• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.60-66
• /
• 2005

When external pressure higher than osmosis pressure is reversely derived into solution, its solvent is moved into the solution having lower concentration, which is called 'reverse osmosis'. We investigated the desalination application of deep ocean water using reverse osmosis pressure of $40-70\;kgf/cm^2$ We observed how to operational factor j like flow rate, water temperature and pressure have effect on efficiency of reverse osmosis membrane and salts rejection. Fluxes of reverse osmosis membrane are directly proportional to water temperature and pressure. However, salts rejection rates are positively correlated with pressure and inversely proportional to water temperature. Separation efficiencies of osmosis membrane for major elements such as $Mg^{2+},\;Ca^{+2},\;Na^+\;and\;K^+$ are as follows in a strong electrolysis solution like seawater; $Ca^{2+},\;Mg^{2+}>K^+>Na^+$. Rejection rates of $Mg^{2+}\;and\;Ca^{2+}$ that have high electric charges are over 99% and show positively correlation with water temperature. Rejection rates of $Na^+$ having low electric charge is observed to be 98%-99%, which rates is much lower than those of $2^+$ charged ions like $Ca^{2+}\;and\;Mg^{2+}$. Ion rejection rates of boron, B, are much low because boron is present il free state or gas phase in seawater. Boron concentration in desalination water is over criteria of Korean drinking water, 0.3 mg/L. However, we could satisfied with the criteria of drinking water under the operation condition like temperature $5^{\circ}C$ and pressure $70kgf/cm^2$, using the relationship that rejection rates of boron is proportional to pressure and is inversely proportional to water temperature

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1256-1264
• /
• 2011

Infant formula is one of the main nutritional sources for infants. In this study, the fatty acid compositions of Korean (domestic, n=8) and foreign infant formulas (n=3) were analyzed. Crude fats were extracted using the Folch method, and fatty acid compositions (total and positional) were analyzed by gas chromatography. In the fatty acid compositions of infant formulas, oleic (19.88~44.64%), palmitic (7.59~21.65%) and linoleic acids (16.72~25.87%) were the major fatty acids. Domestic infant formula products contained 35.94~56.55% total saturated fatty acid content, whereas that of foreign infant formula ranged from 34.40~42.88%. The content of monounsaturated fatty acids ranged from 20.23~44.99% in domestic products and 34.11~45.07% in foreign products. In addition, 0.17~2.57% arachidonic acid/docosahexaenoic acid and 10~13% linoleic acid/linolenic acid were detected in the analyzed products (domestic and foreign products). A small amount of trans fatty acids (0.25~1.69%) were found. In sn-2 position analysis, palmitic acids (1.84~38.74%) were detected in the analyzed formulas. Further, typical triacylglycerols in human milk, including 1,3-di-monounsaturated-2-saturated triacylglycerol, were not detected in the analyzed formulas.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.5
• /
• pp.285-292
• /
• 2008

To investigate the effect of tillage methods on the silage barely growth and the soil environment in paddy field, liquid pig manure(LPM) was applied after harvesting rice at Jisan series soil for 2 years. Five plots, a LPM applied rate as N%; 0, 100, 150, 200(basal dressing) and 100(basal dressing)+50(additional fertilizer) were divided by tillage methods; non-tillage, non-tillage+rice straw and rotary tillage method. Emission amounts of $NH_3$ gas highly decreased in the rotary tillage and the non-tillage+rice straw plot compared to non-tillage plot. The contents of soil organic matter and exchangeable cation were increased in the applied LPM plot. $NH_4-N$ and $NO_3-N$ contents in soil were the highest in the non-tillage+rice straw plot and followed by the rotary tillage and highly decreased along with the growth of plant. Run-off rate of mineral components were higher in order of the rotary tillage plot£æthe non-tillage plot£æthe non-tillage+rice straw plot and then leached to $SO_4$, $NO_3-N$, K plentifully. The yield of silage barley in dry weight was higher in order of the non-tillage+rice straw plot>the rotary tillage plot>the non-tillage plot. To estimate the feed value of silage barley, crude protein, acid detergent fiber(ADF) and neutral detergent fiber(NDF) contents were analyzed. Crude protein and ADF contents were the highest at rotary tillage N150% plot as 9.7 and 29.4%, respectively. NDF contents was the highest at non-tillage+rice straw N150% plot as 56.7%. In conclusion, we recommend not to incinerate rice straw and to apply LPM at non-tillage status in cultivating the silage barley. This may prevent water pollution and increase barley yields.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1758-1763
• /
• 2012

