• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.188-188
• /
• 2016

The Mekong which is one of the world's most significant rivers plays an extremely important role to South East Asia. Lying across six riparian countries including China, Myanmar, Thailand, Laos, Cambodia and Vietnam and being a greatly biological and ecological diversity of fishes, the river supports a huge population who living along Mekong Basin River. Therefore, much attention has been focused on the giant Mekong Basin River, particularly, the soil erosion and sedimentation problems which rise critical impacts on irrigation, agriculture, navigation, fisheries and aquatic ecosystem. In fact, there have been many methods to calculate these problems; however, in the case of Mekong, the available data have significant limitations because of large area (about 795 00 km2) and a failure by management agencies to analyze and publish of developing countries in Mekong Basin River. As a result, the Universal Soil Loss Equation (USLE) model in a GIS (Geographic Information System) framework was applied in this study. The USLE factors contain the rainfall erosivity, soil erodibility, slope length, steepness, crop management and conservation practices which are represented by raster layers in GIS environment. In the final step, these factors were multiplied together to estimate the soil erosion rate in the study area by using spatial analyst tool in the ArcGIS 10.2 software. The spatial distribution of soil loss result will be used to support river basin management to find the subtainable management practices by showing the position and amount of soil erosion and sediment load in the dangerous areas during the selected 56- year period from 1952 to 2007.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.68-75
• /
• 2008

This paper describes the design and implementation of a low cost inertial navigation system(INS) using an inertial measurement unit(IMU), a digital compass, GPS, and an embedded system. The system has been developed for a transporter that load and unload ship blocks in a shipbuilding yard. When the transporter would move from place to place, they would periodically pass under obstructions that would obscure the GPS signal. This increases the error when estimating the position. Thus the INS has been used to improve position accuracy. INS is also capable of providing continuous estimates of the transporter's position and orientation. Even though IMU is typically very expensive, this INS is made of "low cost" components and the indirect Kalman filtering algorithm.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.166-169
• /
• 2006

Our country's coast is vulnerable area to natural disaster which the repetitive damages occur every year including a loss of lives, the damage of facilities and erosion mostly except for the east coast because of a typhoon, tidal waves, sea water overflowing by topographic structure of low-lying gentle slope and shallow sea. However, as for prevention of natural disaster occurring every year, the situation is that it's centered on the restorationcentered measures and the general disaster prevention research to minimize damages at the time of disaster occurrence is insufficient. This study intendedlop t to devehe techniques possible for real time sampling of damage prediction areas on Web in order to support decision making for damage prevention and establishment of disaster prevention policy. For this, the thematic map was produced related to disaster based on high-resolution satellite picture, and the environmental DB similar to real world was constructed through topographic construction of three-dimension integrating the parts of land and the sea. In addition, the system was developed possible for the expression of damageable regions by real time grasp of dangerous regions at the time of disaster occurrence through over flowing simulation of three-dimension, and it's intended to prepare a basis to minimize damages to disaster situations through it.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.2
• /
• pp.35-53
• /
• 2007

GML is a mark-up language which is suggested by OGC(Open GIS Consortium) for use of encoding standard concerning with storing and transferring Geographic information. For general spatial network database, researches supporting GML documents can be classified into three categories : parsing, storing, and retrieval of GML documents. Among them, the 'Storing of GML document' is essential for efficient GML document retrieval. However, There is little research on schema for storing GML documents. In addition, the existing schema for storing XML documents can't be used for GML documents due to geographic information. Therefore, In this paper, we propose efficient schema for storing GML documents In addition, we do performance evaluation of the GML schema.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.28-34
• /
• 2009

