• Title/Summary/Keyword: GPS Data Processing

Search Result 374, Processing Time 0.031 seconds

Design and Implementation of Fault Recorder for Transmission Line Protection (송전선로 보호용 고장기록장치의 설계 및 구현)

  • Choi, Soon-Choul;Park, Chul-Won
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.30 no.3
    • /
    • pp.46-52
    • /
    • 2016
  • When a fault occurs on a transmission line, it is important to identify the fault location as speedily as possible for improvement of the power supply reliability. Generally, distance to fault location is estimated by off line from the recorded data. Conventional fault recorder uses the fault data at one end. This paper deals with the design of an advanced fault recorder for enhancement accuracy of the fault distance estimation and fast detection a fault occurrence position. The major emphasis of the paper will be on the description of the hardware and software of the fault recorder. The fault locator algorithm utilizes a GPS time-synchronized the fault data at both ends. The fault data is transmitted to the other side substation through communication. The advanced fault locator includes a Power module, MPU(Main Processing Unit) module, ADPU(Analog Digital Processing Unit) module, and SIU(Signal Interface Unit) modules. The MMI firmware and software of an advanced fault recording device was implemented.

The Characteristic Analysis of Precipitable Water Vapor According to GPS Observation Baseline Determination (GPS 관측소 기선 처리에 따른 가강수량 특성 분석)

  • Lim, Yun-Kyu;Han, Sang-Ok;Jung, Sueng-Pil;Seong, Ji-Hye
    • Journal of the Korean earth science society
    • /
    • v.34 no.7
    • /
    • pp.626-632
    • /
    • 2013
  • In this study the GPS Precipitable Water Vapor (PWV) was derived and evaluated by a radiosode measure during the winter intensive observation in Gangneung site from January 5 till February 29 in 2012. Bernise 5.0 software was used to derive the GPS data. GPS-derived PWV from Zero difference (GANG) and Single difference (GANG and DAEJ) was high variance in time and about 5 times the PWV of radiosonde. GPS post-processing has been performed from two additional IGS site (Xian Dao, Ibaraki-ken) in order to correct the absolute troposphere errors. As a result, the mean bias error (MBE) and root mean square error (RMSE) and correlation compared with radiosonde measure were 0.67 mm, 6.40 mm, and 0.93, respectively. In order to correct the relative troposphere errors from the altitudinal difference between the two GPS receivers, we calculated the GPS-derived PWV by adding the data of GPS that was installed in Gangneung-Wonju University near the Gangwon Regional Meteorological Administration. In the end, the improved result showed that MBE, RMSE and correlation in comparison with radiosonde measures were 0.61 mm, 5.79 mm, and 0.93, respectively.

Surface deformation monitoring of Augustine volcano, Alaska using GPS measurement - A case study of the 2006 eruption - (GPS를 이용한 미국 알래스카 어거스틴 화산의 지표변위 감시 - 2006년 분화를 중심으로 -)

  • Kim, Su-Kyung;Hwang, Eui-Hong;Kim, Young-Hwa;Lee, Chang-Wook
    • Korean Journal of Remote Sensing
    • /
    • v.29 no.5
    • /
    • pp.545-554
    • /
    • 2013
  • Augustine is an active stratovolcano located in southwest of Cook Inlet, about 290 kilometers southwest of Anchorage, Alaska. Between January 11 and 28, 2006, the volcano erupted explosively 14 times. We collected twelve permanent GPS stations operating by Plate Boundary Observatory (PBO) from 2005 to 2011. All data processing was carried out using Bernese GPS Software V5.0 with IGS precise orbit. Static baseline processing by fixing AC59 station was applied for the volcano activity monitoring. AC59 is the nearest (about 24.5 km) station to Augustine volcano, and located on North America Plate including Augustine Island. The test results show inflation (9.7 cm/yr) and deflation (-9.2 cm/yr) of volcano before and after eruption around crater clearly. After volcano activity has reached a plateau, some of the GPS stations installed north of the volcano show ground subsidence phenomenon caused by compaction of pyroclastic flows. These results indicate the possibility of using surface deformation observed by GPS for monitoring and prediction of volcano activity.

Plane Position Accuracy Analysis of Extracted Data from LiDAR (LiDAR 추출 자료의 평면위치 정확도 분석)

  • Yoon Hee-Cheon;Park Joung-Hyun;Lee Chang-Bok;Kang Joon-Mook
    • Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
    • /
    • 2006.04a
    • /
    • pp.119-124
    • /
    • 2006
  • The world which based on knowledge and information is changing significantly. In the various knowledge and information, the importance of GSIS has increased for efficient application and management of country. The Geomatics has made a change rapidly, observation methods have improved too. The existing acquisition of Geoinformation depend on aerial photogtaphs, but new technology Jike application of high resolution satellite images. SAR and LiDAR, is the fastest. especially, LiDAR surveying is most advanced active observation technology and Geoinfomtation is acquired by reflection of its laser pulse. In this study. the position accuracy of extracted building from LiDAR was evaluated by GPS surveying, then each data was made comparison between LiDAR's and GPS's data. After processing. the result of this study will be suggested basic data about application.