This study was conducted to compare fragrance and volatile chemicals of essential oils in Gom-chewi (Ligularia fischeri) and Handaeri Gom-chewi (Ligularia fischeri var. spicifoprmis). Essential oils were extracted by steam distillation of leaves of Gom-chewi (GC) and Handaeri Gom-chewi (HGC), after which samples were collected by solid-phase micro extraction and the compositions of the essential oils were analyzed by gas chromatography-mass spectrometry (GC-MS). The yields of the essential oils in GC and HGC were 0.12% and 0.04%, respectively, and the threshold levels of the essential oils in GC and HGC were 0.01% and 0.1%, respectively. There were 19 constituents of the essential oil of Gom-chewi: 14 carbohydrates, 4 alcohols, and 1 acetate, and the major constituents were L-${\beta}$-pinene (36.02%), D-limonene (25.64%), ${\alpha}$-pinene (24.85%) and ${\beta}$-phellandrene (5.39%). In the essential oil of HGC, 25 constituents were identified: 17 carbohydrates, 4 alcohols, 3 acetates, and 1 N-containing compound, and the major constituents of HGC were D-limonene (39.74%), L-${\beta}$-pinene (35.43%) and ${\alpha}$-pinene (11.94%). The minor constituents of HGC were ${\rho}$-cymene, ${\gamma}$-muurolene, ${\gamma}$-cadinene, germacrene D, ingol 12-acetate and butyl 9,12,15-octadecatriene and nimorazole were not identified in the GC essential oil. Overall, the results showed that the fragrance and chemical compositions of essential oils in GC and HGC differed, suggesting that both essential oils could be used for the development of perfumery products.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.115-124
• /
• 2020

Sustainable plastics can be mainly categorized into (1) biodegradable plastics decomposed into water and carbon dioxide after use, and (2) biomass-derived plastics possessing the carbon neutrality by utilizing raw materials converted from atmospheric carbon dioxide to biomass. Recently, biomass-derived engineering plastics (EP) and natural nanofiber-reinforced nanocomposites are emerging as a new direction of the industry. In addition to the eco-friendliness of natural resources, these materials are competitive over petroleum-based plastics in the high value-added plastics market. Polyesters and polycarbonates synthesized from isosorbide and 2,5-furandicarboxylic acid, which are representative biomass-derived monomers, are at the forefront of industrialization due to their higher transparency, mechanical properties, thermal stability, and gas barrier properties. Moreover, isosorbide has potential to be applied to super EP material with continuous service temperature over 150 ℃. In situ polymerization utilizing surface hydrophilicity and multi-functionality of natural nanofibers such as nanocellulose and nanochitin achieves remarkable improvements of mechanical properties with the minimal dose of nanofillers. Biomass-derived tough-plastics covered in this review are expected to replace petroleum-based plastics by satisfying the carbon neutrality required by the environment, the high functionality by the consumer, and the accessibility by the industry.

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.20-24
• /
• 2013

Food irradiation has recently become one of the most successful techniques to preserve food with increased shelf life. This study aims to analyze hydrocarbons in almonds (Prunus amygosalus L.) and peanuts (Arachis hypogaea) induced by electron beam irradiation. The samples were irradiated at 0, 1, 3, 5 and 10 kGy by e-beam and using florisil column chromatography fat, and content was extracted. The induced hydrocarbons were identified using gas chromatography-mass spectrometry (GC/MS). The major hydrocarbons in both irradiated samples were 1,7-hexadecadiene ($C_{16:2}$) and 8-heptadecene ($C_{17:1}$) from oleic acid, 1,7,10-hexadecatriene ($C_{16:3}$) and 6,9-heptadecadiene ($C_{17:2}$) from linoleic acid and 1-tetradecene ($C_{14:1}$) and pentadecane ($C_{15:0}$) from palmitic acid. Concentrations of the hydrocarbons produced by e-beam were found to be depended upon the composition of fatty acid in both almonds and peanuts. The $C_{n-2}$ compound was found to be higher than $C_{n-1}$ compound in oleic acid and palmitic acid, while in case of linoleic acid, $C_{n-1}$compound was higher than $C_{n-2}$ compound. The radiation induced hydrocarbons were detected only in irradiated samples, with 1 kGy or above, and not in the non-irradiated ones. The production of 1,7-hexadecadiene ($C_{16:2}$), 8-heptadecene ($C_{17:1}$), 1,7,10-hexadecatriene ($C_{16:3}$) and 6,9-heptadecadiene ($C_{17:2}$), in high concentration gave enough information to suggest that these may be the possible marker compounds of electron beam irradiation in almonds and peanuts.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.647-657
• /
• 2015

