• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.223-231
• /
• 2009

This study intends to develop a GIS-based environmental assesment technique for environmental friendly road route plan using a spatial analysis function. After embodying an impact range based on the analysis of factors which cause the environmental damage by the road construction, a literature survey on a diverse grading cases and legal regulations was conducted. As a quantitative model for the spatial analysis, AHP was selected. As the environmental assessment, 8 items such as topography & geology, animals & plants, soil ecology, water quality, air quality, noise, land use, and landscape were selected. and then finally classified into three-grades using a pairwise comparison of the alate collected by a questionnaire surveying, weighting values were applied to there 8 items. The highest weight value, the grade 1 among eight was 0.191 for animals & plants. As the result of verifying the above method for the case region, the most environment-friendly road route could be generated.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.2
• /
• pp.1-14
• /
• 2018

The main objective of this paper is to classify properties of the locational environment for each debris type by calculating likelihood ratio based on the correlation between the distributions for each type of debris landform. A total of 8 thematic maps, like as elevation, slope, aspect, curvature, topographic wetness index (TWI), soil drainage, geology, and landcover including with GIS spatial information generally used in this type of debris landform analysis. The results of this study showed that the block stream had a high likelihood ratio compared to talus in areas with relatively high elevation; and concerning slope, the block stream had a high likelihood ratio in a relatively low region than talus. Concerning aspect, a clear correlation could not be analyzed for each debristype, and concerning curvature, the block stream displayed a developed slope on the more concave valley than the talus. Analysis concerning TWI, the block stream displayed a higher likelihood ratio in wider sections than talus, and concerning soil drainage, the talus and block stream both displayed a high likelihood ratio in regions with well-drained soil. The talus displayed a high likelihood ratio in the order of metamorphic rocks, sedimentary rocks, and granite, while the block stream displayed a high likelihood ratio in the order of volcanic rocks, granite, and sedimentary rocks. In addition, concerning landcover, the likelihood ratio had the most concentrated distributed compared to natural bare land only concerning talus. Based on the likelihood ratio result, it can be used as basic data for extracting the possible areas of distribution for each debris type through the GIS spatial integration method.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.129-150
• /
• 2006

Mineral potential mapping is an important procedure in mineral resource assessment. The purpose of this study is to analyze mineral potential using weight of evidence model and a Geographic Information System (GIS) environment to identify areas that have not been subjected to the same degree of exploration. For this, a variety of spatial geological data were compiled, evaluated and integrated to produce a map of potential mineral in the Gangreung area, Korea. for this, a spatial database considering mineral deposit, topographic, geologic, geophysical and geochemical data was constructed for the study area using a GIS. The used mineral deposits were non-metallic(Kaolin, Porcelainstone, Silicastone, Mica, Nephrite, Limestone and Pyrophyllite) deposits of sedimentary type. The factors relating to mineral deposits were the geological data such as lithology and fault structure, geochemical data, including the abundance of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, Zn, $Cl^-,\;F^-,\;{PO_4}^{3-},\;{NO_2}^-,\;{NO_3}^-,\;SO_{42-}$, Eh, PH and conductivity and geophysical data, including the Bouguer and magnetic anomalies. These factors were used with weight of evidence model to analyze mineral potential. Probability models using the weight of evidence were applied to extract the relationship between mineral deposits and related factors, and the ratio were calculated. Then the potential indices were calculated by summation of the likelihood ratio and mineral potential maps were constructed from Geographic Information System (GIS). The mineral potential maps were then verified by comparison with the known mineral deposit areas. The result showed the 85.66% in prediction accuracy.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.207-225
• /
• 2001

This study develops a GIS-based system which examines the adequacy of the Groundwater development project before the actual designing of the project. A system environment is constructed in order to efficiently and scientifically manage and analyze data related to Groundwater through a Server/Client environment. For this programs such as GIS S/W ArcVies3.2, RDBMS ORACLE, ArcSDE (Spatial Database Engine) are used. WHPA and AQTESOLV are employed as a underground water simulation program and Scripts, a language for ArcView, is used to develop graphic user interface (GUI). Using the system developed here, we can transfer simulation results obtained by WHPA regarding Groundwater levels in new development projects into GIS. We can also judge whether a Groundwater development project should be permitted through examining overlaps of th effects of the development and comparing with o pollutants. At the same time, the system has a feature of supporting Groundwater development and based designing through judging the proper amount of Groundwater in a new project. It is also possible to easily and quickly prepare charts and reports using the outputs of the system. Since a two-tiered system which shares DB using inter-and intranets is developed, all the departments in the ministry of agriculture and forest and the agriculture base corporation can share accurate, reliable and latest information related to Groundwater.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.39-44
• /
• 2003

