• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.2
• /
• pp.27-31
• /
• 2002

This study was measured weight loss, total ascorbic acid, titratable acidity, soluble solids content and overall appearances to investigate the effect of corrugated fiberboard box coated with functional materials ; R, G, X box, R, G and X box and Con(double wall corrugated fiberboard) box during storage at $25^{\circ}C$. Weight loss of mandarin of control, corrugated paperboard box coated with functional materials(Y-, R-, G-box) after 8 days were 2.56% to 3.67%. There was not different to weight loss among the four kind of packages. Titratable acidity and soluble solids content of packages was not significant. Total ascorbic acid content(TAA) of mandarin packed with R-box and Y-box was 10% higher than that of control after 8 days. Decay ratio of R-box, Y-box, G-box and control was 4%, 10%, 10% and 8%, respectively. Overall appearance of R-box was the best.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.315-318
• /
• 1998

This study was carried out to investigate the effect of seedling growth with different seedling rate for machine transplanting with turf. Chosun Zoysia was sown on May 17 with three levels seedling rates. The plant charactersitics were greater in 500g/box plots than the other seedling rates on the seedling box. It ws shown that the 30-40day old seedlings of 1.000 and 2,000g/box seedling plots appeared to be proper methods for Sprigging as the high seedling density. The 70 day old seedling plant with 500g/box were shown to be propoer methods for Sprigging. The seedling periods need to be 60 days for 500g/box plots and 40 days for 1,000 and 2,000g/box plots as forming the mats.

• BMB Reports
• /
• v.41 no.2
• /
• pp.132-138
• /
• 2008

AtbZIP16 and AtbZIP68 are two putative G group bZIP transcription factors in Arabidopsis thaliana, the other three members of G group bZIPs are GBF1-3 which can bind G-box. Members of G group have conservative protein structure: highly homological basic region and a proline-rich domain in the N-terminal region. Here, we report that AtbZIP16 and AtbZIP68 could bind cis elements with ACGT core, such as G-box, Hex, C-box and As-1, but with different binding affinities which from high to low were G-box > Hex > C-box > As-1; AtbZIP16 and AtbZIP68 could form homodimer and form heterodimer with other members of G group; N-terminal proline rich domain of AtbZIP16 had transactivation activity in yeast cells while that of AtbZIP68 did not; AtbZIP16 and AtbZIP68 GFP fusion protein localized in the nucleus of onion epidermal cells. These results indicated that AtbZIP16 and AtbZIP68 were two new members of GBFs. In Arabidopsis, AtbZIP16 and AtbZIP68 may also participate in light-responsive process in which GBF1-3 are involved.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.746-752
• /
• 2018

In this study, an optimized process for the waste cooking oil based biodiesel production using microwave energy was designed by using Box-Behnken design model. The process variables were chosen as a mole ratio of the methanol to oil, microwave power, and reaction time. Fatty acid methyl ester (FAME) content was then measured. Through the results of basic experiments, the range of optimum operation variables for the Box-Behnken design model, such as the methanol/oil mole ratio and reaction time, were set as between 8 to 10 and between 4 to 6 min, respectively. Ranges of the microwave power were set as from 8 to 12 W/g for 1.30 mg of KOH/g, acid value, while from 10 to 14 W/g for 2.00 mg of KOH/g, acid value. The optimum methanol/oil mole ratio, microwave power, and reaction time were reduced to 7.58, 10.26 W/g, and 5.1 min, respectively, for 1.30 mg KOH/g of acid value. Also, the optimum methanol/oil mole ratio, microwave power, and reaction time were 7.78, 12.18 W/g, and 5.1 min, respectively, for 2.00 mg KOH/g of acid value. Predicted FAME contents were 98.4% and 96.3%, with error rates of less than 0.3%. Therefore, when the optimized process of biodiesel production using microwave energy was applied to the Box-Behnken design model, the low error rate could be obtained.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.47-53
• /
• 1999