To investigate a method for calculation of the heating load for environmental designs of horticultural facilities, measurements of total heating load, infiltration rate, and floor heat flux in a large-scale plastic greenhouse were analyzed comparatively with the calculation results. Effects of ground heat exchange and infiltration loss on the greenhouse heating load were examined. The ranges of the indoor and outdoor temperatures were $13.3{\pm}1.2^{\circ}C$ and $-9.4{\sim}+7.2^{\circ}C$ respectively during the experimental period. It was confirmed that the outdoor temperatures were valid in the range of the design temperatures for the greenhouse heating design in Korea. Average infiltration rate of the experimental greenhouse measured by a gas tracer method was $0.245h^{-1}$. Applying a constant ventilation heat transfer coefficient to the covering area of the greenhouse was found to have a methodological problem in the case of various sizes of greenhouses. Thus, it was considered that the method of using the volume and the infiltration rate of greenhouses was reasonable for the infiltration loss. Floor heat flux measured in the center of the greenhouse tended to increase toward negative slightly according to the differences between indoor and outdoor temperature. By contrast, floor heat flux measured at the side of the greenhouse tended to increase greatly into plus according to the temperature differences. Based on the measured results, a new calculation method for ground heat exchange was developed by adopting the concept of heat loss through the perimeter of greenhouses. The developed method coincided closely with the experimental result. Average transmission heat loss was shown to be directly proportional to the differences between indoor and outdoor temperature, but the average overall heat transfer coefficient tended to decrease. Thus, in calculating the transmission heat loss, the overall heat transfer coefficient must be selected based on design conditions. The overall heat transfer coefficient of the experimental greenhouse averaged $2.73W{\cdot}m^{-2}{\cdot}C^{-1}$, which represents a 60% heat savings rate compared with plastic greenhouses with a single covering. The total heating load included, transmission heat loss of 84.7~95.4%, infiltration loss of 4.4~9.5%, and ground heat exchange of -0.2~+6.3%. The transmission heat loss accounted for larger proportions in groups with low differences between indoor and outdoor temperature, whereas infiltration heat loss played the larger role in groups with high temperature differences. Ground heat exchange could either heighten or lessen the heating load, depending on the difference between indoor and outdoor temperature. Therefore, the selection of a reference temperature difference is important. Since infiltration loss takes on greater importance than ground heat exchange, measures for lessening the infiltration loss are required to conserve energy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.969-977
• /
• 2001

The purpose of this study was to investigate disinfection state and effective factors of utensils and equipments used to foodservice of elementary schools in Busan area, The questionnaire which was administered to 160 dietitians was used in this study as a survey method. The results were as follows. The disinfection method of tray was mainly used by electric gas. Table and other products of stainless steel sanitized by sodium hypochlorite and hot water, but above 51% of slicer. grinder and peeler were not sanitized after used. The products of wood and plastic also used mainly sodium hypochlorite and hot water as sanitizers. In disinfection time, knife, wood spoon and plastic products should be sanitized on demand, but 30.9~53.5% of this utensils except rice scoop were sanitized on demand that showed deficiency of cognition for sanitation. The disinfection of most of utensils and equipments was conducted every day, but food case, slicer, peeler, grinder and wood spoon showed lower disinfection frequency than other products, The method of disinfection was related to dietitians age and career number of total serving, duration of foodservice and serving place, The disinfection time was also affected by dietitians age and educational level, and serving place. The disinfection frequency was affected by number of employee, number of total serving and duration of foodservice. Therefore based on the results of this study, it should be given to the microbiological study on disinfection method of utensils such as slicer, grinder, peeler, large spoon, plastic prouducts and the dietitians sanitation training also should be conducted continuously.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.74-78
• /
• 2018

Purpose $[^{11}C]$acetate has been proved useful in detecting the myocardial oxygen metabolism and various malignancies including prostate cancer, hepatocellular carcinoma, renal cell carcinoma and brain tumors. The purpose of study was to improve the radiosynthesis yield of $[^{11}C]$acetate on a automated radiosynthesis module. Materials and Methods $[^{11}C]$acetate was prepared by carboxylation of grignard reagent, methylmagnesium chloride, with $[^{11}C]$$CO_2$ gas, followed by hydrolysis with 1 mM acetic acid and purification using solid phase extraction cartridges. The effect of the reaction temperature ($0^{\circ}C$, $10^{\circ}C$, $-55^{\circ}C$) and cyclotron beam time (10 min, 15 min, 20 min, 25 min) on the radiosynthesis yield were investigated in the $[^{11}C]$acetate labeling reaction. Results The maximum radiosynthesis yield was obtained at $-10^{\circ}C$ of reaction temperature. The radioactivities of $[^{11}C]$acetate acquired at $-10^{\circ}C$ reaction temperature was 2.4 times higher than those of $[^{11}C]$acetate acquired at $-55^{\circ}C$. Radiosynthesis yield of $[^{11}C]$acetate increased with increasing cyclotron beam time. Conclusion This study shows that radiosynthesis yield of $[^{11}C]$acetate highly dependent on reaction temperature. The best radiosynthesis yield was obtained in reaction of grignard reagent with $[^{11}C]$$CO_2$ at $-10^{\circ}C$. This radiolabeling conditions will be ideal for routine clinical application.