  • PDF

Principal Component Analysis of GPS Height Time Series from 14 Permanent GPS Stations Operated by National Geographic Information Institute (주성분분석을 통한 국토지리정보원 14개 GPS 상시관측소 수직좌표 시계열 분석)

  • Kim, Kyeong-Hui;Park, Kwan-Dong
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.28 no.3
    • /
    • pp.361-367
    • /
    • 2010
  • We produced continuous vertical time series of 14 permanent GPS stations operated by National Geographic Information Institute by processing about five years of data. Then we computed the height velocities by using a linear regression fitting of those time series, and did principal component analysis to understand the overall characteristics of the series. The prominent signal obtained as the first mode of PCA results showed an average of 4.2 mm/yr vertical velocity. The values of the first mode eigenvectors were consistent at all sites. Thus, we concluded that all the 14 stations are uplifting nearly at the same velocity for the test period. Then changes of precision before and after removing the first mode signal from the 14 height time series were analyzed. As a result, the precision improved 34.8% on average.

The Implementation of User Image Recognition based on Embedded Linux (임베디드 리눅스 기반의 사용자 영상인식시스템 구현)

  • Park, Chang-Hee;Kang, Jin-Suk;Ko, Suk-Man;Kim, Jang-Hyung
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.11 no.2
    • /
    • pp.239-247
    • /
    • 2007
  • In this paper, we propose a system that the Linux is ported in embedded system with peripheral devices of CIS(CMOS Image Sensor) and GPS module. The system acquires GGA sentence from GPS module by recognizing camera and GPS is used module in Linux kernel. And then the received location information is used to include still image acquired through CIS According to this paper, We compose hardware for embedded system, attach board (including camera), port Linux BootLoader and Kernel. And. then we realize that it insert kernel in CIS control device driver and GPS module device driver.

Impact of Multi-GNSS Measurements on Baseline Processing for Control Surveying Applications

  • Pawar, Komal Narayan;Yun, Seonghyeon;Lee, Hungkyu;Nguyen, Dinh Huy
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.10 no.2
    • /
    • pp.103-111
    • /
    • 2021
  • A series of experiments have been carried out by using National Geographic Information Institute(NGII)'s Continuously Operating Reference Station (CORS) data with various strategies to analyze the impact of multi-GNSS measurements on baseline processing. The results of baseline processing were compared in terms of ambiguity fixing rate, precision, and hypothesis tests were conducted to confirm the statistical difference. The combination of multi-GNSS measurements has helped to improve ambiguity fixing rate, especially under harsh positioning environments. Combination of GPS, Galileo, BeiDou could get better precision than that of GPS, GLONASS, Galileo, and adding QZSS made the baseline solution's vertical component more precisely. The hypothesis tests have statistically confirmed that the inclusion of the multi-GNSS in the baseline processing enables not only to reduce field observation time length but also to enhance the solution's precision. However, it is of interest to notice that results of the baseline solution are dependent upon the software used. Hence, comprehensive studies should be performed shortly to derive the best practice to select the appropriate software.

Implement integrated vehicle state and video recorder system with OBD-II and MOST network (OBD-II 와 MOST를 이용한 통합형 자동차 상태 및 영상 저장 시스템 구현)

  • Baek, Sung-Hyun;Jang, Jong-Wook
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.12 no.4
    • /
    • pp.303-308
    • /
    • 2011
  • Vehicle black boxes that have similar functions as airplane black boxes are currently being used due to the loss of many lives and properties arising from vehicle accidents. Both black-box products and Event Data Recorder(EDR) systems are currently available in the market. Most of the existing in-vehicle black boxes, however, record only external videos and images and cannot show the vehicle's driving status, whereas EDR products record only the driving status and not external videos. To address the problem of black boxes that can record only videos and images and that of EDR systems that can record only driving data, an integrated vehicle state and video recording system that uses MOST(Media-oriented System Transport) and OBD-II(Onboard Diagnostics II) and CAM (camera) and GPS (global positioning system).

Development of Monitoring Program Based an Automotive GPS/DR Integrated Navigation System for Lane Departure Warning (차선이탈경보를 위한 차량용 GPS/DR 통합항법시스템 기반의 모니터링 프로그램 개발)

  • Park, Soon-Chul;Chun, Se-Bum;Kim, Jeong-Won;Heo, Moon-Beom
    • Journal of Advanced Navigation Technology
    • /
    • v.14 no.6
    • /
    • pp.791-799
    • /
    • 2010
  • In this paper, integrated navigation algorithm is designed for land transport sector which is needed high accuracy and monitoring program is developed for lane departure warning. High accuracy position information which is possible lane separation is needed for lane departure warning, so position detection algorithm based GPS/DR which combine GPS with dead reckoning is proposed. For the verification of the designed integrated navigation algorithm, we drived to acquire data and showed post-processing experiment results with monitoring program. Vehicle driving movie and aerial photograph in monitoring program is designed to show lane keeping and lane separation.

Development of Precise Point Positioning Method Using Global Positioning System Measurements

  • Choi, Byung-Kyu;Back, Jeong-Ho;Cho, Sung-Ki;Park, Jong-Uk;Park, Pil-Ho
    • Journal of Astronomy and Space Sciences
    • /
    • v.28 no.3
    • /
    • pp.217-223
    • /
    • 2011
  • Precise point positioning (PPP) is increasingly used in several parts such as monitoring of crustal movement and maintaining an international terrestrial reference frame using global positioning system (GPS) measurements. An accuracy of PPP data processing has been increased due to the use of the more precise satellite orbit/clock products. In this study we developed PPP algorithm that utilizes data collected by a GPS receiver. The measurement error modelling including the tropospheric error and the tidal model in data processing was considered to improve the positioning accuracy. The extended Kalman filter has been also employed to estimate the state parameters such as positioning information and float ambiguities. For the verification, we compared our results to other of International GNSS Service analysis center. As a result, the mean errors of the estimated position on the East-West, North-South and Up-Down direction for the five days were 0.9 cm, 0.32 cm, and 1.14 cm in 95% confidence level.