• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.453-461
• /
• 2005

Structural characteristics and successional trends of actual forest vegetation in Youngil soil erosion control district, South Korea, were studied and described by the phytosociological investigations and diameter measurement. And also the incremental growth pattern of the major trees for erosion control analyzed using increment core. Sixty-eight releves were sampled with $100m^2$ plots. Two main vegetation types (Lespedeza bicolor-Miscanthus sinensis-type and Alnus firma-Styrax japonica-type) have been distinguished and typified nine vegetation units. Constancy classes diagram showed that the higher species (${\geq}IV$) have only 2.6% and that most species occurred were rare and had low abundances. The successional trends of the actual forest vegetation would be mostly changed as Quercus serrata forest. Annual diameter growth was 3.0~3.4 mm in case of conifer (Pinus rigida and Pinus thunbergii), and the broad-leaved trees (Alnus firma, Robinia pseudo-acacia, and Alnus hirsuta) showed 4.3~4.9 mm. The incremental growth patterns showed to be decreased rapidly since twenty to twenty-five years regardless of the species of trees.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.100-107
• /
• 2005

As a result of this study, vitality of natural monuments (large trees) looks relatively good but they require continuous management. Also, the management for condition recovery and condition maintenance, and minimum measures are needed at least to avoid natural calamity. Major points induced are as follows : The first, although most of natural monument large trees showed favorable growth environment, most of them are aged and have dense twigs with requirement for weed trimming to remove complicated and unnecessary branches. In addition, as most of large trees grow alone in a large space with potential natural calamity, thus, minimum measures are required at least. Secondly, change in electric resistance in surveyed large trees was relatively favorable, however, large trees with soil covering showed high electric resistance and were found to have low vitality. As shown, this study was conducted to find out the measurement techniques of natural monuments, Basic foundation is suggested through the measurement of electric resistance, and the vitality of natural monuments; more accurate investigation will be remained for further discussion.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.6
• /
• pp.51-62
• /
• 2009

The purpose of this study is to analyze the profitability by selecting Pinus densiflora S. et Z. worthy of ornamental tree from among the cutting timber in the urban development project, and then presents the improvements. The study site is the whole area of Oedong-eup Gyeongju city Gyeongsangbuk-do and subject trees numbers are 2,180 trees. Analysis method is cost analysis because it is used generously pubic land development. In results, at first, in case of forest development currently cutting tree costs 7.3 million Won/ha. and no profit is occurred at all. Secondly, the forward direction order of tree treatments expenses are in sawdust production, selling lumber, selling ornamental tree, and selling ornamental tree, sawdust production, selling lumbered on the aspect of profits by the selling stumpage. Especially, selling trees as ornamental tree costs 127 million Won/ha. which shows the highest profits. Third, the management of ornamental tree pine tree after transplantation from development site costs 5 times less than purchasing the same quality trees. Hence, it is recommended to re-utilize the trees from the development sites to produce a high standard gardens and it also provides the basis for the low carbon green growth society.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.50-54
• /
• 1985

The effect of relations parameters on the declination gradient of trees was studied in natural forest of Quercus variabilis, Quercus ${\times}$ grosseserrata, Quercus aliens, and Quercus dentata grown at various slope gradient. The declination gradients of trees were effected by the species, slope gradient, and direction of slope, but not effected by density and height in all species. The species shows a superior factor effecting declination gradient of trees compared with other relations parameters, and next effective factor was slope gradient. Especially in all of slope gradient, the declination gradient of Quercus ${\times}$ grossesserrata was highest.

• Plant Resources
• /
• v.7 no.1
• /
• pp.77-86
• /
• 2004

The reduced ratio of red:far-red (R:FR) light acts as a measure of the proximity of competitors and plants can detect the potentially competing neighbor plants by perceiving reflected R:FR signals and initiate the response of “shade avoidance” before actual shading occurs. The phytochrome system is responsible for monitoring the changes in the R:FR and initiating the shade avoidance response. The response to low R:FR ratio was studied in a white aspen Populus alba clone ‘Bolleana’ using two filter systems: a clear plastic filter system that allows a R:FR ratio less than 1.0 to pass from adjacent border plant reflection; and a special commercial plastic that blocks FR light and creates a R:FR ratio above 3.0. The reduced R:FR signals enhanced the stem elongation in response to competition at the expense of relative stem diameter growth. Trees grown inside clear chambers were 27 ％ taller than trees grown inside the FR-blocking filter chambers. Stem taper of clear chamber trees was 16％ less than the FR-blocking filter trees. Low R:FR also induced 22％ more stem dry weight and 13％ greater petiole length per leaf compared to the FR-blocking filter trees. There were no statistically significant differences in leaf area, leaf number increment, and total dry weight between the two light filter treatments.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.589-594
• /
• 2002

In computer graphics, L-system is primarily used for the production of such natural shapes as flowers, trees, and grass. It is possible by iteratively applying the theory of multiple-reduction-copy-machine to an arbitrary initial shape. The purpose of this paper is to modify the shape of ordinary L-system trees so that more realistic trees can be generated. Instead of applying simple iterative function system of the L-system, we regard each branch of the trees as a living thing, and endow them with corresponding attributes. Such branch attributes as lifetime, growth speed, shape variation, attraction by environment are known to belong to the attributes of the particle system. We presented modeling methods as hypotheses for each of the attributes based on parameters, iud shown the resulting diverse tree shapes.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.277-285
• /
• 2019

