• 한국재료학회지
• /
• 제18권11호
• /
• pp.604-609
• /
• 2008

The sintering behavior of zircon with silica was investigated. Zircon with 5 vol% of sedimentation $SiO_2$ resulted in the apparent density of $4.45\;g/cm^3$, the diametral tensile strength of $12.125\;kgf/cm^2$, and the micro Vickers hardness of 1283 HV. The dissociation temperature and mechanical characteristics of the $ZrSiO_4$ were changed with different kinds of $SiO_2$. $SiO_2$ addition prevented dissociation of $ZrSiO_4$. Zircon with 5 vol% of sedimentation $SiO_2$ and with 5 vol% of fused $SiO_2$ resulted in increased diametral tensile strength and increased micro Vickers hardness by suppression of $ZrSiO_4$ dissociation and low temperature liquid $SiO_2$ formation. Zircon with fumed $SiO_2$ and quartz $SiO_2$ resulted in decreased diametral tensile strength and decreased micro Vickers hardness because of cristobalite and quartz phase formation and high temperature liquid $SiO_2$ formation. Zircon with 10 vol% of $SiO_2$ resulted in decreased diametral tensile strength and decreased micro Vickers hardness because of weak particle coupling due to excess formation of liquid $SiO_2$.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.580-585
• /
• 1988

In this paper, a low frequency acoustic microscope system has been built for the purpose of detecting subsurface defects in materials. The lateral resolution of acoustic microscope is studied and analyzed in order to evaluate that system performance. And a NDE technique is demonstrated by using this system. In the focused and defocused mode of operation, the acoustic microscope system showed in experiment that its lateral resolution was about 0.5 mm at a frequency of operation of 3MHz on a fused-quartz sample with seeded circular cracks ranged in size from 0.2 mm to 1.0 mm in diameter wihtin 1 mm of the surface. It also showed the acoustic image of 100 won coin with fine contrast.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.203-207
• /
• 1980

The optical absorption of high index glasses of the system TiO2-BaO-B2O3 prepared from the raw materials for an optical waveguide glass has been measured in the near ultraviolet region. The amount of Ti3+ in the glass could be reduced to a level less than 5 ppm by melting a batch added with pure nitric acid, using a fused quartz crucible in an oxygen gas atmosphere. The ultra-pure glass of 10mm thick prepared in such a way did not show any appreciable color even for the one containing 30 mol% TiO2 and having refractive index nD of 1.84 and Abbe's number vD of 28.8. The wavelength of ultraviolet absorptin edge was longer for the glass of higher index and higher dispersdion. The melting of a TiO2 containing glass in a platinum crucible resulted in a coloration of the glass due to the dissolved plutinum from the crucible, which was more intense for the one containing larger amount of TiO2.

• 한국결정성장학회지
• /
• 제8권3호
• /
• pp.487-492
• /
• 1998

ICP(Inductively Coupled Plasma)를 열원으로 출발용액의 농도변화 및 $TiO_2$ 첨가로 $SnO_2$와 $(Sn,Ti)O_2$미분말을 합성하였으며 SnO2 박막을 제조하였다. 각각 합성된 $SnO_2$ 미분말은 모두 tetragonal의 rutile형으로서 입자들의 평균입경은 30nm로 매우 미세하였으며, 좁은 입도분포를 나타내었다. $TiO_2$를 첨가하였을 경우 $SnO_2-TiO_2$ 미분말은 고용체를 이루었으며, 첨가량이 증가함에 따라 결정성은 감소하였다. ICP tail flame으로 fused quartz 기판을 가열하여 (101)면을 주 peak로 하는 $SnO_2$ 박막을 얻었다.

• The Korean Journal of Ceramics
• /
• 제2권1호
• /
• pp.1-10
• /
• 1996

Transparent conducting $SnO_2$-based thin films have been coated on float substrates such as fused quartz, and ceramic fiber cloths such as the Nexel and E-glass cloth from tin alkoxides by the sol-gel technique. Also, thin films of alternating layers of $SnO_2$ and $SiO_2$ have been fabricated by dip coating. The sheet resistance and average visible transmittance of the films were investigated in the aspect of the applications as transparent electrodes such as liquid crystal displays, photo-detectors and solar cells. The Nextel and E-glass cloths coated with antimony-doped tin oxide (ATO) had sheet resistance of as low as $20 \;ohm/{\Box}$ and $120ohm/\;{\Box}$, respectively. The promotion effects of additives as $La_2O_3$ and Pt on the ethanol gas sensing properties of the films were investigated in the aspects of the applications as an alcohol sensor and a breath alcohol checker. Possible evidence of quantum well effects in the oxide multilayers of $SnO_2$ and $SiO_2$ was investigated.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.70-73
• /
• 2003

