• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.3
• /
• pp.363-369
• /
• 2014

Purpose: Three-dimensional (3D) displays are very useful in many fields, but induce physical discomforts in some people. This study is to assess symptom type and severity of asthenopia with their habitual distance corrective spectacle (HDCS) and their binocular vision corrective spectacle lenses (BVCSL) in people who feel physical discomforts. Methods: 35 adult subjects (ages $32.2{\pm}4.4$ yrs) were pre-screened out of 98 individuals to have the highest symptom/asthenopia scores following 65 minutes of 3D television viewing with HDCS. These 35 individuals were then retested symptom/asthenopia scores during they watched 3D television for 65 minutes at a distance of 2.7 m with wearing BVCSL of horizontal, vertical or base down yoked prisms. A 4-point symptom-rating scale questionnaire (0=no symptom and 3=severe) was used to assess 11 symptoms (e.g., blur, diplopia, etc.) related to visual fatigue/visual discomfort. Distance and near lateral phoria were measured using Howell phoria card and vertical phoria were measured using Maddox rod. Symptoms induced by watching 3D TV were compared between wearing HDCS and BVCSL. Results: Asthenopia in watching 3D TV with wearing BVCS was significantly lower than wearing HDCS at 5, 25, 45, and 65 minutes (all p < 0.001, paired t-tests). In only refractive error power correction power group, all asthenopia was not significantly different between HDCS and BVCSL (all $p{\geq}0.05$, paired t-tests). In prism correction groups for binocular imbalance, symptoms of asthenopia, however, was significantly lower for when wearing BVCSL than when wearing HDCS (all p < 0.05). Conclusions: Correction of phoria/vergence-based binocular vision imbalance can reduce asthenopia during 3D television viewing. An individual with binocular vision imbalance need corrected/compensated glasses with appropriate prisms prior to prolonged viewing of 3D television displays to reduce asthenopia/visual fatigue.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.343-352
• /
• 1998

The relationship between summer hypoxia in bottom water layer and benthic community structure was discussed at forty sampling stations in semi-enclosed Youngsan River estuarine bay, Korea. The oxygen deficient layer less than $2.0 mg/\ell$ was widely developed in the inner estuarine stations in summer due to the summer stratification. A total of 141 species was occurred, with a mean density of $1,923 ind./m^2$ and biomass of $79.44\;g/m^2$ in summer season. The species number was significantly increased with the increment of the bottom dissolved oxygen, whereas density and biomass were partially correlated within the low oxygen level of $2.0\;mg/\ell$. These results imply that benthic community structures are affected by bottom oxygen depletion in summer. Cluster analysis showed that the benthic community could be classified into three station groups. These station groups from the species composition coincided with the groups based on the environmental factors. This fact suggests that the overall spatial distribution of macrozoobenthos in Youngsan River estuarine bay in summer should be controlled by the summer hypoxia and clay content of the area. Group-I was located the innermost estunrine bay from Mokpo Harbour to near the dike, where summer hypoxia was developed and one bivalve Theora fragilis, two polychaetes, Tharyx sp. and Lumbrineris longifolia were dominated. Group-II, the central transitory area of the estuarine bay between two another stational groups, where two bivalves Theora fragilis, Raetellops pulchella and a polychaete Tharyx sp. predominated with relatively low density compared to that of Group-I. Group-III, the mouth part of the estunrine bay exposed to the open sea, where a polychaetes Poecilochaetus johnsoni and a bivalve Yoldia Johanni predominated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.589-597
• /
• 2008

The purpose of this study is to arrange for the systematic execution of safety control in children's foods through nutrition and hygiene standard suggestions and guidelines for quality certification system in children's preferable food. Aiming to achieve this objective, the study researched the present status of children’s preferable food sold near elementary schools, elicited the hazards and problems of those foods and selected nutritional and hygienic hazard components in those foods. To suggest the standards and guidelines for quality certification in children's preferable food, the study referred to sundry records, surveyed the practical cases of relevant policies and standards at home and abroad. We studied the standard of nutrition for the quality certification in those foods for sugar, fat, sodium, and additives (tar color: red No. 2 in a ban on use, caffeine), microorganism (aflatoxin $B_1$ (${\mu}g$/kg) and pathogenic bacteria (Staphylococcus aureus, Bacillus cereus, Salmonella spp.), which are the nutrients that may hamper health when taken in a large amount, and the standard for a diet restricted to under 200 kcal per one serving size. Results of distribution of processed foods (242 samples) by nutrition standards were as follows. In case of all ‘low’ level in total sugar, total fat and sodium, 0.4% of total samples was possible to be certified, In case of all ‘medium’ level in total sugar, total fat and sodium, maximumly 22.3% of total samples was possible to be certified. In case of all medium level in nutrients and $\leq$200 kcal/serving, 17.8% of total samples was possible to be certified. Certified food types was milk products and beverages.

