• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.10-16
• /
• 2005

본 논문에서는 퍼지 이득 조정기를 이용한 황전등 전원장치를 제안하고, 회로를 설계하고 제작을 통해 성능을 확인하였다. 직렬 공진 하프 브리지 인버터를 기본으로 하여 전원변동 및 출력 보상을 위한 PFM(Pulse Frequency Modulation), 영전압 스위칭, 소프트 스위칭, 소프트 스타트를 적용하고 퍼지 이득 조정 알고리즘을 통해 역률과 효율을 개선하여 마그네트론의 수명 연장 및 안정된 출력을 얻을 수 있도록 하였고, 기존의 고정 출력에서 $900\~1250[W]$ 연속 가변 출력이 가능하게 하였다. 제작된 전원장치는 전원 전압의 변동에 대하여 상용 전원 $220V{\pm}15[\%]$에서 안정적인 출력 특성과 광효율 97[1m/W], 역률 $96[\%]$로서 만족한 결과를 얻을 수 있었다.

• International Journal of Knowledge Content Development & Technology
• /
• 제7권1호
• /
• pp.57-78
• /
• 2017

There are several statistical classification algorithms available for land use/land cover classification. However, each has a certain bias or compromise. Some methods like the parallel piped approach in supervised classification, cannot classify continuous regions within a feature. On the other hand, while unsupervised classification method takes maximum advantage of spectral variability in an image, the maximally separable clusters in spectral space may not do much for our perception of important classes in a given study area. In this research, the output of an ANN algorithm was compared with the Possibilistic c-Means an improvement of the fuzzy c-Means on both moderate resolutions Landsat8 and a high resolution Formosat 2 images. The Formosat 2 image comes with an 8m spectral resolution on the multispectral data. This multispectral image data was resampled to 10m in order to maintain a uniform ratio of 1:3 against Landsat 8 image. Six classes were chosen for analysis including: Dense forest, eucalyptus, water, grassland, wheat and riverine sand. Using a standard false color composite (FCC), the six features reflected differently in the infrared region with wheat producing the brightest pixel values. Signature collection per class was therefore easily obtained for all classifications. The output of both ANN and FCM, were analyzed separately for accuracy and an error matrix generated to assess the quality and accuracy of the classification algorithms. When you compare the results of the two methods on a per-class-basis, ANN had a crisper output compared to PCM which yielded clusters with pixels especially on the moderate resolution Landsat 8 imagery.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1886-1900
• /
• 2018

This paper proposes a confronting feedback control structure and controllers for positive output elementary super lift Luo converters (POESLLCs) working in discontinuous conduction mode (DCM). The POESLLC offers the merits like high voltage transfer gain, good efficiency, and minimized coil current and capacitor voltage ripples. The POESLLC working in DCM holds the value of not having right half pole zero (RHPZ) in their control to output transfer function unlike continuous conduction mode (CCM). Also the DCM bestows superlative dynamic response, eliminates the reverse recovery troubles of diode and retains the stability. The proposed control structure involves two controllers respectively to control the voltage (outer) loop and the current (inner) loop to confront the time-varying ON/OFF characteristics of variable structured systems (VSSs) like POESLLC. This study involves two different combination of feedback controllers viz. the proportional integral controller (PIC) plus sliding mode controller (SMC) and the fuzzy logic controller (FLC) plus SMC. The state space averaging modeling of POESLLC in DCM is reviewed first, then design of PIC, FLC and SMC are detailed. The performance of developed controller combinations is studied at different working states of the POESLLC system by MATLAB-Simulink implementation. Further the experimental corroboration is done through implementation of the developed controllers in PIC 16F877A processor. The prototype uses IRF250 MOSFET, IR2110 driver and UF5408 diodes. The results reassured the proficiency of designed FLC plus SMC combination over its counterpart PIC plus SMC.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.821-828
• /
• 2011

본 논문은 자동항로 추적(Track keeping control), 자동조타(Automatic steering), 자동 접이안(Automatic mooring control) 등으로 구성된 자동운항 시스템 중 자동조타장치의 성능 개선 알고리즘 개발에 대해 다루고 있다. 자동조타는 풍력 또는 조력 등의 영향으로부터 선박의 설정 항로와 실제 침로와의 차이를 계산하여 설정된 항로를 유지하며 항해하므로, 조타에 소요되는 선원의 지속적인 항해로 인한 운전 부담을 경감시키고 불필요한 타조작에 의한 항로 이탈을 줄임으로써 항해거리 단축과 연료비용을 절약할 수 있는 시스템이다. 선박의 모델링을 위하여 Nomoto 모델에 근거하여 전달함수를 구하고, 조종성능(Manoeuvirng) 편리성을 고려하여 타각 입력에 대한 선수각 응답으로 표시된 선박의 4자유도만을 고려한 선형 모델을 제안하고 선박 자동조타장치의 최대각과 타각율을 고려하여 Fuzzy제어기를 설계 하였고 PID제어기로 성능을 비교 분석하였다.