Sum-frequency vibrational spectroscopy has recently been used to investigate the surface of the various polymers and was able to find the chemical compositions and structures specific to the surface. Here we report our studies on two specific polymer samples to demonstrate its capability. Polyimide thin films were made by spin coating on fused quartz and $CaF_2$ substrates. The sum-frequency signal originating mainly from the air/polymer interface showed markedly different spectra, indicating the structural change of the polymer surface depending on the underlying substrate. Various polyethylene surfaces were also investigated by sum-frequency vibrational spectroscopy. The surface of polyethylene samples in the CH-region showed different sum-frequency spectra, presumably due to the trace amount of additives having much higher concentration at the air/polymer interface. These examples demonstrate the surface and interface of the polymer could have different structure and chemical composition from those of a bulk, which can be studied effectively by surface nonlinear optical spectroscopy.

• 한국음향학회지
• /
• 제14권6호
• /
• pp.40-47
• /
• 1995

초음파펄스의 주파수해석에 의하여 재료의 음속과 감쇠계수 및 복소모듈러스를 동시에 측정하는 시스템을 구축하고 그 특성을 평가하였다. 이 시스템은 초음파현미경의 기계구동부와 공진주파수 85MHz의 ZnO 평면 트랜스듀서에 의해 구성되며, 음속은 시료의 표면과 저면에서 반사되어온 두개의 펄스파가 동시에 포함되도록 게이트한 후 파워스펙트럼을 구하였을 때 생기는 주파수영역에서의 극대점(또는 극소점)간의 간격으로부터, 감쇠계수는 그 두 펄스파의 각각에 대한 파워스펙트럼준위와 표준시료 표면으로 부터의 반사파의 파워스펙트럼준위로부터 구하여진다. 구축된 시스템을 용융석영, 폴리에스텔막등의 재료에 적용한 결과 정도 높은 계측이 가능함을 알았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.114-114
• /
• 2010

In this study, structural properties and photoluminescent characteristics of thin film rhombohedral zinc orthosilicate doped with manganese ($Zn_2SiO_4:Mn$) were investigated. The $Zn_2SiO_4:Mn$ films showed a pronounced absorption edge in the near ultraviolet wavelength region and a high optical transparency in the visible spectral range. The maximum transmittance reached 0.922 at 597 nm, which was very close to the transmittance of the fused quartz substrate alone (0.935). The $Zn_2SiO_4:Mn$ films were composed of rhombohedral polycrystalline grains with random crystallographic orientation. The broad-band photoluminescence emission peaked at around 525 nm was observed from the $Zn_2SiO_4:Mn$ films, which was ascribed to the radiative relaxation from the $^4T_1$ lowest excitation state to $^6A_1$ ground state of 3d5 electrons in divalent manganese ion. The excitation band exhibited a peak maximum at 259 nm in the near ultraviolet region, which was considered to be associated with the charge transfer transition of divalent Mn ion in the $Zn_2SiO_4$ system.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.99-103
• /
• 2015

One-dimensional photonic crystals (1D PCs) were fabricated by RF sputtering technique on p-Si (100), and fused quartz substrates. The 1D PCs structures consisted of $TeO_x$ (x=1.42), and $SiO_2$ with the difference refractive index. In order to estimate the effect on a defect level within 1D PCs structures, samples were prepared with both normal, and defect mode. The structural and optical properties were confirmed by Scanning electron microscope (SEM), and Ultraviolet visible near-infrared spectrophotometer (UV-VIS-NIR) respectively. In the case of a 1D PC normal mode without defect layer, it had a photonic band gap (PBG) in the near infrared (NIR) region. In the case of a 1D PC defect mode with defect layer, it had a sharp transmission band owing to a defect level, and moved towards the longer wavelength after exposing He-Cd laser with a wavelength of 325 nm.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.608-613
• /
• 2021

This study investigated the reaction between clay and Mn. Mn was coated using a manganese sulfate on porcelain plate and sintered from 1,100 ℃ to 1,250 ℃. The body begin to shrink around 950 ℃ with the increase in temperature and rapidly progressed after 1,100 ℃. Shrinkage of celadon body was performed at a lower temperature than for other substrates. Quartz, kaolin, and feldspar were the main crystalline phases of the starting materials, but they became mullite and crystobalite during the firing process, and some formed amorphous glass. When manganese sulfate was applied and fired, manganese oxide was fused, and some manganese oxide reacted with the substrate to show a dense microstructure different from that of the substrate; the substrate had pores. The manganese coated porcelain fired at 1,200 ℃ had L^* values of 55.25, 36.87, and 37.13 for the white ware, celadon body, and white mixed ware, respectively; with a^* values of 4.63, 3.07, and 2.15, and b^* values of 7.93 and 3.98, it was found to be 3.42. This result indicated that the color of the surface was affected during firing by the chemical reaction between the substrate and manganese.