• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.592-600
• /
• 2010

The problem of motion control for AUV (Autonomous Underwater Vehicles) is addressed. The utilization of such robotic vehicles has gained an increasing importance in many marine activities. In this paper the objective is to describe how to design and apply FGS (Fuzzy Gain Scheduling) PD (Proportional Derivative) controller for an AUV (Autonomous Underwater Vehicle) to control the yaw and depth of the vehicle by keeping the path of the navigation to a desired point, and/or changing the path according to a set point.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권5호
• /
• pp.205-211
• /
• 2000

This paper presents an optimal design method for fuzzy logic controller (FLC) of HVDC using an Adaptive Evolutionary Algorithm(AEA). We have proposed the AEA which uses a genetic algorithm (GA) and an evolution strategy (ES) in an adaptive manner in order to take merits of two different evolutionary algorithms. The AEA is used for tuning fuzzy membership functions and scaling constants. Simulation results show that disturbances are well damped and the dynamic performances of FLC have better responses than those of PD controller when AC system load changes suddenly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.441-446
• /
• 1992

We propose a control architecture for the fuzzy logic control of robot manipulators and a rule base derivation method for a fuzzy logic controller(FLC) using a neural network. The control architecture is composed of FLC and PD(positional Derivative) controller. And a neural network is designed in consideration of the FLC's structure. After the training is finished by BP(Back Propagation) and FEL(Feedback Error Learning) method, the rule base is derived from the neural network and is reduced through two stages - smoothing, logical reduction. Also, we show the performance of the control architecture through the simulation to verify the effectiveness of our proposed method.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.630-642
• /
• 2007

In this paper, we propose a direct model reference adaptive fuzzy control (MRAFC) for MIMO nonlinear systems whose structure is represented by the Takagi-Sugeno fuzzy model. The adaptive law of the MRAFC estimates the approximation error of the fuzzy logic system so that it provides asymptotic tracking of the reference signal for the systems with uncertain or slowly time-varying parameters. The developed control law and adaptive law guarantee the boundedness of all signals in the closed-loop system. In addition, the plant state tracks the state of the reference model asymptotically with time for any bounded reference input signal. To verify the validity and effectiveness of the MRAFC scheme, the suggested analysis and design techniques are applied to the tracking control of robot manipulator and simulation studies are carried out. In the control design, the MRAFC is combined with feedforward PD control to make the actual joint trajectories of the robot manipulator with system uncertainties track the desired reference joint position trajectories asymptotically stably.

• 제어로봇시스템학회논문지
• /
• 제15권5호
• /
• pp.525-529
• /
• 2009

Most of FLC received input data from error e and change-of-error e' with no relation with system complexity. Basic scheme follows typical PD and PI or PID Controller and that has been developed through fixed ME In this paper, We studied the relationship between MF and system response and system response through changing Fuzzy variable of consequence MF and propose the simple FLC using this relationship. The response of FLC is changed according to the width of Fuzzy variable of consequence MF. As changing the Fuzzy variable of consequence MF shows various nonlinear characteristic, we studied the relation between response and MF using analytical method. We designed the effective FLC using three-variable MF and nine rules and took simulation for verification. In this study, we propose the method to design system with FLC in stability point which is an impotent characteristic of designing system. The circle criterion which is adapted to analysis the nonlinear system is put to use for proposed method. Since SISO FLC has a time-invariant and odd characteristic we can use the critical point not disk which is generally used to determine the stability in the circle criterion, to determine the stability. Using this, we can get the maximum critical point plot of SISO FLC with changing the consequence fuzzy variables. The predetermined critical point plot of FLC can be used to decide the region of the system to be stable. This method is effectively used to design the SISO FLC.

• 한국지능시스템학회논문지
• /
• 제7권2호
• /
• pp.70-78
• /
• 1997

여러 가지 고급 제어 이론들에 관한 연구가 심도있게 진행되고 있음에도 불구하고 아직까지 산업현장에는 여러가지 변형된 형태의 PID 제어기가 널리 사용되고있다. 이는 PID 제어기 자체가 가진 제어 구조의 단순성, 효율성, 강건성, 그리고 제어 기술자들에 대한 친밀감 등에 기인한다. 또한 요즘 제어 분야에서는 퍼지 이론을 도입하는 연구가 활발히 진행되고 있다. 특히, 퍼지 이론을 사용해서 거의 모든 함수들을 근사화시킬 수 있다는 연구 결과들이 발표되면서 수학적으로 안정성 및 강건성을 명확히 증명하기에 다소 미흡하였던 퍼지 논리 제어에 관한 연구가 활기를 띠고 있다. 본 논문에서는 먼저 간단한 퍼지 제어기로부터 선형 PID 제어기를 유도한다. 그리고 나서 다소 일반적인 경우의 퍼지 제어기를 사용하여 산업 현장에서 가장 널리 사용되고있는 선형PID 제어기를 유도하여 결굴 PID 제어기는 퍼지 제어기의 일종에 불과함을 입증할 것이다.