• 한국지능시스템학회논문지
• /
• 제8권2호
• /
• pp.50-59
• /
• 1998

This paper presents stabilization and adaptive control of flexible single link robot manipulator system by self-recurrent neural networks that is one of the neural networks and is effective in nonlinear control. The architecture of neural networks is a modified model of self-recurrent structure which has a hidden layer. The self-recurrent neural networks can be used to approximate any continuous function to any desired degree of accuracy and the weights are updated by feedback-error learning algorithm. When a flexible manipulator is rotated by a motor through the fixed end, transverse vibration may occur. The motor toroque should be controlled in such a way that the motor rotates by a specified angle, while simultaneously stabilizing vibration of the flexible manipuators so that it is arresed as soon as possible at the end of rotation. Accurate vibration control of lightweight manipulator during the large changes in configuration common to robotic tasks requires dynamic models that describe both the rigid body motions, as well as the flexural vibrations. Therefore, a dynamic models for a flexible single link robot manipulator is derived, and then a comparative analysis was made with linear controller through an simulation and experiment. The results are proesented to illustrate thd advantages and imporved performance of the proposed adaptive control ove the conventional linear controller.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
• /
• pp.189-197
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• 한국멀티미디어학회논문지
• /
• 제20권11호
• /
• pp.1811-1819
• /
• 2017

As the induction motor is the core production equipment of the industry, it is necessary to construct a fault prediction and diagnosis system through continuous monitoring. Many researches have been conducted on motor fault diagnosis algorithm based on signal processing techniques using Fourier transform, neural networks, and fuzzy inference techniques. In this paper, we propose a fault diagnosis method of induction motor using LPC and DNN. To evaluate the performance of the proposed method, the fault diagnosis was carried out using the vibration data of the induction motor in steady state and simulated various fault conditions. Experimental results show that the learning time of our proposed method and the conventional spectrum+DNN method is 139 seconds and 974 seconds each executed on the experimental PC, and our method reduces execution time by 1/8 compared with conventional method. And the success rate of the proposed method is 98.08%, which is similar to 99.54% of the conventional method.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.178-184
• /
• 2009

An efficient fault diagnosis system is needed for industry because it can optimize the resources management and improve the performance of the system. In this study, a fault diagnostic system is proposed for rotating machine using wavelet packet transform (WPT) and elman neural network (ENN) techniques. In most fault diagnosis for mechanical systems, WPT is a well-known signal processing technique for fault detection and identification. In previous work, WPT can improve the continuous wavelet transform (CWT) used over a longer computing time and huge operand. It can also solve the frequency-band disagreement by discrete wavelet transform (DWT) only breaking up the approximation version. In the experimental work, the extracted features from the WPT are used as inputs in an Elman neural network. The results show that the scheme can reliably diagnose four different conditions and can be considered as an improvement of previous works in this field.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.71-78
• /
• 2007

There have been continuous efforts to automate welding processes. This automation process could be said to fall into two categories, weld seam tracking and weld quality evaluation. Recently, the attempts to achieve these two functions simultaneously are on the increase. For the study presented in this paper, a vision sensor is made, and using this, the 3 dimensional geometry of the bead is measured in real time. For the application in welding, which is the characteristic of nonlinear process, a fuzzy controller is designed. And with this, an adaptive control system is proposed which acquires the bead height and the coordinates of the point on the bead along the horizontal fillet joint, performs seam tracking with those data, and also at the same time, controls the bead geometry to a uniform shape. A communication system, which enables the communication with the industrial robot, is designed to control the bead geometry and to track the weld seam. Experiments are made with varied offset angles from the pre-taught weld path, and they showed the adaptive system works favorable results.

• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.626-631
• /
• 2007

인간의 계속적인 도움 없이 거칠고 변화하며 구조화되지 않은 환경에서 원하는 작업을 수행하는 자율주행 로봇은 확실하거나 불확실한 주변 환경을 극복하는 능력을 지녀야 한다. 이를 위해서는 센서로부터 얻어진 불확실한 정보를 바탕으로 유용한 결론을 도출하는 알고리즘이 요구된다. 본 논문에서는 지식의 표현 및 처리에 유용한 방법으로 주목을 받고 있는 온톨로지에 기반한 자율주행 로봇의 자율주행 알고리즘을 제안하고 이의 타당성을 컴퓨터 모의실험을 통해 보인다.