• The Korean Journal of Malacology
• /
• v.25 no.2
• /
• pp.153-160
• /
• 2009

Pisidium (Neopisidium) coreanum is a freshwater snail and lives in spring water near mountain areas. Interestingly, this snail has been traditionally regarded as medicinal food, and thus has been used as folk remedies for healing broken bones. Recently, alpha classification on Pisidium (Neopisidium) coreanum through redescription has been conducted. However, not much attention has been made in beta classification. In this study, we performed the beta classification based on metallothionein (MT) genes found from various organisms. To this end, the complete cDNA sequences were obtained from the Expressed Sequence Tag (EST) sequencing project of Pisidium (Neopisidium) coreanum. The coding region (315 bp) encoded an amino acid sequence of 105 residues. The combined results from BLAST analyses, multiple sequence alignment and molecular phylogenetic study of Pc-MT gene indicate that Pisidium (Neopisidium) coreanum has similarity to freshwater bivalve such as Dreissena polymorpha (zebra mussel), Unio tumidus (swollen river mussel) and Crassostrea ariakensis (suminoe oyster).

• The Korean Journal of Malacology
• /
• v.24 no.3
• /
• pp.229-241
• /
• 2008

Changes of growth and histopathological feature in the mantle structure of the equilateral venus, Gomphina veneriformis exposed to tribultyltin chloride (TBTCl) for 36 weeks were observed. Concentrations of TBTCl were 0, 0.4, 0.6, and $0.8{\mu}g/L$. A regression analysis by power function of SPSS was shown that the growth of experimental groups was significantly decreased after 12 weeks of exposure. For histological analysis, mantle tissues were characterized using H-E stain, AB-PAS (pH 2.5) reaction and Masson's trichrome stain, and epidermal layer thickness and mucous cell distribution were analysed using the image analyser. The mantle had 4-folds (inner-inner, inner-outer, middle, and outer) and its epidermal layer consisted of simple epithlia. A periostracum was observed in the periostracal groove between middle and outer fold. Inner epidermal layer consisted of simple ciliated columnar epithelia, but the outer epidermal layer consisted of simple non-ciliated columnar epithelia. Alcian blue positive mucous cells showed blue color (7462c, 653c) in the inner fold, violet color (2583c) in the middle fold, and blue color (647c, 7455c) in inner epidermal layer (numbers in the parenthesis are codes of Pantone process coated color). Hemolymph sinus in the mantle was extended, and mucous cells in inner plica of the middle fold were stained as blue (7455c) and violet (2587c), after 12 weeks of TBTCI exposure. Cilia and striated border were disappeared, and number of mucous cells in the inner epidermal layer was reduced. Serious histopathological changes in middle and outer fold near the periostracum were observed after 36 weeks. Moreover, epidermal layer thickness and mucous cell distribution were showed decreasing tendency as exposure time to TBTCI was increased. Results of this study suggested that TBTCl induced growth disorder with histopathological changes.

• Journal of the Korean Geophysical Society
• /
• v.7 no.3
• /
• pp.193-206
• /
• 2004

Geophysical data including chirp (3 7 kHz) subbottom profile and detailed bathymetry were obtained over three seamounts in the Ogasawara Fracture Zone (OFZ) of the western Pacific, as a part of manganese crust survey onboard R/V Onnuri in 2003. The OFZ is a 150-km-wide, 600-km-long rift zone, which separates the East Mariana and Pigafetta Basin. The OFZ is unique in that it includes many seamounts (e.g., Magellan Seamounts andseamounts on the Dutton Ridge). The sub-seafloor acoustic echoes obtained near the OFZ were classified into following types on the basis of their characteristics: types I-1(pelagic sediment with parallel or subparallel reflectors), I-2 (pelagic sediment with no internal reflectors), and III-1 (reef build-up complex) on summit; types II-1 and III-2 (basement outcrop) on flank rift zone and upper slope, respectively; type III-3 (slump) on the lower slope and embayment between the flank rift zones; types II-2 (debrite) on the base of slope and basin floor; and types II-3 (turbidite or pelagic sediment) and II-4 (turbidite) on the basin floor. The mass-wasting that produced the complex of type II-2 debrite and III-3 slump on the lower slope and basin may have been caused by (1) strong tensional stress in the OFZ which may cause the numerous fissures or basement faults and (2) complex of the faults on the summit and steep upper slope. The variations in the echo type of pelagic sediment in the summit of seamounts may be related with the changes in the depositional and/or erosional environments. Type I-2 pelagic sediment, which is characterized by a thin and intermittent coverage, was probably deposited at a sheltered area when the current was strong, whereas type I-1 pelagic deposit occurred during a stage of progressive sedimentation.

