• Title/Summary/Keyword: GI trouble

Search Result 45, Processing Time 0.023 seconds

Characteristics of Radiated Electromagnetic Waves in Model GIS with Electrical Trouble and Design of Insulted Diagnosis UHF Sensor (모의 GIS의 전기적 이상에 따른 방사전자파의 특성과 절연진단용 UHF 센서 설계)

  • Park, Kwang-Seo
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.22 no.5
    • /
    • pp.47-52
    • /
    • 2008
  • In this paper partial discharge were simulated by conducted particle, a fine protrusion, surface discharge, which could be easy accumulated charge and concentrated electric field in the model GIS. In this times this paper measured and analyzed the radiated electromagnetic waves by using spectrum analyzer and antenna ($30{\sim}2,000[MHz]$ for measurement of EMI EMC in accordance with occurrence and propagation of partial discharge. In the basis of this results, a novel UHF(Ultra High Frequency) spherical sensor is presented. The measured impedance bandwidth of the proposed antenna is from 0.3[GHz] to 1.7[GHz]. Form results of this study, this antenna will be playing an important role for the sensor for insulation diagnosis system by UHF method of real site GIS and power equipment using $SF_6$ gas.

Health Problems and Work impairment in Nurses Working at Community Health Centers (보건소 근무 간호사의 건강문제와 업무성과 손실)

  • Cho, Chung-Min;Kim, Kyu-Sung;Kim, Mee-Hye
    • Journal of Korean Public Health Nursing
    • /
    • v.23 no.1
    • /
    • pp.69-77
    • /
    • 2009
  • Purpose: This study was conducted to investigate health problems and factors related to work impairment of nurses working at community health centers. Method: Data were collected from May 2008 to July 2008 using a structured, self - reported questionnaire for general characteristics, work-related characteristics, health problems and work impairment. The subjects were composed of 434 nurses from 25 community health centers in Seoul. Data were analyzed by descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient and multiple regression analysis. Results: For present health problems, shoulder, back and neck pain were ranked the highest at (54.6%), followed by cold, GI trouble, and visual disorders. The average score of work impairment was 24.71($\pm7.14$) out of 50.0. Multiple regression analysis revealed that the major factors that affect work impairment were age and number of health problems, and that these factors explained 15% of the work impairment. Conclusion: Age and number of health problems are the factors that have the greatest influence on work impairment. These findings indicate that the health condition of nurses at community health centers must be considered to improve the overall quality of nursing service.

Development of Bioelectric Signal Sensor System using Band Type ECG (밴드형 심전도 생체신호 전극시스템의 구현)

  • Kang Sung-Chul;Kim Gi-Ryon;Kim Kwang-Nyeon;Jung Dong-Keun;Kim Min-Sung;Jeong Do-Wun;Jeon Gye-Rok
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2006.05a
    • /
    • pp.1023-1026
    • /
    • 2006
  • There are some cases in trouble with monitoring emergency patient by existing electrode sensor in measuring instrument in home and hospital etc. And there are problem to measure because of coming down electrode in emergency car or vessel of shaking and fat, humidity of patient. In this study, it has designed band-type for patient to put on the breast easily and go around anywhere freely putting band electrode on his body. Gold has used as electrode material in this electrocardiogram because of its excellent electronic resistance peculiarity and no trouble with skin. And it is able to monitor multi-body-signal by additional design of periphery temperature. There are good results of body signal transmission in the breast or the rib, and get a little body signal in abdomen. We get a result it is better case of gold than usual electrode on signal detection, and know usual electrode was disposable, but we have more correct result from gold electrode sensor, being semi-permanent ana. great contact ability even if movement.

  • PDF

An Emergency Message Propagation Method with Stem and Branch Structure for Vehicle Safety Communication (차량안전통신을 위한 줄기와 가지 구조를 이용한 긴급 메시지 전파 방법)

  • Yu, Suk-Dea;Cho, Gi-Hwan
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.2A
    • /
    • pp.203-212
    • /
    • 2007
  • An advanced vehicle safety system can be constructed by exchanging danger-related information ,such as urgency stop, traffic accident, obstacle, and car trouble, among the vehicles. However, because network topology changes rapidly and frequently due to the mobility of vehicles, it is impossible to configure the network for information forwarding in this environment. In the most of vehicle safety communication applications, an emergency message is propagated in a form of broadcasting. The simple broadcasting causes a lot of problems in terms of efficiency due to multi-hop area and radio collision problem. This paper proposes a method of selective message forwarding with stem and branch structure for propagating the emergency messages. However, the proposed method raise the efficiency of message transmission with the selective forwarding based on the priority assignment as its location. We analyze and evaluate the performance by comparing the proposed scheme with other schemes that are presented in the paper.

