• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2016

Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.179-184
• /
• 2006

Rapid and high-precision positioning with a Global Navigation Satellite System (GNSS) is feasible only when very precise carrier-phase observations can be used. There are two kinds of mathematical models for ambiguity resolution. The first one is based on both pseudorange and carrier phase measurements, and the observation equations are of full rank. The second one is only based on carrier phase measurement, which is a rank-defect model. Though the former is more commonly used, the latter has its own advantage, that is, ambiguity resolution will be freed from the effects of pseudorange multipath. Galileo will be operational. One of the important differences between Galileo and current GPS is that Galileo will provide signals in four frequency bands. With more carrier-phase data available, frequency combinations with long equivalent wavelength can be formed, so Galileo will provide more opportunities for fast and reliable ambiguity resolution than current GPS. This paper tries to investigate phase only fast ambiguity resolution performance with four Galileo frequencies for short baseline. Cascading Ambiguity Resolution (CAR) method with selected optimal frequency combinations and LAMBDA method are used and compared. To validate the resolution, two tests are used and compared. The first one is a ratio test. The second one is lower bound success-rate test. The simulation test results show that, with LAMBDA method, whether with ratio test or lower bound success rate validation criteria, ambiguity can be fixed in several seconds, 8 seconds at most even when 1 sigma of carrier phase noise is 12 mm. While with CAR method, at least about half minute is required even when 1 sigma of carrier phase noise is 3 mm. It shows that LAMBDA method performs obviously better than CAR method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.171-182
• /
• 2019

Bicycles are a pollution-free means of transportation. In addition to leisure, the use of bicycles is increasing as alternative eco-friendly transportation. Accordingly, bicycle accidents are also increasing. The purpose of this study is to implement bicycle black box technology to identify situation when a bicycle accident occurs. Currently, bicycle black box products are mainly based on video cameras, and are commercially available by adding various functions mainly on high resolution cameras and are sold at high prices. If a bicycle accident occurs, quantitative data on the accident location at the time of the accident and the state of the bicycle at the time of the accident is required. In this study, IMU sensor used to obtain acceleration and slope, and time and coordinates are obtained. In addition, real-time acceleration and tilt data while is stored in memory card and by using Bluetooth transmit to the smart phone owned by the in real time to prevent accidents and to monitor status.

• Journal of Navigation and Port Research
• /
• v.34 no.8
• /
• pp.603-607
• /
• 2010

The LORAN system had been used widely and it was an essential navigation aid for ships in the ocean until the GPS is adopted actively. In particular, it was essential functionality for the ships to sail the oceans. According to the advancement of industry, however, the current accuracy of traditional Loran is insufficient for the utilization of harbour approach, land navigation, and the field of survey and timing. Therefore it is necessary that the study on the improvement of the positioning accuracy of Loran. The one of the improving methods is to measure and compensate the propagation time delay between the transmitter and user's receiver, which is called as additional secondary factor (ASF). In this study, we measured the ASF between the Pohang master transmitting station (9930M) and four points where locate within 33 km apart from the transmitting station, using the measuring technique of the absolute time delay without a time of coincidence (TOC) table. As the result of measurement, the ranging error caused by the propagation delay was about 210 m at 33 km, however it can be reduced up to 40 m with ASF compensation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2532-2537
• /
• 2012

In recent, the researches on driver assistance systems have been actively performed with development of vehicle industry. AVM(Around View Monitoring) Systems, a part of these systems, have been researching and developing. Existing AVM systems have been developed in the forms of embedded systems or a SoC (System on Chip) to provide view around vehicle in real time. However, if Car PC is equipped with in vehicle, AVM can be developed using only software without additional cost. In this study, we implemented AVM system which provides location information by adding the informations such as latitude, longitude and speed to functions of "Car PC" based AVM system. If storing function is added to the AVM system implemented in this study which provides location information, the system with storing function can be used as AVM black box system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.45-54
• /
• 2004