In a Gas Insulated Substation (GIS), Very Fast Transients (VFTs) are generated mainly due to switching operations. These transients may cause internal faults, i.e., layer-to-layer faults in a capacitively graded bushing as it is one of the most important terminal equipment for GIS. The healthiness of the bushing is generally verified by measuring its leakage current. However, the change in current magnitude/pattern is only marginal for different types of fault conditions. Leakage current monitoring (LCM) systems generate large amounts of data and computer aided interpretation of defects may be of great assistance when analyzing this data. In view of the above, ANN techniques have been used in this study for identification of these minor faults. A single layer perceptron network, a two layer feed-forward back propagation network and cascade correlation (CC) network models are used to identify interlayer faults in the bushing. The effectiveness of the CC network over perceptron and back propagation networks in identification of a fault has been analysed as part of the paper.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.273-282
• /
• 1999

For appling the GSIS on a air environment division, first of all, spatial-distribution of environmental factor which has distinction of continuous surface such as air-pollutant and a factor of weather must be able to be drawn. So we should estimate a distribution of whole area with point observation value which is observed on several restricted point. On this study, we investigate and study the application of GSIS technique which can be visible emission characteristic by regions, items, and time using data such as traffic quantity data, digital map for GIS-T and emission factor of each pollutant of vehicles about whole area of Seoul surveyed by traffic sensus of Seoul to air environment division.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.4 s.22
• /
• pp.95-103
• /
• 2002

The accuracy of Digital Map does not meet the user's expectation, including the many errors caused while producing the project, this will be useless resulting waste of enormous national budget. To solve this Accuracy problem, clear regulations about the position accuracy of scaled Digital Map should be set immediately and provide the users with accurate information about Digital Map enabling the users to use Digital Map for each GIS application field. For this reason, the position accuracy evaluation of existing Digital Maps produced in diverse methods is on demand. In this study, therefore, we performed horizontal position survey of local selected Facilities Total Station equipment to evaluate the horizontal position accuracy of 1:1,000, 1:5,000 scaled Digital Map, obtained standard deviation using the results, performed T-Test to confirm the presence of bias and evaluated the position accuracy of Digital Map.

• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.1027-1033
• /
• 2009

For the assesment of pollutant loads, a monitoring has been conducted to identify hydrologic conditions and water quality of the Oenam watershed in Juam Lake, and the SWAT model integrated with GIS was applied to the watershed and evaluated for its applicability through calibration and verification using observed data. For the model application, digital maps were constructed for watershed boundary, land-use, soil series, digital elevation, and topographic input data of the Oenam watershed using Arcview. The observed runoff was 832.8 mm while the simulated runoff was 842.8 mm in 2003. The model results showed that the simulated runoff was in a good agreement with the observed data and indicated reasonable applicability of the model. In terms of nutrient load, the simulation results of T-N, T-P showed a similar trend to observed values. The observed T-N load was 10.8 kg/ha and the simulated T-N load was 7.6 kg/ha while the observed T-P load was 0.21 kg/ha and the simulated T-P load was 0.18 kg/ha. In general, SWAT model predicted observed runoff and loads of T-N and T-P after calibration with observed data in acceptable range. Overall, SWAT model was satisfactory in estimation of nutrient pollutant loads of the rural watershed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.496-501
• /
• 2005

SWAT2000 model directly estimate the loading of water, and nutrients from land areas in a watershed. it allows to add nutrient loading from the point sourece like a sewage treatment plant and it also has a GIS interface which can easily see the spatial relationship between subbasins. For better assessment of nutrients loading to KEUMGANG estuary, SWAT2000 model applied to KEUMGANG estuary watershed. Model calibration and verification was firstly poerformed at Gongju site duing the period $1999{\sim}2003$. $R^2$ value was 0.96 for streamflow, 0.94 for T-N load and 0.52 for T-P load. The accuracy of the model at Gongju site suggest that the SWAT2000 can be available to estimate streamflow, Nutrients loading to the KEUMGANG estuary.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.49-52
• /
• 2007

The recent advances in digital imaging and computing technology have resulted in a rapid accumulation of digital media in the personal computing and entertainment industry. In addition, large collections of such data already exist in many scientific application domains such as the geographic information systems (GIS), digital library, trademark imaging, satellite imaging and medical imaging. Thus, the need for content-based retrieval from visual media, such as image and video data, is ever increasing rapidly in many applications.