Reduction Method based on Sub-domain Structure using Reduced Pseudo Inverse Method (축소 의사역행렬과 영역분할 기반 축소모델 구축 기법 연구)

  • Kim, Hyun-Gi;Cho, Meang-Hyo
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2009.04a
    • /
    • pp.139-145
    • /
    • 2009
  • Reduction scheme is remarkably useful in the case requiring the repeated calculation procedure. Recently, the efficiency of the reduction scheme has been improved by combining scheme of sub-domain method. But, when the global domain is partitioned into a few sub-domains, sub-domains without constraints can be produced. it is needed to extract the ritz vector from each sub-domain to construct the reduced system of each sub-domain. it is easy to extract the ritz vector from sub-domain with constraint. on the other hand, pseudo inverse method should be employed to extract the ritz vector from sub-domain without constraint. generally, the pseudo inverse takes a large number of computing time to obtain a reduced system of a sub-domain without boundary condition. This trouble can be overcome by the reduced pseudo inverse scheme which proposed in this study. This scheme is based on the static condensation that is not related with selection of the primary degrees of freedom. Numerical examples demonstrate that present method saves computational cost effectively and predicts the accurate eigenvalues.

  • PDF

Tuberculous Cervical Lymphadenitis (경부 결핵성 임파선염)

  • Kim Joong-Kyu;Lee Choong-Han
    • Korean Journal of Head & Neck Oncology
    • /
    • v.11 no.1
    • /
    • pp.3-8
    • /
    • 1995
  • Tuberculous cervical lymphadenitis is one of common cause of neck mass in young adult in Korea. Tuberculous cervical lymphadenitis known as scrofula was being treated by the 'Royal Touch' in the 5th century and by surgery in the 17th century, yet the principle of the treatment is still controversal. We report the clinical evaluation and therapeutic result about 121 tuberculous cervical lymphadenitis. The result were as follows: 1) The annual incidence(1985-1994) was 30.5 % (37 cases: 1985-1986), 17.7 % (21 cases: 1990-1992). 19.8%(24 cases: 1994). 2) The age of highest incidence was 20-29 year old age group in 41.3% (50 cases) and female predominated over male by 1.8 : 1. 3) The duration of disease was less than 6 months, in 85.9% (104 cases). 4) The most commonly involved LN group was superficial cervical group in 69.4% (84 cases), and difference between Rt & Lt, was not significant. 5) The most common symptom and local finding(P/E) were, painless swelling of LN in 74.3 % (90 cases) and single mass in 59.5 % (72 cases). 6) In seasonal variation, 85.9% (104 cases) was spring and summer. 7) Procedures except biopsy for evaluation were chest PA, AFB smear & culture(sputum), Mantoux test, USG, CT and, Associated extracervical tuberculous lesions were lung, axilla, breast. 8) In operation method (involving biopsy), Excision was 68.5 % (83 cases), neck dissection was 6.6% (8 cases). 9) The Modality, Duration and side effect of antituberculous medication: INH-Rifampin­Ethambutol was 66.1 % (88 cases), duration was 1 year in 84.3% (102 cases), side effects were severe GI trouble (24.8%), liver function damage (3.3%). 10) 3 cases recurred on the same site after 2 yrs(2 cases) and 4 months(1 case) and its treatment was curretage or I & D, with antituberculous medication.

