• Journal of the Korean Chemical Society
• /
• 제43권6호
• /
• pp.663-669
• /
• 1999

For determination of separated pesticides by using GC and HPLC, liquid-liquid extraction(LLE) and solid phase extraction(SPE) have been carried out to separate and concentrate the organophophorous pesticides such as Diazinon, Fenitrothion, Phosmet, Phosalon and EPN in environmental water samples. ln determination of pesticides by HPLC/UV, SPE has resulted in higher recovery and more precision than LLE, while in determination of pesticides by GC/FPD, vice versa. HPLC/UV after the pretreatment process of sample by solid phase extraction (SPE-HPLC/UV) has suggested the possibility of determination of pesticides ppb level. ln comparison of detection limit, both SPE-HPLC/UV and LLE-GC/FPD are reasonably suitable for analysis of residue pesticides. ln the respect of the rapidity and the solvent required, SPE-HPLC/UV method has proven to be superior to LLE-GC/FPD.

• Journal of Environmental Science International
• /
• 제13권10호
• /
• pp.903-909
• /
• 2004

A new method based on solid phase microextraction(SPME), coupled with GC/FID, has been developed for the determination of PCE and TCE in water samples. The experimental parameters affecting the SPME process (i.e, kinds of fibers, extraction time, desorption time, extraction temperature, volume ratio of sample to headspace, salt addition, and magnetic stirring) were optimized. The coefficients of determination ($R^2$) for PCE and TCE were 0.9951 and 0.9831, respectively when analytes concentration ranges from 10 to 300$\mu$g/L. The relative standard deviations were 3.4 and $2.1\%$ for concentration of 10$\mu$g/L(n=5), respectively. The detection limits of PCE and TCE were 0.5 and l.3$\mu$g/L, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3123-3127
• /
• 2010

A highly sensitive electrochemical detection method for dopamine (DA) has been developed by relying on a multiwalled carbon nanotube (CNT)-sol-gel titania-Nafion composite film modified glassy carbon (GC) electrode. The CNT-titania-Nafion/GC electrode exhibited excellent electrocatalytic activity towards DA. Therefore, the CNT-titania-Nafion/GC electrode showed improved voltammetric and amperometric responses for DA compared to those obtained with both titania-Nafion/GC and Nafion/GC electrodes. The CNT-titania-Nafion/GC electrode gave a linear response ($R^2$ = 0.999) for DA from $0.5\;{\mu}M$ to 0.5 mM with a detection limit (S/N = 3) of $0.1\;{\mu}M$ and a good sensitivity of 150 mA/M while other electrodes such as CNT-Nafion/GC, titania-Nafion/GC, and a bare GC gave a sensitivity of 89, 39, and 36 mA/M, respectively. Besides, the CNT-titania-Nafion/GC electrode displayed very fast response time within 2 s. The modified electrode showed good selectivity against ascorbic acid. The modified electrode showed good stability and reproducibility. The CNT-titania-Nafion/GC electrode was applied to the determination of DA in urine and serum samples.

• Journal of Pharmaceutical Investigation
• /
• 제15권3호
• /
• pp.151-159
• /
• 1985

For the determination of aliphatic carbamates, the quantitative analysis of carisoprodol was investigated by gab chromatography (GC) and spectrophotometry. All the methods studied were found to be very quantitative. The minimum experimental amounts of GC method, spectrophotometric method I and II were approximately $10^{-9},\;10^{-5}$ and $10^{-8}$ mole, respectively. The obtained results showed that GC method I was much more sensitive and rapid than spectrophotometric method II.

• KSBB Journal
• /
• 제18권1호
• /
• pp.74-77
• /
• 2003

A simple, reproducible, and rapid gas chromatographic method for putrefactive metabolite determination in feces was developed. The method involves the direct injection of fecal supernatants into the gas chromatograph, without pretreatment. The mass spectra of these metabolites were obtained using an HP 5971 mass selective detector operated in electron impact (EI) ionization mode. This method produced sharp peaks and allowed the simultaneous determination of fecal putrefactive metabolites.

