminum surface, and these additives decreased hydrogen evolution rate and corrosion rate of aluminum. These additives shifted the OCP in the positive direction on high purity aluminum(purity, 99.999%) and in the negative direction on Al No 1050(purity,99.5%). Addition of two or more additives resulted in the prevention or the reduction of corrosion rate and hydrogen evolution at OCP. As the overpotential on Al electrode increased, the hydrogen evolution rate decreased and the utilization of aluminum increased. At high current density$(>100mA/cm^2)$, TPC/CaO/ZnO additives increased the utilization of high purity aluminum up to that of aluminum alloys containing indium, gallium and thallium.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.2
• /
• pp.81-85
• /
• 2014

Ga doped ZnO (GZO)/Al bi-layered films were deposited on the glass substrate by RF and DC magnetron sputtering and then vacuum annealed at different temperatures of 100, 200 and $300^{\circ}C$ for 30 minutes to consider the effects of annealing temperature on the structural, electrical and optical properties of the films. For all depositions, the thicknesses of the GZO and Al films were kept constant at 95 and 5 nm, respectively, by controlling the deposition time. As-deposited GZO/Al bi-layered films showed a relatively low optical transmittance of 62%, while the films annealed at $300^{\circ}C$ showed a higher transmittance of 81%, compared to the other films. In addition, the electrical resistivity of the films was influenced by annealing temperature and the lowest resistivity of $9.8{\times}10^{-4}{\Omega}cm$ was observed in the films annealed at $300^{\circ}C$. Due to the increased carrier mobility, 2.35 $cm^2V^{-1}S^{-1}$ of the films. From the experimental results, it can be concluded that increasing the annealing temperature enhanced the optical and electrical properties of the GZO/Al films.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.406-410
• /
• 2000

Using the hot-wall epitaxy method, we grew a $Hg_{1-x}Cd_xTe$ (MCT) thin film in-situ after growing (111) CdTe of 9 $mu \textrm{m}$ as a buffer layer. The value of FWHM of double crystal x-ray diffraction rocking curve was 125 arcsec and the surface morphology was clean with a small roughness of 10 nm. From measuring the photocurrent of the grown MCT thin film, the maximum peak wavelength and the cut-off wavelength were 1.1050 $\mu\textrm{m}$ (1.1220 eV) and 1.2632 $\mu\textrm{m}$ (0.9815 eV), respectively. This peak wavelength corresponds to the peak of the band gap due to the intrinsic transition of the photoconductor. Therefore, the MCT thin film could be used as the photoconducting detector sensing a near-IR wavelength band from 1.0 to 1.6 $\mu\textrm{m}$.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.66-71
• /
• 2010

In the Joseon Dynasty, various fruit teas were popularized to promote health, with spread of Donguibogam and Hyangyag gugeupbang. As interest in fruit tea has recently increased, studies on its manufacture have become necessary. We used response surface analysis for rediscovery and commercialization of grape tea. Major materials of traditional grape tea are grape juice, pear juice, ginger juice, and honey, and the sugar contents of these materials were 12.3, 14.1, 3.3 and 75 $^{\circ}Brix$, respectively. When sensory examinations were conducted with subjects aged 40-60 years, the difference between dilution ratios of 100% and 150% was not significant, but tea diluted by 150% showed somewhat higher scores than did tea diluted by 100%. Ginger taste and sweetness were found to have the greatest effect on overall acceptance. Regression analysis on color, flavor, taste, and overall acceptance values, with reference to ginger juice and honey as independent variables, revealed that the $R^2$ values were 0.8411, 0.6717, 0.9499, and 0.9015, respectively. Contour maps were superimposed to obtain an optimal combination of ingredients for traditional grape tea, and the indicated levels of ginger juice and honey were 0.46-0.69% and 3.85-5.20%, in combination with grape juice, pear juice, and water concentrations of 28%, 9% and 60% (all w/w), respectively. Thus, it is now possible to prepare traditional grape tea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.94-100
• /
• 1985

M/S Pusan 403(GT 243, 1000ps) was originally built as a research vessel on skipjack pole and line fishing in 1972. She had begun to serve as a fishing training ship of National Fisheries University of Pusan from 1974, since the interior structure has been remodelled and some weight articles have been removed, her stability is in doubt. The authors carried out an inclining experiment by using two pendulums at fore and aft with two weights on both sides. Each value obtained was compared with the IMO safety code for fishing vessels and safety regulation for fishing vessels of Korea. 1. The GZ value, being 0.207 m under light ship condition and 0.325 m under departure condition with full load, can be assumed as no impediment on her stability, 2. Under the light ship condition, GM decreased by 0.046 m and KG increased by 0.141 m, compared with the values determined at the time of official sea trial. Therefore, no impediment on the stability exists. 3. The GM decreased by 0.163 m and the KG increased by 0.173 m, compared with the values determined at the time of official sea trial. In no consideration of the free surface effects of liquid in the oil and fresh water tanks, no impediment on the stability exists. But, in consideration of the free surface effect, it may be regarded that some impediment exists.

• Journal of Adhesion and Interface
• /
• v.24 no.3
• /
• pp.100-104
• /
• 2023

Van der Waals heterostructures have garnered significant attention in recent research due to their excellent electronic characteristics arising from the absence of dangling bonds and the exclusive reliance on Van der Waals forces for interlayer coupling. However, most studies have been confined to fundamental research employing the Scotch tape (mechanical exfoliation) method. We fabricated Van der Waals vertical heterojunction transistors to advance this field using materials exclusively grown via chemical vapor deposition (CVD). CVDgrown graphene was patterned through photolithography to serve as electrodes, while CVD-grown MoSe₂ was employed as the pickup/transfer material, resulting in the realization of Van der Waals heterojunction transistors with interlayer charge transfer effects. The electrical characteristics of the fabricated devices were thoroughly examined. Additionally, we observed variations in the transistor's performance based on the presence of defects in MoSe₂ layer.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.71-75
• /
• 2023

In this study, inorganic perovskite films with different compositions were grown by thermal chemical vapor deposition depending on the substrate and their optical properties were compared. Inorganic perovskite crystals were grown on SiO₂/Si and c-Al₂O₃ substrates using CsBr and PbBr₂, respectively, under the same growth conditions. Cs₄PbBr₆-CsPbBr₃ crystallites were grown on the SiO₂ with polycrystalline structure, while a CsPbBr₃ (100) dominant thin film was formed on the c-Al₂O₃ substrate with single crystal structure. From the photoluminescence measurement, CsPbBr₃ showed typical green emission centered at 534 nm with a full width at half maximum (FWHM) of about 91 meV. The Cs₄PbBr₆-CsPbBr₃ mixed structure exhibits blue-shifted emission at 523 nm with a narrow FWHM of 63 meV and a fast decay time of 6.88 ns. These results are expected to be useful for application in photoelectric devices such as displays, solar cells, and light sensors based on inorganic metal perovskites.