  • PDF

Reduction Method based on Sub-domain Structure using Reduced Pseudo Inverse Method (축소 의사역행렬을 이용한 영역분할 기반 축소모델 구축기법 연구)

  • Kim, Hyun-Gi;Cho, Maeng-Hyo
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.22 no.2
    • /
    • pp.173-179
    • /
    • 2009
  • Reduction scheme is remarkably useful in the case requiring the repeated calculation procedure. Recently, the efficiency of the reduction scheme has been improved by combining scheme of sub-domain method. But, when the global domain is partitioned into a few sub-domains, sub-domains without constraints can be produced. it is needed to extract the ritz vector from each sub-domain to construct the reduced system of each sub-domain. it is easy to extract the ritz vector from sub-domain with constraint. on the other hand, pseudo inverse method should be employed to extract the ritz vector from sub-domain without constraint. generally, the pseudo inverse takes a large number of computing time to obtain a reduced system of a sub-domain without boundary condition. This trouble can be overcome by the reduced pseudo inverse scheme which proposed in this study. This scheme is based on the static condensation that is not related with selection of the primary degrees of freedom. Numerical examples demonstrate that present method saves computational cost effectively. In addition, it is shown that the reduced system based on the proposed scheme predicts the accurate eigenvalues of global system.

Building and Utilizing the Geographic Information for Analyzing the Change of Regional Environment in Dam Construction Area (댐 수몰지역의 환경변화 분석을 위한 지리정보지 구축 및 활용)

  • 김항집;최동호
    • Spatial Information Research
    • /
    • v.7 no.1
    • /
    • pp.133-146
    • /
    • 1999
  • Generally, to carry out environmental impact assessment(EIA) for a dam construction, enormous environment data should be collected and managed using scientific methods. But greatness of the area, hugeness of environmental data and deficiency of proper analysis tool caused a trouble in environmental data management and EIA More efficient assessment tool is needed in EIA Therefore this research uses GIS for systematic management of the environment factors, and ante-assessment and post-assessment for environmental impact of dam construction. For this purpose, environmental database of related environmental factors were built and by using GIS more efficient EIA was carried out. The results of this research show that systematic EIA data management and efficient environment analysis can be possible by using GIS. Graphic representation of the analysis results makes it possible for more easy understanding to the residents and decision-makers. This development of environmental information system has showed the methodology of more efficient EIA.

  • PDF

Development of Subsurface Spatial Information Model System using Clustering and Geostatistics Approach (클러스터링과 지구통계학 기법을 이용한 지하공간정보 모델 생성시스템 개발)

  • Lee, Sang-Hoon
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.11 no.4
    • /
    • pp.64-75
    • /
    • 2008
  • Since the current database systems for managing geotechnical investigation results were limited by being described boring test result in point feature, it has been trouble for using other GIS data. Although there are some studies for spatial characteristics of subsurface modeling, it is rather lack of being interoperable with GIS, considering geotechnical engineering facts. This is reason for difficulty of practical uses. In this study, we has developed subsurface spatial information model through extracting needed geotechnical engineering data from geotechnical information DB. The developed geotechnical information clustering program(GEOCL) has made a cluster of boring formation(and formation ratio), classification of layer, and strength characteristics of subsurface. The interpolation of boring data has been achieved through zonal kriging method in the consideration of spatial distribution of created cluster. Finally, we make a subsurface spatial information model to integrate with digital elevation model, and visualize 3-dimensional model by subsurface spatial information viewing program(SSIVIEW). We expect to strengthen application capacity of developed model in subsurface interpretation and foundation design of construction works.

  • PDF

A Study for Introducing a Method of Detecting and Recovering the Shadow Edge from Aerial Photos (항공영상에서 그림자 경계 탐색 및 복원 기법 연구)

  • Jung, Yong-Ju;Jang, Young-Woon;Choi, Yun-Woong;Cho, Gi-Sung
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.24 no.4
    • /
    • pp.327-334
    • /
    • 2006
  • The aerial photos need in a simple object such as cartography and ground cover classification and also in a social objects such as the city plan, environment, disaster, transportation etc. However, the shadow, which includes when taking the aerial photos, makes a trouble to interpret the ground information, and also users, who need the photos in their field tasks, have a restriction. Generally the shadow occurs by the building and surface topography, and the detail cause is by changing of the illumination in an area. For removing the shadow this study uses the single image and processes the image without the source of image and taking situation. Also, applying the entropy minimization method it generates the 1-D gray-scale invariant image for creating the shadow edge mask and using the Canny edge detection creates the shadow edge mask, and finally by filtering in Fourier frequency domain creates the intrinsic image which recovers the 3-D color information and removes the shadow.