• Journal of Plant Biology
• /
• v.38 no.3
• /
• pp.305-317
• /
• 1995

The bryophyte communities on the forest floor of the mixed coniferous, deciduous broad-leaf forest and the evergreen coniferous forest of cool temperate and subalpine zones in Chiri Mountains with the highest peak (Cheonwangbong 1915 m) in south-central part of the Korean Peninsula were investigated from the phytosociology viewpoint. As a result, five bryophyte communities were recognized, considering the species composition of vascular vegetation; A. Sasamorpha borealis-Abies koreana/Dicranum scoparium-Plagiothecium silvaticum community, B. Bosta minor-Abies koreana/Anomodon rugelii-Plagiomnium cuspidatum community, C. Abies koreana/Hylocomiopsis ovicarpa-Entodon rubicundus community, D. Abies koreana-Picea jezoensis/Hylocomiopsis ovicarpa-Thuidium kanedae community, E. Abies koreana-Pieea jezoensis/Hylocomium splendens-Pleurozium sehreberi community. Among these, the communities A, B, C and D were distributed in the mixed coniferous and deciduous broad-leaf forest of lower altitudes (1200 to 1700 m) and characterized by the elements of the cool temperate zone. They were confimled as synusies belonging to the Fraxino-Abietetum koreanae Song 1988. The community E was distributed in higher altitudes (1700 m to near the summit) and characterized by the species group of the holarctic elements, e.g. Hyloeomium splendens, Pleurozium sehreberi, Dieranum majus, etc. limited in subarctic; subalpine and arctic; alpine zones. The community E was confirmed as a synusie of the Abieti koreanae-Piceetum jezoensis Song 1991 belonging the Vaecinio-Pieeetea Br.-BI. 1939. Up to date many investigator have described the coniferous forest distibuted above 1200 m in Chiri mountauns as the forest vegetation of subalpine zone. However, from the results of the present study, the boundary of the mixed forest and the true subalpine coniferous forest was elucidated to be ca. 1700 m phytosociologically. Species richness was highest in the community E, and the other four communities showed a similar species richness. Among the species diversity indices, H' and D were high in the communities Band E, low in the communities A and C, and medium in the community D. The values of J' decreased with the increase in altitudes and the community E showed the lowest value. The result of Bray-Curtis ordination revealed that the diversity analysis and the division of the above two forest zones are justifiable. The taxa of the bryophyte communities were composed of 25 families, 46 genera, 73 species, 1 subspecies and 2 varieties.

• Progress in Medical Physics
• /
• v.10 no.3
• /
• pp.133-140
• /
• 1999

In this paper, as a preliminary study for developing a full 3D electron dose calculation algorithm, We developed 2.5D electron dose calculation algorithm by extending 2D pencil-beam model to consider three dimensional geometry such as air-gap and obliquity appropriately. The dose calculation algorithm was implemented using the IDL5.2(Research Systems Inc., USA), For calculation of the Hogstrom's pencil-beam algorithm, the measured data of the central-axis depth-dose for 12 MeV(Siemens M6740) and the linear stopping power and the linear scattering power of water and air from ICRU report 35 was used. To evaluate the accuracy of the implemented program, we compared the calculated dose distribution with the film measurements in the three situations; the normal incident beam, the 45$^{\circ}$ oblique incident beam, and the beam incident on the pit-shaped phantom. As results, about 120 seconds had been required on the PC (Pentium III 450MHz) to calculate dose distribution of a single beam. It needs some optimizing methods to speed up the dose calculation. For the accuracy of dose calculation, in the case of the normal incident beam of the regular and irregular shaped field, at the rapid dose gradient region of penumbra, the errors were within $\pm$3 mm and the dose profiles were agreed within 5%. However, the discrepancy between the calculation and the measurement were about 10% for the oblique incident beam and the beam incident on the pit-shaped phantom. In conclusions, we expended 2D pencil-beam algorithm to take into account the three dimensional geometry of the patient. And also, as well as the dose calculation of irregular field, the irregular shaped body contour and the air-gap could be considered appropriately in the implemented program. In the near future, the more accurate algorithm will be implemented considering inhomogeneity correction using CT, and at that time, the program can be used as a tool for educational and research purpose. This study was supported by a grant (＃HMP-98-G-1-016) of the HAN(Highly Advanced National) Project, Ministry of Health & Welfare, R.O.K.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2008

The world demand of ethanol as an alternative fuel for gasoline is increasing rapidly because of high oil price and global climate change. Most of ethanol is currently produced from corn grain or sugars in sugarcane and sugar beet. Because these sources compete with foods and animal feed and are not expected to be enough for future demand of ethanol. Thus, cellulosic ethanol from agricultural residues or wood has to be commercialized in near future. Typical cellulosic ethanol production consists of pretreatment, enzyme hydrolysis, fermentation and product separation. This paper reviews the principles and status of each step and discusses issues for cellulosic ethanol production.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.