In this paper, a view point tracking system has been realized for outdoor augmented reality including broad area monitoring. Since the surroundings of the moving view point are changing, it is necessary to track the position and observation moment of the view point system for consistency between real and virtual images. For this reason, the GPS(Global Positioning System) is applied to the realized system for tracking the information on position and direction of the moving system. In addition, an optical position tracking system that is able to track view point in a limited area is used, because the local tracking system has to trace the image variation, seen to the observer in a moving vehicle, at a particular position and time. It was found that the realized outdoor augmented reality system, which combined the virtual information tracked in real time with the real image, can be very practical in various application area.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.98-108
• /
• 2015

An integrated command system is critical for the safety of firefighters and effective work in the headquarters of a special disaster areas such as natural disaster or large man-made hazard. The integrated command system requires environmental information such as temperature, humidity, and $CO_2$ levels, as well as personal physical information such as pulse and air respirator levels. An Analog to Digital Converter (ADC) chip converts sensed information into digital signals, and a Micro Controller Unit (MCU) transmits the digital signals to a transmission board using serial communication through a Serial Peripheral Interface (SPI). The digital signals are saved in a transmission board and transmitted to the integrated command system by a Radio Frequency (RF) unit. The location of fire-fighters in a building are determined using a gyro sensor and an inertial sensor. The collected information is applied to the integrated command system for firefighter safety and to ensure that they can effectively carry out their duties. Tthis study theoretically and experimentally investigated the technologies of RF transmission, indoor position, and an integrated command system that supports decision making using the transmitted information.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.31-50
• /
• 2004

With the growth of wireless communication networks and mobile devices taking in GPS, Location-Based Service(LBS) is becoming an integral part of mobile applications. LBS can deal with location-aware features such as persons holding mobile phones or vehicles equipped with GPS, and provide the users with the location information of the features. Thus it is necessary to develop moving object database systems to store, manage, and query moving objects which change their locations continuously as time passes. In this paper, we design and implement a query processing component which deals with moving objects as a key data type. For this component, we define a new SQL-like query language(called MOQL) and as a consequence, design and implement modules that analyze and execute queries. It supports various types of operators that process range queries, infer topological relations, compute trajectories, and find k-nearest neighbors. It can be used as a subsystem if other application systems which deal moving objects and also supports ADO.NET interface that can be used to interact end-users.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.1-17
• /
• 1997

Geographic Information Systems(GIS) are very useful for spatial analysis and policy in local government administration. Recognizing the value of GIS, Chungnam province authorities put a spur on the introduction and development of it. But they have some difficulty in this process because of technical restraint, expertise shortage and budget limit. This study has surveyed current achievement and conditions for GIS development and presented general framework and subordinate tasks to build up GIS. First of all, there are a few prior conditions to guarantee the success of GIS: First, we should set up reasonable long-term plan and follow systematic procedures according to the plan. Second, it is essential to clarify what initiatively manage to whole business and so we should make up GIS-Board as an institutional center for this job. Third, we must research how to take advantage of already existing NGIS(National Geographic Information System), so that we may eliminate redundancy of investment. We can save a lot of finance and human resources through it. Fourth, we must focus on the importance of accurate mapping by utilizing new technology like GPS(Global Positioning System). Fifth, we should arrange efficient training program to constantly produce excellent human resources for GIS.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.127-133
• /
• 2014

The purpose of this study is to evaluate the accuracy of Network-RTK(VRS) survey for applying to Ground Control Points(GCPs) survey required for mapping aerial photographs. Network-RTK has been serviced by National Geographic Information Institute since 2007. On the basis of the global coordinates system(ITRF2000), the coordinates of GCPs determined by Static GNSS survey with relative positioning techniques were regarded as accurate values. The coordinates of GCPs were also determined by Network-RTK survey using two kinds of receivers, and then they were converted into the global coordinates system(ITRF2000) by applying suitable geoid model and coordinate transformation. These coordinates of GCPs were compared with those from Static GNSS survey. The root mean squares error (RMSE) of coordinate differences between Network-RTK and Static GNSS was ${\pm}2.0cm$ in plane and ${\pm}7.0cm$ in height. Therefore, Network-RTK survey that enables single GNSS receiver to measure positions in short time is a practical alternative in positioning GCPs to either RTK survey that uses more than two sets of GNSS receivers or Static GNSS survey that requires longer observation time.