• Journal of Microbiology and Biotechnology
• /
• v.18 no.8
• /
• pp.1439-1444
• /
• 2008

The recombinant E. coli $\Delta$6 mutant (galR, glpK, gldA, IdhA, lacI, tpiA) was used to produce 1,3-propanediol (PD) from glucose. The 1,3-PD production increased with feedback control of the glucose concentration using fed-batch fermentation. The maximum 1,3-PD concentration produced was 43 g/l after 60 h of fermentation. Glycerol production was minimized when controlling the glucose concentration at less than 1 g/l. The expression levels of seven enzymes related to the 1,3-PD production metabolism were compared during the cell growth phase and 1,3-PD production phase, and their expression levels all increased during 1,3-PD production, with the exception of alcohol dehydrogenase.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.490-494
• /
• 2020

Sulphur hexafluoride (SF₆) is mostly used as a current-insulating medium in gas-insulated switchgears (GIS), owing to its excellent dielectric strength and arc-extinguishing performance. The global warming potential (GWP) of SF₆, however, is 23,900 times that of CO₂, and its life time in the atmosphere is 3,200 years. For these reasons, new eco-friendly gases to replace SF₆ are required. In this study, the partial discharge (PD) characteristics of green gas for grid (g³) and dry air (N₂/O₂) were analyzed to compare with those of SF₆. A PD electrode system was designed to simulate the protrusion defect in GISs and fabricated for experimentation. To compare the PD characteristics of each gas, the discharge inception voltage (DIV), discharge extinction voltage (DEV), discharge magnitude, discharge pulse number, and phase pattern were analyzed. Results from this study are expected to provide fundamental materials for the design of eco-friendly GISs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.649-656
• /
• 2015

The protective effect of zinc against cortisol-induced cell injury was examined in rainbow trout gill epithelial cells. Cells exposed to cortisol for 24 h showed increased leakage of lactate dehydrogenase (LDH) as well as decreased cell viability in a dose-dependent manner. Treatment with zinc ($100{\mu}M$ $ZnSO_4$) reduced the severity of both LDH release and cell death as well as protected cells against cortisol-induced caspase-3 activation, indicating reduction of apoptosis. Cortisol-induced cell death, leakage of LDH, and caspase-3 activation were blocked by the glucocorticoid receptor antagonist Mifepristone (RU-486), suggesting that cell injury was cortisol-dependent. In addition, we studied the effect of zinc on the expression of antioxidant genes such as metallothionein A (MTA), metallothionein B (MTB), glutathione-S-transferase (GST), and glucose-6-phosphate dehydrogenase (G6PD) during cortisol-induced cell injury. MTA, MTB, GST, and G6PD mRNA levels increased after treatment with zinc or cortisol, separately or in combination. Higher mRNA levels of MTA, MTB, GST, and G6PD were detected when cells were treated with $100{\mu}M$ $ZnSO_4$ and $1{\mu}M$ cortisol in combination at the same time compared to treatment with zinc or cortisol separately. Cells treated with zinc showed increased intracellular free zinc concentrations, and this response was significantly enhanced in cells treated with cortisol and zinc. In conclusion, zinc treatment inhibited cortisol-induced cytotoxicity and apoptosis through indirect antioxidant action.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.8
• /
• pp.1147-1153
• /
• 2000

A total of 9,540 pigs were evaluated for their growth performance to provide information on the development of different feeding strategies to support maximum rate of protein deposition (PD). Large variations in growth performance and protein deposition rate were found in the population used in this study (ADG from 701 to 974 g/day; ADFI from 1,726 to 2,498 g/day; Feed/gain from 2.10 to 2.90; Backfat thickness from 12.4 to 20.5 mm and PD rate from 103 to 153 g/day). It was found that ADG was positively correlated to PD ($R^2=0.9362$, p<0.0001) while FCR was negatively correlated to PD ($R^2=0.4031$, p<0.0001). Backfat thickness was negatively correlated to PD ($R^2=0.7024$, p<0.0001) and to ADG ($R^2=0.5096$, p<0.0001). The estimated lysine requirement based on PD rate also showed large variation (12.37 to 18.38 g/day true ileal digestible lysine on average between 25 and 100 kg), thus strongly indicated the need of separate feeding strategies for each group of pigs. When pigs were divided into three categories according to estimated whole body PD rate, the group of pigs with the highest PD rate grew faster by 6.3 and 13.9% than pigs with intermediate and low PD rate, respectively. Feed utilization was also more efficient in pigs with a high PD rate. It appeared that pigs with high PD rate maintained higher PD rate especially in the later stage of their life. Pigs with high PD rate require an extra amount of 1.2 and 2.4 g/true digestible lysine per day and 0.4 and 0.8% more lysine in the diet than pigs with intermediate and low PD rate during the growing-finishing period respectively. Results of this study suggest that there is a need for separate feeding strategies for individual group of pigs with different PD rate. It should be noted that average value for each group presented in this report is not the adequate amount for an animals potential for maximum PD rate. With recent development in growth modeling and access to computer technologies to facilitate computation, pork producers can easily estimate pigs protein deposition rate and thus can make their own feeding strategies.

