• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2014

Precise Point Positioning (PPP) algorithms using GPS code pseudo-range measurements were developed and their accuracy was validated for the purpose of implementing them on a portable device. The group delay, relativistic effect, and satellite-antenna phase center offset models were applied as fundamental corrections for PPP. GPS satellite orbit and clock offsets were taken from the International GNSS Service official products which were interpolated using the best available algorithms. Tropospheric and ionospheric delays were obtained by applying mapping functions to the outputs from scientific GPS data processing software and Global Ionosphere Maps, respectively. When the developed algorithms were tested for four days of data, the horizontal and vertical positioning accuracies were 0.8-1.6 and 1.6-2.2 meters, respectively. This level of performance is comparable to that of Differential GPS, and further improvements and fine-tuning of this suite of PPP algorithms and its implementation at a portable device should be utilized in a variety of surveying and Location-Based Service applications.

• Journal of Agricultural Extension & Community Development
• /
• v.23 no.3
• /
• pp.257-270
• /
• 2016

This study was to investigate the perception and the usability of gardening program in a community for protection of school bullying at a middle school. The data collected from 640persons of middle school students, their parents, teachers, residents, NPO staffs for youth, active persons in urban agriculture and farming at 3communities during 2014.10.21.~2014.11.5. The degree on necessity of gardening program to protect school bullying were statistical significant different by age, garden experience, understanding and exchanging with youth and neighbors, keeping relationship or communication between school and family or residents. Most of parents, teachers prefer to increase the family counseling program by NPOs for protection of school bullying. On the contrary, concerns in urban agriculture and farming strengthened to cheer up gardening program for youth. In this study also, it was agreed that gardening program is useful for protection of school bullying and for stability of emotional safety for youth involving in middle school students. From these results, gardening program will be more contribution to communications and exchanges between school, student's family and their community persons as like neighbors, NPO staffs, concerns in urban agriculture and farming.

• Journal of Korea Game Society
• /
• v.17 no.3
• /
• pp.93-106
• /
• 2017

This study explains motivation and purpose of adolescents' game use based on Adler's individual psychology. Through in-depth interviews, it was found that the game is a field to reveal their need for approval in the social community and a means of expressing the attitude toward their life. In addition, need for approval shows a difference in adaptive/maladaptive attitude according to the social interest. This means that the role of peers, parents, and society is important in order for an individual's need for approval to produce social adaptive outcomes. It is necessary to acknowledge the game as an important area of self-actualization in which an adolescent is internalizing social interest and recognizing their self and it is required to switch from an attitude of exclusion, disdain and ignorance to an attitude of openness and tolerance and adaptive intervention.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.135-142
• /
• 1992

This study was performed to define the anatomical position of the mandibular canal and the findings during the sagittal split ramus osteotomy of the mandible. The mandibles of 20 adult Korean were used. The dimension of mandibular canal from the mandibular foramen to the 1st molar was measured at 4 specific coronal-sectional location by CT scan. The results were as follows ; 1. The distance from the mandibular canal to the medial aspect of the buccal cortical plate was greatest($4.5{\pm}1.1mm$) at 2nd molar area and was not significantly greater than at any other section. 2. Buccal cortex was thickest($3.8{\pm}0.9mm$) at 2nd molar and thinnest ($2.5{\pm}0.3mm$) mandibular foramen um 3. The distance from the mandibular canal to the medial aspect of the lingual cortical plate was not significant at any sections. 4. The distance from the mandible canal to the inferior border of mandible was greatest at the mandibular foramen($20.7{\pm}3.9mm$). The canal was located more closely to the inferior border at 1st, 2nd molar area 5. The diameter of the mandibular canal was between $2.5{\pm}0.3mm$ and $2.8{\pm}0.6mm$. 6. The total mandibular thickness was greatest($21.1{\pm}2.6mm$) at 2nd molar area and narrowest($17.2{\pm}3.2mm$) at mandibular foramen area.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.4
• /
• pp.391-399
• /
• 2005

This paper deals with the survey of domestic hydrogen production, consumption, and distribution. The amount of domestic hydrogen production and consumption has not been identified, and we survey the amount of domestic hydrogen production and consumption by industries. The hydrogen production industries are classified into the oil industry, the petrochemical industry, the chemical industry, and the other industry. In 2004, the amount of domestic hydrogen production was 972,601 ton, which corresponded to 1.9% of the global hydrogen production. The oil industry produced 635,683 ton(65.4%), the petrochemical industry produced 241,970 ton(24.9%), the chemical industry produced 66,250 ton(6.8%), the other industry produced 28,698 ton(2.9%). The hydrogen consumptions of corresponding industries were close to the hydrogen productions of industries except that of the other industry. Most hydrogen was used as non-energy for raw materials and hydrogen additions to the process. Only 122,743 ton(12.6%) of domestic hydrogen was used as energy for heating boilers. In 2004, 47,948 ton of domestic hydrogen was distributed. The market shares of pipeline, tube trailers and cylinders were 84.4% and 15.6%, respectively. The purity of 31,848 ton(66.4%) of the distributed hydrogen was 99.99%, and 16,100 ton(33.6%) was greater than or equal to 99.999%. Besides domestic hydrogen, we also identify the byproduct gases which contain hydrogen. The iron industry produces COG( coke oven gas), BFG(blast furnace gas), and LDG(Lintz Donawitz converter gas) that contain hydrogen. In 2004, byproduct gases of the iron industry contained 355,000 ton of hydrogen.

