• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.121-127
• /
• 2000

Kinematic GPS surveying which can obtain much 3D topographical information through short-time measurement is being utilized mainly in the short baseline less than a few kilometers. Because the decision of position for the long baseline depends on the static GPS surveying which needs long time measurement, the method for measuring the position of long baseline is needed. In this study, the accuracy of the baseline according to the baseline distance, ephemeris, and observation time by GPS surveying is analysed to confirm the application of kinematic GPS surveying for the long baseline. As the result of this, the acquisition of 3D topographical information by GPS surveying in a few minutes will be possible when PDOP is less than 4, and the fast precise ephemeris is used within 60 km. Also, the accuracy is similar to that of final precise ephemeris of IGS. If a lot of studies about the long baseline kinematic GPS surveying are processed, the acquisition of topographical information for various industry including land development will be obtained more efficiently.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.65-70
• /
• 2011

National Geographic Information Institute provides VRS service using permanent GPS networks. VRS-RTK(Virtual Reference System-Real Time Kinematic)GPS surveying which enable to accomplish the real time-based GPS surveying has been increasingly popular. However the positioning accuracy tends to deteriorate as the distance between the rover and base station increases in the VRS-RTK GPS surveying. To analysis this problem in this study, the accuracy of VRS-RTK data was analyzed with 2 different test sites of Geoje city, Gyeongnam province within and without the permanent GPS networks in order to accomplish the cadastral supplementary control surveying. As a result of surveying accuracy analysis at two test sites, positioning errors were ${\pm}0.03m$(RMSE) in both sites. The result was that within the tolerance specified in cadastral surveying law, and indicated the possibility of VRS-RTK GPS surveying in cadastral surveying.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.37-42
• /
• 2009

The accuracy of RTK GPS is limited by the distance dependent errors from orbit, ionosphere and troposphere, as the distance between the rover and the base station increases in the Real Time Kinematic surveying. To solve this problem, VRS system has installed. This study would estimated the accuracy of cadastral detail surveying, which is used on the VRS RTK instead of Total Station and RTK GPS demand for various equipments and time. As a result of study, the positioning accuracy of the VRS RTK and RTK GPS surveying make no greate difference, as RMSE of VRS RTK surveying is 0.144m and that of RTK GPS surveying is 0.146m and the new method would be more efficient.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.373-381
• /
• 2003

This study presents the detailed methods for facilities mapping using GPS and Totalstation. From the control survey by GPS network adjustment, the level of significance fur the height value of fourth order triangulation stations used in this study was estimated about 10cm. According to the result of verification for the transformation coefficients of national coordinate, which were announced by the National Geographic Information Institute, RMSE f coordinate transformation was found out as $\pm$0.546m that can be applied to a map scale less than 1/10,000. The accuracy analysis of height determination by Totalstation for the traverse points spaced average 90m showed that RMSE came out $\pm$9mm on the basis of direct leveling, so it indicated that trigonometric leveling by Totalstation was correct comparatively. The result of accuracy analysis of GPS/RTK surveying on traverse points showed that RMSE came out $\pm$33mm in horizontal location on the basis of Totalstation's outcome and $\pm$15mm in height value on the basis of direct leveling. In the construction survey, GPS/RTK surveying is quicker and more economical than Totalstation surveying in the feasible areas of GPS surveying. but there were many impossible areas for GPS/RTK surveying by the obstacles like a building.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.187-193
• /
• 2006

With the development of technology the Global Positioning System(GPS) measurement method which uses the artificial satellites to locate its position has been adopted in construction projects. Especially in civil engineering projects which have not any base points needed to measure their position they use the GPS measurement method has been put to practical use. But it was still difficult to use that method in building construction sites which require more accurate measurement data than the current GPS measurement method can provide. In this paper we introduce a new GPS measurement method adopted in Burj Dubai project which would be the tallest building in the world after its completion.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.301-309
• /
• 1999

Real-time kinematic (RTK) GPS surveying which allows centimeter level accuracy of three-dimensional coordinates without post-processing has become recognized as a major advance in GPS technology. Employing On-The-Fly initialization technique, the RTK system can escape from cycle slip problems that have affected as a main obstacle factor in traditional kinematic and static approaches. The objective of this research was to evaluate accuracy and effectiveness of the RTK-GPS surveying. First, the continuous RTK observation of a base line was conducted for the purpose of finding out the repeatability of the RTK surveying and the results which were then compared against results from static surveying showed RMS errors of $\pm{3mm}\;and\;\pm{13mm}$ for their respective horizontal and vertical components. On a test network of 30 stations covering the small area, the results of RTK testing were compared against those from not only post-processing kinematic and rapid-static surveyings but conventional surveyings and also the efficiency of RTK were analyzed. In addition, geoid heights which were derived by combination of GPS and spirit leveling about all of the points within the network were compared against those derived by the PNU95 and EGM96 models respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.389-398
• /
• 2002