• The Journal of Korea Robotics Society
• /
• v.8 no.3
• /
• pp.173-178
• /
• 2013

We present six-degree-of-freedom (6DoF) haptic rendering algorithms using translational ($PD_t$) and generalized penetration depth ($PD_g$). Our rendering algorithm can handle any type of object/object haptic interaction using penalty-based response and makes no assumption about the underlying geometry and topology. Moreover, our rendering algorithm can effectively deal with multiple contacts. Our penetration depth algorithms for $PD_t$ and $PD_g$ are based on a contact-space projection technique combined with iterative, local optimization on the contact-space. We circumvent the local minima problem, imposed by the local optimization, using motion coherence present in the haptic simulation. Our experimental results show that our methods can produce high-fidelity force feedback for general polygonal models consisting of tens of thousands of triangles at near-haptic rates, and are successfully integrated into an off-the-shelf 6DoF haptic device. We also discuss the benefits of using different formulations of penetration depth in the context of 6DoF haptics.

• Preventive Nutrition and Food Science
• /
• v.14 no.2
• /
• pp.95-101
• /
• 2009

In this study, we assessed the effects of Se-methylselenocysteine (MSC) pretreatment on the antioxidant system in the pancreas and the development of alloxan-induced diabetes in rats. The rats were treated with MSC at a dose of 0.75 mg/rat/day for 2 weeks. The MSC-treated rats evidenced significantly increased glutathione content, GSH/GSSG ratio, and glutathione peroxidase (GPx) and glutathione reductase (GRd) activities in the pancreas. Diabetes was induced via alloxan injection. The alloxan-diabetic rats evidenced significantly reduced glutathione content and glucose 6-phosphate dehydrogenase (G6PD) activity and increased catalase activity in the pancreas, when measured 3 days after the alloxan injection. 2-week MSC pretreatment was shown to prevent the alloxan-induced hyperglycemia as well as changes in glutathione content, G6PD activity, and catalase activity. The results of this study indicate that the prevention of alloxan-diabetes by MSC pretreatment is associated with its effects on antioxidants in the pancreas, namely, the increase in cellular content and the reduction of glutathione by the facilitation of glutathione recycling induced via increased GPx, GRd, and G6PD activities.

• Journal of the Korean Magnetics Society
• /
• v.18 no.5
• /
• pp.190-194
• /
• 2008

Epitaxial $L1_0$ FePd (001) thin films were successfully manufactured by sputtering deposition method. The structure and magnetic properties of FePd thin films were characterized as a function of Fe compositions. It was found that the long-range ordering parameter had a maximum for the stoichiometric composition, whereas the magnetic anisotropy had a maximum as the Fe content is decreased to slightly above the stoichiometric composition. This indicates that the stoichiometry is directly contributed to the chemical ordering and the magnetic anisotropy. These results imply that nonstoichiometric FePd compositions, with a slight excess of Pd, may in fact be preferred for applications that require high magnetic anisotropy.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1799-1801
• /
• 2004

We have developed the external-type PD sensors for detecting of the electromagnetic waves up to ultra high frequency (UHF) bands, propagating in various type of GIS. Sufficiently high sensitivity and accuracy for practical use were achieved for the external PD sensor. The experience at the fields and the criteria for the judgment are also discussed in detail.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.125-127
• /
• 2004

We have developed the external-type PD sensors for detecting of the ultra high frequency (UHF) signals in various type of GIS. Sufficiently high sensitivity and accuracy for practical use were achieved for the PD sensor. The experience at the fields and the criteria for the judgment are also discussed in detail.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.413-418
• /
• 2008

The production of 1,3.propanediol (1,3-PD) was investigated with Klebsiella pneumoniae DSM2026 and K. pneumoniae DSM4799 using crude glycerol obtained from biodiesel industry. Crude glycerol was used without prior purification to investigate effects of impurities in crude glycerol on 1,3-PD production. In the batch cultures, 1,3-PD production with crude glycerol was $1.1{\sim}2.5$ times higher than that with pure glycerol, indicating that crude glycerol is even a better substrate than pure glycerol for 1,3-PD fermentation. When glucose was added, 1,3-PD production and yield decreased in spite of enhanced cell growth. Furthermore, the addition of glucose was found to increase 2,3-butanediol, a by-product, significantly because of the change in metabolism in the presence of glucose. In semi-batch cultures without glucose addition, 26 g/L 1,3-PD was produced with crude glycerol, which was $2{\sim}3$ times higher than that with pure glycerol. Based on our results, it was clearly shown that crude glycerol is an effective substrate for biological 1,3-PD production, making it more feasible to produce 1,3-PD at a lower price.