• 대한건축학회논문집:계획계
• /
• 제36권3호
• /
• pp.13-20
• /
• 2020

The purpose of this study is to analyze the fuzzy pattern that is reflected on the inside of the value evaluator in measuring the economic value of architectural aesthetic using the fuzzy-contingent valuation method. The main results of analyzing the relationship between architectural aesthetic and fuzzy patterns by typing 307 fuzzy patterns collected from visitors at Dongdaemun Design Plaza are as follows: First, low levels of architectural aesthetic can be a primary cause of extreme refusal of payment. However, it was confirmed that the extreme refusal of payment could partially involve mentality of free-ride on public goods or mentality that would not give value to past events that are not future. Second, if the architectural aesthetic score is 77.5, the most perfect form of fuzzy pattern is formed. It is confirmed that the fuzzy form, which is the standard in the relationship between architectural aesthetic and money value, is made at 77.5 points. This means that it is most efficient to have 77.5 points of architectural aesthetic to secure balanced data by membership in the study of architectural aesthetic value measurement through fuzzy pattern. Third, according to the architectural aesthetic score, respondents can be interpreted as follows: no monetary willingness arises before or after 52.4, starts to respond to the amount before and after 65.6, severe conflict over payments around 70.6~71.7, stronger willingness to pay around 77.6, want to pay for sure around 80.0.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.265-271
• /
• 1992

It is the purpose of this paper to present a dialogical designing method for control system using a rough grasp of the unknown process property. We deal with a single-input single-output feedback control system with a fuzzy controller. The process property is roughly estimated by the step response, and the fuzzy controller is interactively modified according to the operator's requests. The modifying rules mainly derived from computer simulation are useful for almost every process, such as an unstable process and a non-minimum phase process. The fuzzy controller is tuned by taking notice of four characteristics of the step response: (1) rising time, (2) overshoot, (3) amplitude and (4) period of vibration. The tuning position of the controller is fourfold: (1) antecedent gain factor GE or GCE, (2) consequent gain factor GDU, (3) arrangement of the antecedent fuzzy labels and (4) arrangement of the control rules. The rules give an instance to the respective items of the controller in an effective order. The modified fuzzy PI controller realizes a good response of a stable process. However, because the GDU tuning becomes difficult for the unstable process, it is necessary to evaluate the stability of the process from the initial step response. The fuzzy PI controller is applied to the process whose initial step response converges with GDU tuning. The fuzzy PI controller with modified sampling time is applied to the process whose step response converges under the repeated application of the GDU tuning. The fuzzy PD controller is applied to the process whose step response never converges by the GDU tuning.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.109-114
• /
• 2002

Various inverted pendulum systems have been frequently used as a model for the performance test of the proposed control system. We first identify a rotary-type inverted pendulum system by the Euler-Lagrange method and then design a FLC (Fuzzy Logic Controller) fur the plant. FLC`s are one of useful control schemes fur plants having difficulties in deriving mathematical models or having performance limitations with conventional linear control schemes. Many FLC`s imitate the concept of conventional PD (Proportional-Derivative) or PI (Proportional-Integral) controller. That is, the error e and the change-of-error are used as antecedent variables and the control input u the change of control input Au is used as its consequent variable for FLC`s. In this paper we design a simple-structured FLC for the rotary inverted pendulum system. We also perform some computer simulations to examine the tracking performance of the closed-loop system.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.57-64
• /
• 2007

One of the cause of insulation failure in power cable is well known by electrical treeing discharge. This is occurred for imposed continuous stress at cable. And this event is related to safety, reliability and maintenance. In this paper, throughout analysis of partial discharge(PD) distribution when occurring the electrical tree, is studied for the purpose of knowing of electrical treeing discharge characteristics according to defects. Own characteristic of tree will be differently processed in each defect and this reason is the first purpose of this paper. To acquire PD data, three defective tree models were made. And their own data is shown by the phase-resolved partial discharge method (PRPD). As a result of PRPD, tree discharge sources have their own characteristics. And if other defects (void, metal particle) exist internal power cable then their characteristics are shown very different. This result Is related to the time of breakdown and this is importance of cable diagnosis. And classification method of PD sources was studied in this paper. It needs select the most useful method to apply PD data classification one of the proposed method. To meet the requirement, we select methods of different type. That is, neural network(NN-BP), adaptive neuro-fuzzy inference system and PCA-LDA were applied to result. As a result of, ANFIS shows the highest rate which value is 98 %. Generally, PCA-LDA and ANFIS are better than BP. Finally, we performed classification of tree progress using ANFIS and that result is 92 %.