This study was conducted to understand the growth characteristics of Picea jezoensis that was one of representative subalpine species in Korea, in the light of the effects of wind and micro-topography in its habitats on Mt. Deogyu, Korea. The prevailing wind directions were southwest and west at the study sites. We randomly selected P. jezoensis (height ≥ 1.5 m) on windward, intermediate, and leeward slopes and measured diameter at breast height (DBH), height, crown length by 8 directions in upper, middle and lower sectors of the crown. We examined the micro-topography of P. jezoensis stood on and classified it into 3 types: type 1 was mounded and fully exposed to surrounding environments without neighboring trees; type 2 was somewhat wind-protected by surrounding rocks, but no neighboring vegetation; type 3 was on gentle slope or flat where P. jezoensis grew with neighboring trees or shrubs. The ratios of height to DBH, and estimated crown growth to actual crown growth (hereafter crown growth ratio) were compared among the three types of micro-topography on windward, intermediate and leeward sites. The height growth per DBH and crown growth ratio in the upper and middle crowns were the smallest on the windward site, and the highest on the leeward site (p < 0.01). The crown growth ratio on type 1 on the windward site was only 46% of that on type 3 on the leeward site. Although on the same windward slope, trees on type 1 had more deformed crown shapes than that on Type 3, showing asymmetric crown cross-sectional areas. Wind and micro-topography played critical roles on the crown growth of P. jezoensis.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.422-430
• /
• 2014

This study was conducted to investigate growth changes of DBH, height, crown width, volume, stem biomass, and dead trees after thinning treatments with different thinning intensity for Korean white pine (Pinus koraiensis) plantation. First thinning was applied with 29~69% intensity based on number of trees in 19-yearold plantation, and trees were measured three times: right after thinning (19-year-old), 5 years later (24-yearold), 12 years later (29-year-old). In the case of DBH growth, average DBH growth of heavily thinned plots was 19.6~19.9% higher 5 years later, and 13.3~24.7% higher 12 years later, compared to that of unthinned plots. Initial diameter growth rate was higher than late growth rate. The proportion of large pole candidates ($DBH{\geq}25cm$) was 31% in heavily thinned plot while only 2% was shown in unthinned plot. No difference was shown in height growth depending on plots, and average crown width growth in heavily thinned plots was 30.6~33.3% higher, 5 years later, and 35.0~40.0% higher, 12 years later, compared to that of unthinned plots. Average volume growth of individual trees in heavily thinned plots was 39.8~46.8% higher, 5 years later, and 23.0~52.0% higher, 12 years later, compared to unthinned plots. The maximum volume and biomass per unit area were shown in unthinned plot; the volume and biomass 5 and 12 years later after thinning were $133m^3/ha$ (51 kg/ha) and $344m^3/ha$ (132 kg/ha), respectivily. The significant difference appeared in crown width, volume, and biomass depending on thinning intensity. No dead trees occurred in heavily thinned plots for 12 years after thinning, while mortality rate in unthinned plots was 27.9~37.8%. As a result of analyzing annual increment using cores to determine the timing of second thinning, it suggested that second thinning be suitable around 10 years after first thinning.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.281-290
• /
• 2020

The purpose of this study was to determine the optimal planting density for Zelokva serrata plantations. The study sites were located in Gyeongsan (GS) and Sunchang (SC), Korea. One-year-old, bare-root seedlings were planted at densities of 3,000; 5,000; 7,000; and 10,000 trees ha^-1 at the end of March 2015. We measured the root collar diameter and height each September from 2015 to 2019, and then calculated the H/D ratio and stem volume. The root collar diameter and height increased with increased planting density, and the stem volume was significantly higher at 10,000 trees ha^-1 than those at the other planting densities. Planting density did not affect the survival rate or H/D ratio. The root collar diameter, height, and stem volume were higher in GS than those in SC five years after planting. This study highlights that early growth performance was improved at increased planting densities at both sites. This study suggests that the initial planting density of 10,000 trees ha^-1 is suitable to improve the early growth performance of Z. serrata plantations, and that the improved growth performance at higher planting densities may be a silvicultural characteristic of Z. serrata.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.3
• /
• pp.19-31
• /
• 2017

Plants are the basis for sustainable green growth, and the value of existence and importance of trees including landscape Plants can't be emphasized enough. Therefore, they are precious living things thriving in all sorts of public services, and continuous civil complaints for justifiable compensation of landscape Plants are filed. First, the standard formula of planting intervals according to production target specifications is calculated using root-collar caliper and diameter at breast height, and apply (1) standard medium sized trees which have not yet reached commercialization [deciduous tree production goal (R(B) less than 6cm]= (target standard)= [target standard $R(cm){\times}15{\times}0.7$]. (2) In case of commercialization(R6~R10)= [target standard $R(cm){\times}15{\pm}5%$], (3) In case of more than R12= [target standard $R(cm){\times}15{\times}130%$] shall be applied. In case of using diameter at breast height (4) In case of commercialization(B6~B10)= [target standard $B(cm){\times}20{\times}15{\pm}5%$], (5) In case of more than B12= [target standard $B(cm){\times}20{\times}130%$] shall be applied. Second, appraisal methods based on tree classification of compensation for loss are classified according to planted locations. (1) landscape trees within a house=[price of arrival at the site+planting cost], (2) landscape trees in places such as arboretum=[management technology of tress + relocation expenses considering scarcity of the trees (3) landscape trees in a place of loads= [landscape tree production cost + work out added price. In case of producted landscape threes (4) landscape trees ready to be commercialized as sales loss.