• The Korean Journal of Community Living Science
• /
• v.22 no.4
• /
• pp.599-613
• /
• 2011

This study aimed to provide an efficient time management scheme for farmers by analysing how they experience time constraints in spending their time and understand time management. Firstly, farmers found that they didn't have enough time for farm keeping as a result of house work obligations. It was caused by excessive time for agricultural work. Thus, 93.7% of respondents recognized that ‘they were pressed for time' because there is relatively less time to spend for socio-cultural and physiological matters. In addition, 83.0% responded that they felt the pressure of something. Respondents who were in forties reduced their sleeping hours due to lack of time. The majority of people who were in the farmhouse doing controlled horticulture cannot enjoy their own time for leisure owing to a lack of time. Secondly, respondents under thirty-nine years of age were solving the problems of time constraints as prioritizing matters, planning handling time and utilizing household instruments. On the other hand, respondents who were in forties found the solution by reflecting on their conduct toward a time consumption plan, self-evaluation and received help from their family and/or neighbors. A group of respondents who had already graduated from college or higher education often reflected on their conduct and self-evaluated. Respondants who participatied in farmhouse controlled horticulture, generally took turns in managing their house work. For reducing farmers' time constraints and managing their time efficiently, they should standardize matters done repeatedly and also manage time by dividing work among family members. Furthermore, if a long-term time scheme such as more than a month is established and practiced, time constraints may be somewhat solved.

• Smart Structures and Systems
• /
• v.17 no.2
• /
• pp.167-194
• /
• 2016

This paper investigates the Synergetics based Damage Detection Method (SDDM) for frame structures by using surface-bonded PZT (Lead Zirconate Titanate) patches. After analyzing the mechanism of pattern recognition from Synergetics, the operating framework with cooperation-competition-update process of SDDM was proposed. First, the dynamic identification equation of structural conditions was established and the adjoint vector (AV) set of original vector (OV) set was obtained by Generalized Inverse Matrix (GIM).Then, the order parameter equation and its evolution process were deduced through the strict mathematics ratiocination. Moreover, in order to complete online structural condition update feature, the iterative update algorithm was presented. Subsequently, the pathway in which SDDM was realized through the modified Synergetic Neural Network (SNN) was introduced and its assessment indices were confirmed. Finally, the experimental platform with a two-story frame structure was set up. The performances of the proposed methodology were tested for damage identifications by loosening various screw nuts group scenarios. The experiments were conducted in different damage degrees, the disturbance environment and the noisy environment, respectively. The results show the feasibility of SDDM using piezoceramic sensors and actuators, and demonstrate a strong ability of anti-disturbance and anti-noise in frame structure applications. This proposed approach can be extended to the similar structures for damage identification.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.161-168
• /
• 2007

In this paper, the floating body with double barriers is introduced with a study on the flow patterns and characteristics in around the floating body by using 2 frame p article tracking method. This paper introduce an analisys method to predict the characteristics of flow around the neighbording fields of Floating Body with double barriers in order to investigate a high performance model. Flow visualization has conducted in a circulating water channel by a high speed camera and etc. Flow phenomena according to velocity distribution and flow separation around the floating body with double barriers were obtained by two-dimensional PIV system.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.169-174
• /
• 2007

The purpose in having a control rod an a buoy system is to control the motion of it. The system may be composed entirely af a single circular cylinder finder and a lang mooring anchor cable. A control rod has one function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of the effects of mutual interference, then determine the stability characteristics of the body. In this paper, the study of control-rod-attached buoy's 2-dimensional section was accomplished. model tests and numerical simulations had been carried out with different diameters of control rods. and varying the Reynolds number $Re=5,000{\sim}25,000$ based an the cylinder diameter(D=50mm) to. predict the performance af the body and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flaw field 50mm circular cylinder had been used during the whale experiments and measured results had been compared with each other.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.6
• /
• pp.275-286
• /
• 2014

Light shelf is an efficient system that reduces the energy consumption by bringing the natural light down to the deep spaces inside of a building. However, the existing light shelves have limits in reducing energy usage, because the direction of the light flow is determined by the external environment such as the altitude of the sun and the azimuth. This current study presents a system that increases the efficiency of the light shelf by applying the Location-Awareness technology, in which the efficiency was verified through the performance evaluation. According to the examination of the technology for the Location-Awareness within residential space, 'Zigbee' type appears to be the most appropriate. The Location-Awareness technology operates the light shelf based on both the angle control axis and the light shelf angle control axis through the modularization of the reflector surface which is less affected by the external environment. The results of the performance evaluation showed that the movable light shelf that employs the Location-Awareness technology can reduce the energy consumption for lighting by 98.3% compared to the fixed light shelf and by 97.3% compared to the movable light shelf without Location-Awareness.