• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.357-362
• /
• 2006

This paper describes two kinds of personal hand-held electronic devices to enhance marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1045-1052
• /
• 2011

Recently, because of complex cultural space, underground space are becoming larger. Therefore, the demand for location-based services is growing. VLC (Visible Light Communication) is based on the LED lighting infrastructure so that suitable LBS (Location-based service) is possible for the targeted places in indoor space. To experiment with indoor LBS by VLC, we measure the identification distance according to variable angles between LED and photo diode. We send the different ASCII code for each LED light, then we found the maximum identification distance is 1.75m from LED lights. From the results of this experiment, we show that indoor navigation is possible.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.391-398
• /
• 2009

Variations of mean ionospheric spatial gradient over Korea are analyzed in order to support GNSS (Global Navigation Satellite System) augmentation systems and integrity monitering systems. A software for analyzing the ionospheric spatial gradient is developed using an ionospheric plate model. Daily and annual variations of ionospheric delay and spatial gradient are analyzed using GPS data in 2003 and 2005 respectively. The ionospheric delays and spatial gradients in 2003 were larger than 2005. Also, the south-north gradient, about -1.0mm/km, is nearly two times larger than the east-west gradient. The annual ionospheric spatial gradients over Korea is varied within 2mm/km.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.73-73
• /
• 2015

자연 하천의 홍수 유량 측정은 매우 어렵고 많은 비용과 시간, 노력을 요하는 작업이다. 보다 안전하고 경제적인 유량 측정의 대안으로 제시된 것이 하천 표면의 영상 분석을 이용하는 표면영 상유속계이다. 본 연구는 안드로이드 기반의 스마트폰을 이용한 실시간 표면영상유속계를 개발하는 것이다. 스마트폰에 내장된 카메라, GPS, 방향 센서, CPU를 활용하여, 실시간으로 현장에서 하천의 표면유속을 측정하는 것이다. 먼저, 스마트폰의 GPS를 이용하여 측정 현장의 위치를 잡고, 경사계(방향 센서)를 활용하여 카메라와 촬영면의 기하적인 관계를 설정한다. 수표면과 카메라의 높이차만을 입력하고, 측정된 카메라의 경사에서 하천 수표면의 위치관계를 추정할 수 있는 카메라 모형을 작성하였다. 이 방법을 이용함으로써 기존 표면영상유속계의 단점 중 하나인 참조점 보정이 필요없도록 하였다. 내장된 카메라로 정해진 시간(3초) 동안 동영상을 촬영하고, 촬영된 동영상은 개방 소스의 영상처리 라이브러리인 JavaCV를 이용하여 프레임별로 분할하고, 이를 시공간 영상 분석하여 하천 표면의 2차원 유속장을 추정한다. 영상의 시공간 분석에는 상호상관 시공간분석법을 이용하였다. 모든 코드는 안드로이드 운영체제에서 실행되도록 Java로 작성하였다. 시판되는 안드로이드 스마트폰에 적용하여 현장 시험한 결과 3초간의 영상 처리에 5초 정도를 소요하여, 거의 실시간으로 유속을 측정할 수 있었다. 또한 유속 측정 오차는 일반적인 영상 처리의 오차인 5% 내외였다.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.87-97
• /
• 2006

LIDAR(Light Detection and Ranging) is a new technology for obtaining DEM(Digital Elevation Model)ewith high density and high point acuracy. As LIDAR emerged, DEM could be developed in the earthsurface more efficiently and more economically, compared to the conventional aerial photogrametry.In this study, a digital camera is simultaneously used in combined LIDAR surveying, and acquired digitial image and DEM produce digital orthoimage. In this process, methods of combining sensor andorthoimage, GCPs determined by GPS surveying are used. Two digital orthoimage are produced; onewith a few GCP and the other without them. The produced maps can be used to corect or revised1:1,000 or 1:5,000 scale maps acordingly.

• Structural Engineering and Mechanics
• /
• v.70 no.5
• /
• pp.639-647
• /
• 2019

The performance of precast concrete structures is greatly influenced by the behaviour of beam-to-column connections. A single connection may be required to transfer several loads simultaneously so each one of those loads must be considered in the design. A good connection combines practicality and economy, which requires an understanding of several factors; including strength, serviceability, erection and economics. This research work focuses on the performance aspect of a specific type of beam-to-column connection using partly hidden corbel in precast concrete structures. In this study, the results of experimental assessment of the proposed beam-to-column connection in precast concrete frames was used. The purpose of this research is to develop and apply the Extreme Learning Machine (ELM) for moment-rotation prediction of precast beam-to-column connections. The ELM results are compared with genetic programming (GP) and artificial neural network (ANN). The reliability of the computational models was accessed based on simulation results and using several statistical indicators.

