• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.461-468
• /
• 2019

The aim of this study was to compare and analyse the national players between the winning games and the losing ones by classifying the GPS data measured in the competition. 27 players of Korean national team on field hockey had analysed to collect plenty of data by using GPS system in real time on 16 A-matches for this paper. The result was followed: First, it has revealed that the winning games showed that it had played a lot in the rest of the zone except for zone 1 and zone 5 from zone 1 to zone 6. Second, is has also shown that it had a significant differences into the distance between the winning games and the losing ones. Third, there were no significant differences between Low-speed zone (zone 1 to Zone 3) and High-speed zone (zone 4 to zone 6) into the distance but were a significant differences on the number of high-accelerations in a section of accelerations. Last, in the position-specific, it has shown a significant differences between a distance by the section and the acceleration frequency and the results showed that the difference between the low accelerations and high ones influenced positively related to the performance.

• Journal of Life Science
• /
• v.29 no.3
• /
• pp.362-368
• /
• 2019

For the practical application and development of biopolymer flocculant Biopol32 produced by Pseudomonas sp. GP32, its flocculation effect on wastewater from food processing, slaughter houses, and the dyeing industry was investigated. In the food processing wastewater, Biopol32 led to a chemical oxygen demand (COD) reduction rate of 70% and a suspended solid (SS) removal rate of 49% at pH 6.0. In the slaughter house wastewater at pH 4.0, a COD reduction rate of 61% and SS removal rate of 91% were observed, and in the dyeing wastewater, the rates were 72% and 92%, respectively, at pH 5.0. The size of floc formed during the flocculation process was 10 mm at a final concentration of 20 ppm, and the dehydration efficiency was 62%. In both the bioflocculant Biopol32 group and a PAA synthetic flocculant group, optimal flocculant concentration that yielded the best overall dehydration efficiency was 20 ppm, and, at this concentration, the shortest filtration time to reach the natural critical moisture content of 78.1% was attained.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.49-54
• /
• 2023

The Global Positioning System (GPS) was developed for military purposes and developed as it is today by opening civilian signals (GPS L1 frequency C/A signals). The current satellite orbits the earth about twice a day to measure the position, and receives more than 3 satellite signals (initially, 4 to calculate even the time error). The three-dimensional position of the ground receiver is determined using the data from the radio wave departure time to the radio wave Time of Arrival(TOA) of the received satellite signal through trilateration. In the case of navigation using GPS in recent years, a location error of 5 to 10 m usually occurs, and quite a lot of areas, such as apartments, indoors, tunnels, factory areas, and mountainous areas, exist as blind spots or neutralized areas outside the error range of GPS. Therefore, in order to acquire one's own location information in an area where GPS satellite signal reception is impossible, another method should be proposed. In this study, IMU(Inertial Measurement Unit) combined with an acceleration and gyro sensor and a geomagnetic sensor were used to design a system to enable location recognition even in terrain where GPS signal reception is impossible. A method to track the current position by calculating the instantaneous velocity value using a 9-DOF IMU and a geomagnetic sensor was studied, and its feasibility was verified through production and experimentation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1104-1112
• /
• 2004

In this paper, we establish measurement methods of vibration frequency for three-dimensional behavior measurement of large-scale structure using laser and high-speed CCD camera. We project the diode laser having a smaller fluctuation on the object plane attached to the structure and measure the displacement of the structure using a precise relative measurement algorithm. When we use high-speed(120 frames/sec) CCD camera, we can measure the vibration frequency having the uncertainty within 0.5% by taking FFT on the displacement, from 0Hz to 40Hz. And we also confirm the reliability and economical string of the suggested measurement method of vibration frequency of the structure by showing the accuracy of displacement measurement using laser is comparable to that of relative positioning methods using GPS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.455-461
• /
• 2008

In this paper, the performance of a scalar filter and a scalar adaptive filter are analyzed. In order to make indoor experimental environment similar to outdoor test, ultrasonic sensors are used instead of GPS. The scalar adaptive filter, which is continuously estimating velocity error covariance and measurement noise covariance by using adaptive method, is different from the scalar filter. Experimental results show that the scalar adaptive filter has better position estimating performance than the scalar filter by estimating above two parameters with an adaptive method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.245-251
• /
• 2001

Nowadays, the first design elements of horizontal alignment are very important things to extension or improvement of highway. When the design elements ale lost or damaged, it is necessary to recalculation. In this paper, an investigation is made on the method of representation of horizontal alignment as a result of design element using generalization method. The results show that northing calculated about 0.2∼5 meters and easting calculated about 1∼40 meters between calculated and design data. Because the maximum value is a very small compared to total horizontal alignment length. calculated data have been fined to presentation of observed highway.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.509-513
• /
• 1999

The molecular size reduction and the formation of bitterness during a tryptic hydrolysis of soybean 11S glycinin were determined by using quantitative analysis and organoleptic evaluation. The 11S glycinin of 90% purity was prepared by cryoprecipitation and Con A Sepharose 4B affinity chromatography, and hydrolyzed with trypsin in a pH-stat reactor for 4 h. Bitterness was formed within 1 h of hydrolysis, and then slowly increased up to $3.5\times10^{-5}$ M quinine-HCl equivalent. The extent of hydrolysis (DH) was 7% at 1 h and increased up to 12% by the end of the reaction. The -amino nitrogen content increased from an initial 0.7 mM to 7 mM at the end of the period. The SDS-PAGE analysis showed that the acidic subunit of 11S glycinin was mostly hydrolyzed. The GP-HPLC analysis indicated that the bitterness was mainly contributed by the peptide fractions of molecular weights of 360-2,100 Da.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.682-689
• /
• 2011

Recently, there are frequent disasters by Swell-like Wave in the coastal area, Korea peninsula. This phenomenon (Swell-like Wave) has long period above 10 seconds compared with wind wave. To prevent these disasters by the long-period wave in advance, it's necessary to observe it in real time. But existing instruments for wave observation can not observe long-period wave because they mainly are aimed to measure the short-period wind wave. Therefore, in this research it is tried to develop the GPS based Long Period Wave Observation System which real time operation can be realzied in the sea.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.74-80
• /
• 2006

GPS, which has been opened to the public since the 1980's, uses the C/A code time of arrival to estimate the position, and measures the carrier doppler frequency to estimate the velocity. In development from the 1990's, DGPS has improved position accuracy by eliminating common errors and CDGPS has achieved cm-level position accuracy using carrier phase. In this paper, a modified LSAST ambiguity resolution method for CDGPS is proposed to improve reliability and computational efficiency. Also the test results of cm level relative positioning of a moving vehicle using single frequency GPS receivers are compared to INS position. This research result can be widely used for the development of high precision INS, unmanned autonomous driving, survey and mapping, etc.

• Journal of Advanced Navigation Technology
• /
• v.4 no.2
• /
• pp.152-161
• /
• 2000

Recently, it is considered to combine the GPS receiver with the GLONASS for the improvement of performance and accuracy. This combined system reduces errors by SA for GPS, and has merits to select receivable satellite. In this paper, aperture-coupled patch antenna and small sized ceramic dielectric patch antenna are designed and implemented for GPS/GLONASS combined receiver, which show a wideband characteristics with circular polarization. The manufactured antennas have the bandwidth more than 240 MHz, VSWR less than 1.5:1, and the axial ratio less than 3dB, and satisfy required characteristics of the GPS/GLONASS antenna.