• Analytical Science and Technology
• /
• 제32권3호
• /
• pp.88-95
• /
• 2019

This study was conducted to establish the analytical method for the determination of cyanide in blood, urine, lung and skin tissues in rats. In order to detect or quantify the sodium cyanide in above biological matrixes, it was derivatized to Pentafluorobenzyl cyanide (PFB-CN) using pentafluorobenzyl bromide (PFB-Br) and then reaction substance was analyzed using gas chromatography mass spectrometer (GC/MS)-SIM (selected ion monitoring) mode. The analytical method for cyanide determination was validated with respect to parameters such as selectivity, system suitability, linearity, accuracy and precision. No interference peak was observed for the determination of cyanide in blank samples, zero samples and lower limit of quantification (LLOQ) samples. The lowest limit detection (LOD) for cyanide was $10{\mu}M$. The linear dynamic range was from 10 to $200{\mu}M$ for cyanide with correlation coefficients higher than 0.99. For quality control samples at four different concentrations including LLOQ that were analyzed in quintuplicate, on six separate occasions, the accuracy and precision range from -14.1 % to 14.5% and 2.7 % to 18.3 %, respectively. The GC/MS-based method of analysis established in this study could be applied to the toxicokinetic study of cyanide on biological matrix substrates such as blood, urine, lung and skin tissues.

• YAKHAK HOEJI
• /
• 제30권4호
• /
• pp.180-184
• /
• 1986

Such carboxyl drugs as mefenamic acid, alclofenac, ketoprofen, cicloxilic acid and tolfenainic acid in rat plasma were determined by the gas chromatography flame photometric detector (GC-FPD). After methylthiomethyl (MTM) esterification with MTM-chloride in 1, 8-diazabicyclo [5.4.0] undec-7-ene (DBU) catalyst, determination of these drugs by this method was tried and compared with that by the GC-flame ionization detector (FID) method in respect to sensitivity and effect of inteferences. The results showed it was possible to analyze with accuracy by this method because of specificity of the FPD, although these drugs were not separated from interferences in plasma on GC column. The GC-FPD method was more sensitive than GC-FID method and the minimum detectable amount of monocarboxylic drugs on 3%, QF-1 column was about 15fmol/injection.

• Archives of Pharmacal Research
• /
• 제4권2호
• /
• pp.85-90
• /
• 1981

A quantitative GC-MS spectrometric assay was used for the determination of residual N, N-dimethylaniline as a contaminant in commercial penicillin derivatives from various sources. The assay utilizes selective ion focusing to monitor in a GC effluent the molecular ions of DMA generated by electron impact ionization. This method includes dissolution of the sample in alkaline solution, extraction of organic base with cyclohexane and injection into GC-MS with a 3% OV-17 column. Levels of 50 ppb of DMA were easily measured with a coeffecient of varation less than 5 % and recoveries from spiked samples exceeded 97 %. The results of the determinations of DMA in various commercial penicillins were relatively free of this contaminant.

• Bulletin of the Korean Chemical Society
• /
• 제22권10호
• /
• pp.1141-1144
• /
• 2001

• Journal of the Korean Institute of Gas
• /
• 제23권4호
• /
• pp.46-64
• /
• 2019

Technical practice code, KGS GC101 2018, for explosion hazard area selection and distance calculation of gas facility was enacted and implemented from July 12, 2018. This code includes whole contents of IEC60079-10-1 2015 (Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheres), and clarifies the interpretation of ambiguous standards or adds guidelines for standards. KGS GC101 is a method for classifying explosion hazard place types: (1) Determination of leak grade (2) Determination of leakage hole size (3) Determination of leakage flow (4) Determination of dilution class (5) Determination of ventilation effectiveness, finally (6) Determination of danger place (7) Explosion The range of dangerous places can be estimated. In order to easily calculate this process, the program (KGS-HAC v1.14, C-2018-020632) composed by Visual Basic for Application (Excel) language was produced by Korea Gas Safety Corporation. We will discuss how to use codes and programs to select and set up explosion hazard zones for field users.