• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.471-478
• /
• 2011

This paper proposes a method of maximum power point tracking (MPPT) using fuzzy logic control for grid-connected photovoltaic systems (PV). First, for the purpose of comparison, because of its proven and good performances, the incremental conductance (IncCond) technique is briefly introduced. A double fuzzy logic controller (DFLC) based MPPT is then proposed which has shown better performances compared to the IncCond MPPT based approach. Modeling and Simulation in grid-connected PV system results are provided for both controllers under same atmospheric condition based PSCAD/EMTDC. The double fuzzy logic MPPT controller is then simulated and evaluated, which has shown better performances.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.897-899
• /
• 1999

This paper presents a scaling factor tuning method to improve the performance of fuzzy logic controller. Tuning rules and reasoning are utilized off-line to determine the scaling factors based on absolute value of the error and its difference. In this paper We proposed a new method to generate fuzzy logic controllers throught genetic algorithm. The developed approach is subsequently applied to the design of proportional plus integral type fuzzy controller for a dc-servo motor control system. The performance of this control system is demonstrated higher than a conventional fuzzy logic controller(FLC).

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.838-840
• /
• 1997

This presents a design method for fuzzy logic controllers of TCSC using genetic algorithm. Fuzzy logic controllers are applied to damp the dynamic disturbances sum as sudden changes of AC system loads. The dynamic performances of fuzzy logic controllers are compared with those of PI controllers. The simulation results show that dynamic performances of fuzzy controllers have better response than those of PI controllers when the AC system load changes.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.177-180
• /
• 2008

There are many application areas of sensor networks, such as surveillance, hospital monitoring, and home network. These are dependent on the secure operation of networks, and will have serious outcome if the networks is injured. An adversary can inject false data into the network through the compromising node. Ye et al. proposed a statistical en-route filtering scheme (SEF) to detect such false data during forwarding process. In this scheme, it is important that the choice of the threshold value since it trades off security and overhead. This paper presents an adaptive threshold value determining method in the SEF using fuzzy logic. The fuzzy logic determines a security distance value by considering the situation of the network. The Sensor network is divided into several areas by the security distance value, it can each area to uses the different threshold value. The fuzzy based threshold value can reduce the energy consumption in transmitting.

• Journal of Information Processing Systems
• /
• v.9 no.4
• /
• pp.575-591
• /
• 2013

Most of the edge detection methods available in literature are gradient based, which further apply thresholding, to find the final edge map in an image. In this paper, we propose a novel method that is based on fuzzy logic for edge detection in gray images without using the gradient and thresholding. Fuzzy logic is a mathematical logic that attempts to solve problems by assigning values to an imprecise spectrum of data in order to arrive at the most accurate conclusion possible. Here, the fuzzy logic is used to conclude whether a pixel is an edge pixel or not. The proposed technique begins by fuzzifying the gray values of a pixel into two fuzzy variables, namely the black and the white. Fuzzy rules are defined to find the edge pixels in the fuzzified image. The resultant edge map may contain some extraneous edges, which are further removed from the edge map by separately examining the intermediate intensity range pixels. Finally, the edge map is improved by finding some left out edge pixels by defining a new membership function for the pixels that have their entire 8-neighbourhood pixels classified as white. We have compared our proposed method with some of the existing standard edge detector operators that are available in the literature on image processing. The quantitative analysis of the proposed method is given in terms of entropy value.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1879_1880
• /
• 2009

본 논문에서는 제어상황에 따라 Type-1 Fuzzy Logic Controller가 선택적으로 rule을 사용하도록 rule 선택 알고리즘을 제안 한다. 그리고 이를 통해 연산 효율성을 높이는 방법에 관해 논한다. Type-1 Fuzzy Logic Controller는 기존의 제어기에 비해 설계하기 쉽고 성능이 더 뛰어나다. 그러나 제어 변수가 많아질수록 rule의 개수가 늘어나 연산량이 증가하게 된다. 연산량이 많아지면 고성능의 컴퓨터에서는 실시간 연산에 문제가 없으나 산업용 micro controller에서는 실시간 연산을 구현하는데 한계가 발생한다. 본 논문에서는 Type-1 Fuzzy Logic System의 논리구조에 근거하여 Type-1 Fuzzy Logic Controller의 연산량을 감소시킬 수 있는 알고리즘을 제안한다. 제안한 알고리즘은 제어상황에 따라 필요한 rule들만 선택적으로 제어값 도출을 위한 연산에 관여하도록 한다. Matlab 시뮬레이션을 통해 제안한 알고리즘의 유용성과 연산량을 실험하였다. 실험대상은 2륜 이동로봇으로 하였고 step 응답과 전/후진 시 결과를 관찰하였다. 실험 결과 제안한 알고리즘이 기존의 Type-1 Fuzzy Logic Controller에 비해 제어상황에 따라 필요한 rule들만 선택적으로 사용하는 것을 확인하였다. 결과적으로 연산 효율성이 향상되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.40-43
• /
• 1996

To design high quality products at low cost is one of very important task for engineers Design optimization for performances can be one solution in this task. This is robust design which has been proved effectively in many field of engineering design. In this paper, the concept of robust design is introduced and combined to fuzzy optimization and nonsingleton fuzzy logic system. The optimum parameter set points were obtained by the fuzzy optimization method and nonsingleton fuzzy logic system. These methods are applied to a filter circuit, a part of the audio circuit of mobile radio transceiver. The results are compared each other.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.509-511
• /
• 1998

Design of fuzzy logic controllers encounters difficulties in the selection of optimized membership function and fuzzy rule base, which is traditionally achieved by tedious trial-and-error process. In this paper We proposed a new method to generate fuzzy logic controllers throught genetic algorithm(GA). The controller design space is coded in base-7 strings chromosomes, where each bit gene matches the 7 discrete fuzzy value. The developed approach is subsequently applied to the design of proportional plus integral type fuzzy controller for a do-servo motor control system. It was presented in discrete fuzzy linguistic value, and used a membership function with Gaussian curve. The performance of this control system is demonstrated higher than that of a conventional PID controller and fuzzy logic controller(FLC).

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.234-239
• /
• 2009

In this article we present the simulation results of induction motor speed regulation by direct torque control with a classic PI regulator. The MATLAB Simulink programming environment is used as a simulation tool. The results obtained, using a fuzzy logic, shows the importance of this method in the improvement of the performance of such regulation.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.677-680
• /
• 2000

The technique of reinforcement learning algorithm is extended to solve the multiobjective control problem for uncertain dynamic systems. A multiobjective adaptive critic structure is proposed in order to realize a max-min method in the reinforcement learning process. Also, the proposed reinforcement learning technique is applied to a multiobjective satisfactory fuzzy logic controller design in which fuzzy logic subcontrollers are assumed to be derived from human experts. Some simulation results are given in order to show effectiveness of the proposed method.