Recently, GIS has been increasing its applicability in water resource field. The GIS based modeling process can generally be used for extracting channel network and watershed delineation. Through the overlay analysis, the extracted channel network can be overlayed with topographic and landuse maps to generate the input files for running a hydrologic model. This lead to consider GIS as a tool which can include subjective factors of the model designers in hydrologic analysis. Therefore, this study has compared GIS based HEC-GEOHMS with the classical approach. In general, both approaches have similar results, however, HEC-GROHMS has showed some errors. Based on the results, a GIS based approach could be more effective method with better credibility to obtain input parameters from topographic information as subsequent efforts were made to lessen the errors.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.475-480
• /
• 2003

Traditionally, the statistical methods analyze the relationship between landslide occurrence and related factors(soil depth, soil strength, slope angle, vegetation, etc.) in GIS technique. However, those methods have no mechanical meaning. Therefore, the deterministic model is suggested in this research. The method analyzes the mechanical equilibrium of a potential slide block and then calculates a slope safety factor. Since this method is able to consider the balance of forces applied to the slope and is a more reasonable method for an individual site. In this research, the spatial data is obtained, managed and analyzed using GIS technique. The infinite slope model is used to evaluate factor of safety and analyze the slope stability.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.141-143
• /
• 2003

The aim of this study is to evaluate the susceptibility of landslides at Clicap area, Indonesia , using a Geographic Information System (GIS). Landslide locations were identified from field surveys. The topographic and geological map were collected and constructed into a spatial database using GIS. The factors that influence landslide occurrence, such as slope, aspect and curvature of topography, were calculated from the topographic database and lihology and fault was extracted from the geological database. Then landslide susceptibility was analyzed using the landslide-occurrence factors by likelihood methods. The results of the analysis were verified using the landslide location data. The GIS was used to analyze the vast amount of data efficiently . The results can be used to reduce associated hazards, and to plan land use and construction.

• Korea journal of population studies
• /
• v.26 no.2
• /
• pp.175-195
• /
• 2003

This paper investigates spatial distribution of the knowledge-information occupations by utilizing Geographical Information System(GIS). The knowledge-information occupations, comprised mainly of professionals, engineers and managers, have played a key role in the knowledge-based information society. The uneven development of bureaucratization and informatization among regions have resulted in unequal spatial distribution of the knowledge-information occupations. Analysis of 1995 and 2000 Census shows that these occupations tend to concentrate in some major metropolitan areas, while the other areas show rather traditional occupational structure. This spatial unequality has been also found in the occupational distribution within Seoul. This tendency of spatial concentration in the occupational distribution inherited from the industrial society and is not going to diminish in the knowledge-information society. More aggressive policies to make the most of decentralizing impacts of information and communication technologies should be implemented to counter-balance this tendency.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.135-146
• /
• 2007

The purpose of this study was to ascertain and analyze environmental factors of subgenus Lycoctonum in Korea for conservation and management of rare high land plant species by GIS. We derived the habitat model of Lycoctonum from GPS coordination, habitat factors and digital topology maps. Suitable altitude fur the subgenus Lycoctonum is from 470m to 1320m, and northern slopes(between 15.5 and 36 degrees) are ideal for the Lycoctonum populations. In addition to altitude, slope and aspect, deciduous forest and approximation to water source were found as important factor. Using GIS and the Lycoctonum habitat model, we overlaid elevation, aspect, slope and land cover layers and analyzed buffer from the water source on two topology maps, Yang-Soo and Mock-Dong. After making prediction map for Lycoctonum habitat, we verified the existence of Lycoctonum populations on the predicted sites through field survey. Through this research, we're convinced that GIS software is powerful tool for plants conservation, such as finding unknown habitat or selecting alternative habitat.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.689-698
• /
• 2009

SOLAP system integrates and complements the functions of both OLAP and GIS systems. This enables users not only to easily access geospatial data but also to analyze and extract information for decision making. In this study a SOLAP system was designed and implemented to provide urban planners with GIS information when making urban planning decisions. Rapid urbanization in Korea has brought about ill-balanced urban structure as the result of development without detailed analysis of urban plans. Systematic urban planning procedures and automated systems are crucial for detail analysis of future development plans. Data regarding the development regulations and current status of land use need to be assessed precisely and instantly. Multi-dimensional aspects of a suggested plan must be formulated instantly and examined thoroughly using 'what if' scenarios to come up with a best possible plan. The SOLAP system presented in this study designed the dimension tables and the fact tables for supplying timely geospatial information to the planners when making decisions regarding urban planning. The database was implemented using open source DBMS and was populated with necessary attribute data which was freely available from the Statistics Korea bureau homepage. It is anticipated the SOLAP system presented in this study will contribute to better urban planning decisions in Korea through more timely and accurate provision of geospatial information.