• 제어로봇시스템학회논문지
• /
• 제11권2호
• /
• pp.160-166
• /
• 2005

In this paper, to overcome drawbacks of FLC a self tuning fuzzy sliding mode controller is proposed, which controls the position of excavator's attachment, which can be regarded as an ill-defined system. It is reported that fuzzy logic theory is especially useful in the control of ill-defined system. It is important in the design of a FLC to derive control rules in which the system's dynamic characteristics are taken into account. Control rules are usually established using trial and error methods. However, in the case where the dynamic characteristics vary with operating conditions, as in the operation of excavator attachment, it is difficult to find out control rules in which all the working condition parameters are considered. Experiments are carried out on a test bed which is built around a commercial Hyundai HX-60W hydraulic excavator. The experimental results show that both alleviation of chattering and performance are achieved. Fuzzy rules are easily obtained by using the proposed method and good performance in the following the desired trajectory is achieved. In summary, the proposed controller is very effective control method for the position control of the excavator's attachment.

• 한국지능시스템학회논문지
• /
• 제7권5호
• /
• pp.46-50
• /
• 1997

퍼지논리 제어에서 정적인 퍼지규칙은 플랜트나 환경 파라메터의 중대한 변화에 대처할 수 없다. 이러한 문제를 해결하기 위하여 지금까지 스스로 조직화하는 퍼지제어 및 신경망에 기초한 뉴로퍼지등의 기법이 도입되었다.그러나 이러한 기존 방법들은 동적으로 변화된 퍼지 규칙이 완전하지 않거나 모순될 수 있음으로 해서 퍼지 제어기를 위험한 상황에 처하게 할수도 있다. 본 논문에서는 예측 신경망을 사용하여 새로운 적응퍼지 제어기법을 제안한다.제안된 퍼지제어기는 비록 제어 플랜트나 환경 파라메터가 변화할지라도 초기의 완전하고 모순되지 않은 퍼지 규칙과 계속해서 학습하는 예측 신경망의 예측에러를 이용하여 제어출력을 안전하게 적응적으로 변화시켜간다. 직류 서보모터의 위치제어문제를 이용하여 실험해본 결과 제안한 방법이 적응면에서 매우 유용함을 보였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.360-364
• /
• 2001

In this paper, a novel method of reaching law variable structure control based on fuzzy rules is present, which is that the reaching law parameters is on-line adjusted by fuzzy rules. This method is used in a digital ac position servo system, the experiment results show that the system designed by this method has both satisfactory quality and very smaller chattering.

• 한국방재학회 논문집
• /
• 제4권1호
• /
• pp.33-40
• /
• 2004

본 연구에서는 치수방재 효과를 향상시키기 위한 단일댐운영 모형을 개발하였으며, 제어기법은 퍼지제어 기법을 사용하였다. 본 모형은 저수지 수위와 유입량을 기준으로 제어규칙을 설정하였으며 방류량을 결정하는 제어기준에 따라 Fuzzy I, II, III의 세가지 모형을 개발하였다. Fuzzy I 모형은 6개의 제어규칙에 의해 홍수조절만을 고려한 것이고, Fuzzy II 모형은 I 모형의 치수효과를 가지면서도 홍수후의 저수위를 상승시켜 이수적인 효과도 얻기 위한 모형이며, Fuzzy III 모형은 적응제어모형으로 제어규칙을 9개로 세분화하여 치수효과와 이수효과를 동시에 거둘 수 있도록 한 모형이다.