The effect of coating of liner components with oxidized starch on the properties of corrugated box was examined . Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) , and corrugated box was made from the treated corrugated board. Box was made in a regular slotted container (RSC) style, and box compression strength was determined in the direction of top-to-bottom compression. The compression strength of box coated on outside liner component showed 15.4% improvement for 1.58g㎡ coating. On the other hand, the strength of box coated on outside liner component showed only 1.45% improvement for 1.41g/㎡ coating and 3.46% improvement for 2.32g/㎡ coating. Coating on inside liner component with oxidized starch at low coating weight more significantly improved box compression strength than coating on outside liner component, and the improvement was marked at the coating weight of 1.5-2.5g/㎡. In estimating top-to-bottom box compression strength, the experimental values were closer to the calculated values from McKee's equation suing edgewise compression strength of the combined board measured by column crush test than those from Kellicutt's equation using compression strength of component paperboards measured by ring crush test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.429-434
• /
• 2017

In a graph G=(V, E) with n vertices, there is an unique box which is finally laid on each vertex. Thus each vertex and box is both numbered from 1 to n and the box i should be laid on the vertex i. But, the box ${\pi}$(i) is initially located on the vertex i according to a permutation ${\pi}$. In each step, the robot can walk along an edge of G and can carry at most one box at a time. Also when arriving at a vertex, the robot can swap the box placed there with the box it is carrying. The problem is to minimize the total step so that every vertex has its own box, that is, the shuffled boxes are sorted. In this paper, we shall find an upper bound of the minimum number of steps and show that the movement of the robot is found in $O(n^2)$ time when G is a cycle.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.3
• /
• pp.935-949
• /
• 2013

In this paper, we study surfaces in $\mathb{E}^3$ whose Gauss map G satisfies the equation ${\Box}G=f(G+C)$ for a smooth function $f$ and a constant vector C, where ${\Box}$ stands for the Cheng-Yau operator. We focus on surfaces with constant Gaussian curvature, constant mean curvature and constant principal curvature with such a property. We obtain some classification and characterization theorems for these kinds of surfaces. Finally, we give a characterization of surfaces whose Gauss map G satisfies the equation ${\Box}G={\lambda}(G+C)$ for a constant ${\lambda}$ and a constant vector C.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.785-786
• /
• 2010

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.199-206
• /
• 2014

Purpose : According to the rapid increase recently in image-guided radiation therapy, It is necessary to control of the image guidance system completely. In particular for the main subject to the accuracy of image guided radiation therapy device to be done essentially the quality assurance. We made efficient phantom in AMC for the management of the accurate and efficient. Materials and Methods : By setting up of five very important as a quality assurance inventory of the Image guidance system, we made (AMC G-Box) phantom for quality assurance efficient and accurate. Quality assurance list were the Iso-center align, the real measurement, the center align of four direction, the accuracy of table movement and the reproducibility of Hounsfield Unit. The rectangular phantom; acrylic with a thickness of 1 cm to $10cm{\time}10cm{\time}10cm$ was inserted the three materials with different densities respectively for measure the CBCT HU. The phantom was to perform a check of consistency centered by creating a marker that indicates the position of the center fixed. By performing the quality assurance using the phantom of existing, comparing the resulting value to the different resulting value using the AMC G-Box, experiment was analyzed time and problems. Therapy equipment was used Varian device. It was measured twice at 1-week intervals. Results : When implemented quality assurance of an image guidance system using AMC G-Box and a phantom existing has been completed, the quality assurance result is similar in $0.2mm{\pm}0.1$. In the case of the conventional method, it was 45 minutes at 30 minutes. When using AMC G-Box, it takes 20 minutes 15 minutes, and declined to 50% of the time. Conclusion : The consistency and accurate of image guidance system tend to decline using device. Therefore, We need to perform thoroughly on the quality assurance related. It needs to be checked daily to consistency check especially. When using the AMC G-Box, It is possible to enhance the accuracy of the patient care and equipment efficiently performing accurate quality assurance.

• Journal for History of Mathematics
• /
• v.23 no.1
• /
• pp.79-88
• /
• 2010

G$\ddot{o}$del's proof attempts to establish the existence of God by the definition that God is a being having all positive properties. The proof uses here second order modal logic system $S_5$ with the axiom ${\diamondsuit}{\Box}p{\rightarrow}{\Box}p$. We review the G$\ddot{o}$del's own version and prove his ontological theorems.