As the necessity of land information has increased according to development of computer and Information-communication, people have been interested in the satellite measurement system that can update Cadastral and Geographical information rapidly and exactly. Most Cadastral base points which had limitation of measurement technology in the 1910s were less accurate and were destroyed through the Korean War. They also many problems in the process of reinstallation. So, they require the quick and correct method of measurement in re-equipment of a base point and a parcel based survey and so on. This study intends to present the GPS survey direction by understanding and analysing all sorts of problems rising in case of applying the GPS to cadastral area in order to increase the efficiency of the GPS measurement, and also develop the GPS kinematic survey program to apply to the efficiency of a kinematic survey. As a result of research, I could confirm the accuracy of Cadastral base points in Kwangju area by using Korea GPS array and a base point, and could get the result similar to existent cadastral survey result with the coordinate conversion program of Cadastral technology research institute. We however have to pay our attention to the transformation of the plane coordinates because the difference between tens of cm and the existing result can outbreak according to the Gauss conformal double projection method. And, I could figure out the practicality of the developed GPS kinematic survey program, compared with common use program. I expect that it can be applied to the digital cadastral survey and the cadastral map renewal as well.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.431-435
• /
• 2003

GPS측량 방법은 크게 나누어 후처리 방법과 실시간 처리 방법으로 구분되며 후처리 방법은 다시 Static, Stop＆Go 및 동적(Kinematic) 방법으로 세분되고 실시간 처리 방법은 DGPS(Differential GPS)와 RTK(Realtime Kinematic) 방법으로 세분된다. 이와 같은 여러 가지 측량법 중 우리나라의 실무에서는 유독 후처리 방법 중의 Static 측량과 실시간 처리방법중의 DGPS 측량이 주로 사용되어 왔는데, 그런 배경에는 여러 가지 원인이 있으나 무엇보다도 가장 큰 원인은 공공측량 작업규정 등의 측량 관련 법규에서 다양한 종류의 GPS측량기법을 제도적으로 인정하지 못함으로 인하여 일반 측량기술자들의 GPS에 대한 인식이 결여된 때문이라 볼 수 있다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.105-110
• /
• 2006

우리나라에 GPS 위성측량이 도입되기 시작한 것은 최근에 이루어 졌으며 많은 발전을 해오고 있지만 해결해야 할 많은 문제점을 가지고 있다. 현재 우리나라의 GPS 위성측량의 사용에 있어서 여러 가지 문제점 중 현재 지구 주위를 운항하고 있는 24개의 GPS 위성으로 지상 어느 곳에서나 24시간 동안 위성신호를 수신할 수 있게 되었지만 고층 빌딩과 같은 도심 계곡, 복잡한 한국지형, 산악지역 등에서의 위성 장애물에 의한 신호의 차단으로 한계가 발생하고 있다. NAVSYNC의 CW25 GPS 수신기는 -156dBm이하의 신호강도에서도 확실한 위치 fix가 가능하고, 이러한 능력은 도심지나, 울창한 숲과 심지어는 건물 안과 같이 신호가 미약한 지역에서도 사용될 수 있다. 이에 본 연구에서는 Indoor GPS 수신기를 이용하여 측지분야에서 검증된 GPS측량방법을 통해 수신데이터를 비교 분석하고 수신기의 정밀도 향상에 관한 연구를 하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.263-272
• /
• 2001

For a high resolution real-time kinematic GPS surveying using carrier phase, positioning accuracy according to the OTF initialization was better than 1 cm with more than 5-minute initialization within 20 km baseline. Also, it is recommended that measurements be carried out when PDOP and RDOP can be kept less than 4.0 since the geometrical layout of satellites has a great influence on the positioning accuracy. After considering the initial conditions and measuring time zone for real-time kinematic GPS. post-processed continuous kinematic GPS and real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller at the time of measurement. As a result, it has been revealed that possible noise in surveying could be corrected and the accuracy could be improved.