DOI QR코드

DOI QR Code

Analysis of PD Distribution Characteristics and Comparison of Classification Methods according to Electrical Tree Source in Power Cable

전력용 케이블 시편에서 전기트리 발생원에 따른 부분방전 분포 특성 및 발생원 분류기법 비교

  • 박성희 (충북대학교 전기전자컴퓨터공학부 전기공학과) ;
  • 정해은 (충북대학교 전기전자컴퓨터공학부 전기공학과) ;
  • 임기조 (충북대학교 전기전자컴퓨터공학부 전기공학과) ;
  • 강성화 (충청대학 소방안전과)
  • Published : 2007.01.01

Abstract

One of the cause of insulation failure in power cable is well known by electrical treeing discharge. This is occurred for imposed continuous stress at cable. And this event is related to safety, reliability and maintenance. In this paper, throughout analysis of partial discharge(PD) distribution when occurring the electrical tree, is studied for the purpose of knowing of electrical treeing discharge characteristics according to defects. Own characteristic of tree will be differently processed in each defect and this reason is the first purpose of this paper. To acquire PD data, three defective tree models were made. And their own data is shown by the phase-resolved partial discharge method (PRPD). As a result of PRPD, tree discharge sources have their own characteristics. And if other defects (void, metal particle) exist internal power cable then their characteristics are shown very different. This result Is related to the time of breakdown and this is importance of cable diagnosis. And classification method of PD sources was studied in this paper. It needs select the most useful method to apply PD data classification one of the proposed method. To meet the requirement, we select methods of different type. That is, neural network(NN-BP), adaptive neuro-fuzzy inference system and PCA-LDA were applied to result. As a result of, ANFIS shows the highest rate which value is 98 %. Generally, PCA-LDA and ANFIS are better than BP. Finally, we performed classification of tree progress using ANFIS and that result is 92 %.

Keywords

References

  1. F. H. Kreuger, 'Partial discharge detection in high Voltage equipment', U.K. Butterworth, p. 14, 1989
  2. L. A Dissado, 'Understanding electrical trees in solids; from experimental to theory', IEEE Transaction on EI, Vol. 9, No.4, p. 483, 2002
  3. F. H. Kreuger, E. Gulski, and A. Krivda, 'Classification of partial discharge', IEEE Transaction on EI, Vol. 28, p. 917, 1993
  4. 이복희, '고전압 대전류 공학', 청문사, p. 53, 2006
  5. E. Kuffel and W. S. Zaengl, 'High Vol.tage engineering', Pergamon press, p. 297, 1984
  6. 한국전기연구원, '전력기기 절연진단 기술', p. 10, 2001
  7. J,-S. R. Jang, C.-T. Sun, and F. Mitutany, 'Neuro-fuzzy and soft computering', Prentice-Hall International, Inc, p. 233, 335, 1997
  8. S. H. Park, K. J. Lim, and S. H. Kang, 'Comparison of classification rate for PD sources using different classification schemes', Journal of Electrical Engineering & Technology, Vol. 1, No.2, p. 257, 2006 https://doi.org/10.5370/JEET.2006.1.2.257
  9. 박성희, 이강원, 강성화, 임기조, 'XLPE 전력용 케이블 시편의 부분방전원 분류', 전기전자재료학회논문지, 17권, 8호, p. 898, 2004
  10. 박우현, 이기식, '에폭시/고무 거시계면에서 장시간 절연파괴전압에 대한 연구', 전기전자재료학회논문지, 15권, 11호, p. 1003, 2002
  11. 일본전기학회, '전기설비의 진단기술', 대한전기학회, p. 7, 255, 1994