• Journal of radiological science and technology
• /
• v.45 no.5
• /
• pp.439-448
• /
• 2022

The purpose of this study was to analyze the results from statistical process control (SPC) to recommend upper and lower control limits for planning parameters based on delivery quality assurance (DQA) results and establish our institutional guidelines regarding planning parameters for helical tomotherapy (HT). A total of 53 brain, 41 head and neck (H & N), and 51 pelvis cases who had passing or failing DQA measurements were selected. The absolute point dose difference (DD) and the global gamma passing rate (GPR) for all patients were analyzed. Control charts were used to evaluate upper and lower control limits (UCL and LCL) for all assessed treatment planning parameters. Treatment planning parameters were analyzed to provide its range for DQA pass cases. We confirmed that the probability of DQA failure was higher when the proportion of leaf open time (LOT) below 100 ms was greater than 30%. LOT and gantry period (GP) were significant predictor for DQA failure using the SPC method. We investigated the availability of the SPC statistic method to establish the local planning guideline based on DQA results for HT system. The guideline of each planning parameter in HT may assist in the prediction of DQA failure using the SPC statistic method in the future.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.883-888
• /
• 2022

In this paper, we developed a portable IoT device for lifesaving and a web service prototype based on the device and evaluated its functions. The portable IoT terminal for lifesaving is designed for easy to carry, and to communicate possibly between user by LTE Cat. M1 modem which is a low-power broadband IoT communication technology. So, in case of emergency, it is possible to give priority to nearby users and to determine the exact location with built-in GPS. In the future, it will be designed to enable rescue requests in various ways, such as button signals, voice, and acceleration changes.

• The Korean Journal of Ecology
• /
• v.19 no.3
• /
• pp.251-260
• /
• 1996

The effect of forest fire on soil microarthropod fauna was investigated in the Inhoo Park, located at Deokjin-gu, Chonju city, where fire burned about 2 hectares on April 5, 1994. Vegetation of the area was covered with mixed forest such as 20 to 30 year old black locust, alder, and pine gree, etc., and also rich in understory plants, dead leaves, twigs, etc. The soil samples were taken from burnt soil and near-by control site on April 10, June 6 and Oct. 22 in 1994, and June 26, 1995. Soil microarthropods were extracted using Tullgren apparatus for 72 hours. Soil microarthropods collected in this experiment were 8, 013 at control and 3, 805 at the burnt site making a total of 11, 818 from 5 classes. Therefore, appearance of microarthropods was reduced to 52.5% at burnt site. Dominant animal groups were Acari (45%) and collembola (46%). The reduced rate of soil animal density by fire damage was 52.5% of the total soil microarthropods accounting 36% in Acari and 70% in collembola. The reduction of soil animal density by fire was 65.3% by habitat destruction and 51.7% by diret shock from fire heat. In Collembola, 89% was reduced by habitat destruction. Oribatid mites collected at sample plots included 29 families, 47 genera and 58 species. Forty-two species at burnt site and 47 species at unburnt site were identified, of these 32 being common species at both sites. The density ratio of soil animals at the burnt sites and those at unburnt sites was 38.6% va 61.4% resulting in 37% reduction due to fire. The dominant species with more than 5% in relative density were Trichogalumna nipponica (7.3%) and Eremobelba japonica (5.8%) at unburnt site, shereas 5 species including Eohypochthonius crassisetiger (8.5%) at the burnt site. The number of these species were 32.1% of total number. MGP analysis based on the number of oribatid mites indicated GP type at both unburnt and burnt sites, revealing domination of the P group in oribatid mites.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.38-44
• /
• 2023

This study aims to determine how agricultural drones are operated for flight tests using a 5G communication in order to carry out a mission such as sensing agricultural crop healthy status with special cameras. Drones were installed with a multi-spectral and IR camera to capture images of crop status in separate altitudes with different speeds. A multi-spectral camera can capture crop image data using five different particular wavelengths with a built-in GPS so that captured images with synchronized time could provide better accuracy of position and altitude during the flight time. Captured thermal videos are then sent to a ground server to be analyzed via 5G communication. Thus, combining two cameras can result in better visualization of vegetation areas. The flight test verified how agricultural drones equipped with special cameras could collect image data in vegetation areas.