• 한국정보통신학회논문지
• /
• 제10권1호
• /
• pp.212-219
• /
• 2006

퍼지 논리 제어기(FLC : Fuzzy Logic Controller)를 사용할 때, 가장 중요한 것은 소속 함수의 범위를 정하는 것과 규칙의 형태를 결정하는 것이다. 소속 함수의 범위나 규칙의 형태는 자금까지 전문가가 임의로 정하는 방법을 사용하였다. 그러나 기존의 방법을 사용하면, 전문가의 주관적인 규칙과 소속 함수가 생성될 수 있고, 소속함수의 경우 최적의 범위를 정확히 예측하기 어려운 단점이 있다. 본 논문에서는 이런 단점을 보완하기 위해, 유전자 알고리즘을 사용함으로써 최적의 소속 함수와 규칙의 형태를 구하려 하였다. 제시하는 방법의 타당성을 검증하기 위해 자동차 주행 제어 문제에 적용시켜 보았다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권1호
• /
• pp.58-65
• /
• 2001

This paper proposes a self tuning fuzzy inference method by the genetic algorithm in the fuzzy-sliding mode control for a robot. Using this method, the number of inference rules and the shape of membership functions are optimized without an expert in robotics. The fuzzy outputs of the consequent part are updated by the gradient descent method. And, it is guaranteed that he selected solution become the global optimal solution by optimizing the Akaikes information criterion expressing the quality of the inference rules. The trajectory tracking simulation and experiment of the polishing robot show that the optimal fuzzy inference rules are automatically selected by the genetic algorithm and the proposed fuzzy-sliding mode controller provides reliable tracking performance during the polishing process.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.258-263
• /
• 1998

Fuzzy rules are often obtained by experts who know an objective system well. fuzzy rules acquired by experts, however, do not express all input-output relations of the system. This paper proposes a method fuzzy rules are expressed in plain language so that the fuzzy rules are understood easily. The proposed method is applied to the control of the distance between cars and running through a crank-typed road, and the validity of the method is confirmed.

• Journal of Mechanical Science and Technology
• /
• 제15권5호
• /
• pp.580-591
• /
• 2001

This paper proposes a fuzzy-sliding mode control which is designed by a self tuning fuzzy inference method based on a genetic algorithm. Using the method, the number of inference rules and the shape of the membership functions of the proposed fuzzy-sliding mode control are optimized without the aid of an expert in robotics. The fuzzy outputs of the consequent part are updated by the gradient descent method. It is further guaranteed that the selected solution becomes the global optimal solution by optimizing Akaikes information criterion expressing the quality of the inference rules. In order to evaluate the learning performance of the proposed fuzzy-sliding mode control based on a genetic algorithm, a trajectory tracking simulation of the polishing robot is carried out. Simulation results show that the optimal fuzzy inference rules are automatically selected by the genetic algorithm and the trajectory control result is similar to the result of the fuzzy-sliding mode control which is selected through trial error by an expert. Therefore, a designer who does not have expert knowledge of robot systems can design the fuzzy-sliding mode controller using the proposed self tuning fuzzy inference method based on the genetic algorithm.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.81-86
• /
• 1997

It is proposed, for fuzzy combustion control system of refuse incinerator to find the relationship between inputs and outputs and to generate rules to control by using rough set theory. It is not easy to find out the corresponding inputs for each output and the control rules with incomplete or imprecise information consisting expert knowledge, process and manipulator values in the field, and operation manual for the given system. Most decision problems can be formulated employing decision table formalism. A decision table on fuzzy combustion control system for refuse incinerator is simplified and produces control(rules). The I/O realtions and the control rules found by rough set theory are compared with the previous result.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.253-257
• /
• 2000

the objective of this study is to design and evaluate a methodology for diagnosing the appendicitis in a fuzzy neural network that integrates the partition of input space by fuzzy entropy and the generation of fuzzy control rules and learning algorithm. In particular the diagnosis of appendicitis depends on the rule of thumb of the experts such that it associates with the region, the characteristics, the degree of the ache and the potential symptoms. In this scheme the basic idea is to realize the fuzzy rle base and the process of reasoning by neural network and to make the corresponding parameters of the fuzzy control rules be adapted by back propagation learning rule. To eliminate the number of the parameters of the rules, the output of the consequences of the control rules is expressed by the network's connection weights. As a result we obtain a method for reducing the system's complexities. Through computer simulations the effectiveness of the proposed strategy is verified for the diagnosis of appendicitis.