• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.151-157
• /
• 2020

This study is to find out the effectiveness by Infant CPR method of a single rescuer. It was conducted for 51 general public. And typical infant CPR method by a single rescuer and a new method, CPR with two thumb chest compressions wrapped in both hands over the head were compared. SPSS 22.0 was used as an analysis method and to compare the both CPR methods, Paired t-test was used. As a result of the study, the average chest compression depth(39.38±1.07 mm) by CPR with two thumb chest compressions wrapped in both hands over the head was significantly high(p<0.001). Ease of mouth-to-mouth resuscitation(p<0.001), convenience of CPR method(p<0.001), and finger pain level(p<0.001) had a significant difference. As for the preference of the CPR method, 80.4%(41 people) preferred CPR with two thumb chest compressions wrapped in both hands over the head. In this study, CPR with two thumb chest compressions wrapped in both hands over the head showed more effective results than typical CPR method. However, as a virtual study using mannequins, further research is needed to apply high-quality CPR methods to field.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.127-132
• /
• 2011

We acquired and interpreted more than 650 km of high-resolution seismic reflection profiles in the Hupo Basin, offshore east coast of Korea at $37^{\circ}N$ in the East Sea (Japan Sea) to image shallow and basement deformation. The seismic profiles reveal that the main depocenter of the Hupo Basin in the study area is bounded by the large offset Hupo Fault on the east and an antithetic fault on the west; however, the antithetic fault is much smaller both in horizontal extension and in vertical displacement than the Hupo Fault. Sediment infill in the Hupo Basin consists of syn-rift (late Oligocene. early Miocene) and post-rift (middle Miocene.Holocene) units. The Hupo Fault and other faults newly defined in the Hupo Basin strike dominantly north and show a sense of normal displacement. Considering that the East Sea has been subjected to compression since the middle Miocene, we interpret that these normal faults were created during continental rifting in late Oligocene to early Miocene times. We suggest that the current ENE direction of maximum principal compressive stress observed in and around the Korean peninsula associated with the motion of the Amurian Plate induces the faults in the Hupo Basin to have reverse and right-lateral, strike-slip motion, when reactivated. A recent earthquake positioned on the Hupo Fault indicates that in the study area and possibly further in the eastern Korean margin, earthquakes would occur on the faults created during continental rifting in the Tertiary.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.5-12
• /
• 2009

Soil samples from the King Sejong Station in Antarctic and Vladivostok were tested in the laboratory and specific gravity, compaction curve, grain size distribution were determined. The effect of temperature change on the thermal conductivity, unfrozen water content, compressive strength were investigated. In addition, the change of tensile strength with temperature of the soil from Vladivostok was measured. Samples for the compressive strength test and tensional strength test were prepared in a mould with a fixed volume to prevent swelling. Also the effects of temperature and water content change on those strength were compared. Results from the thermal conductivity test showed that thermal conductivity values for both soils was larger at temperatures below freezing than those above freezing. The unfrozen water content dropped rapidly within a temperature range of $0{\sim}-5^{\circ}C$ and then gradually decreased further $-20^{\circ}C$. Compressive strength test results showed various stress/deformation curves with a change in water content. Sandy soil of the King Sejong Station had a much larger strength than ice at an identical temperature, while clayey soil of Vladivostok had a smaller strength than ice in the initial stage, but showed a larger strength at temperatures belows $-15^{\circ}C$. Tensile strength tests revealed an increase in the strength with a decreasing temperature.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.1
• /
• pp.25-30
• /
• 2013

Purpose: Many surgical procedures in oral and maxillofacial area can induce trauma to the peripheral nerve. The aim of the study is to evaluate the effects of short-term steroid therapy on nerve recovery after crush injury. Methods: Sixteen rats were randomly divided into two groups. The right sciatic nerves were exposed, crushed, and sutured. The control group was not given steroids. The test group was injected with dexamethasone disodium phosphate (2 mg/kg body weight/day) for 7 days. In all animals, compound muscle action potential (CMAP) was recorded before and at 1, 7, 14, 21, and 28 days after injury. Results: The amplitude of the CMAP before and at 1, 7, 14, 21, and 28 days after injury were $53.20{\pm}4.80$ mV, $20.12{\pm}5.38$ mV, $30.01{\pm}14.15$ mV, $31.14{\pm}13.56$ mV, $31.73{\pm}16.33$ mV, and $37.23{\pm}16.98$ mV in the control group, and $55.25{\pm}6.72$ mV, $18.62{\pm}6.26$ mV, $29.50{\pm}13.06$ mV, $32.90{\pm}13.226$ mV, $30.17{\pm}11.80$ mV, and $38.41{\pm}12.27$ mV in the test group, respectively. The nerve conduction velocity was $18.82{\pm}3.94$ m/s, $16.73{\pm}3.48$ m/s, $19.60{\pm}2.45$ m/s, $18.68{\pm}3.94$ m/s, $18.02{\pm}3.51$ m/s, and $19.25{\pm}3.88$ m/s in the control group, and $18.94{\pm}3.48$ m/s, $17.28{\pm}2.53$ m/s, $7.57{\pm}2.54$ m/s, $18.77{\pm}2.12$ m/s, $19.48{\pm}1.55$ m/s, and $19.22{\pm}2.97$ m/s in the test group, respectively. There was no significant difference between both groups (P>0.05). Conclusion: This study did not show any therapeutic effect of short-term administration of steroids on injured rat sciatic nerve. Further studies are needed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4678-4702
• /
• 2018

Traffic Matrix estimation has always caught attention from researchers for better network management and future planning. With the advent of high traffic loads due to Cloud Computing platforms and Software Defined Networking based tunable routing and traffic management algorithms on the Internet, it is more necessary as ever to be able to predict current and future traffic volumes on the network. For large networks such origin-destination traffic prediction problem takes the form of a large under- constrained and under-determined system of equations with a dynamic measurement matrix. Previously, the researchers had relied on the assumption that the measurement (routing) matrix is stationary due to which the schemes are not suitable for modern software defined networks. In this work, we present our Compressed Sensing with Dynamic Model Estimation (CS-DME) architecture suitable for modern software defined networks. Our main contributions are: (1) we formulate an approach in which measurement matrix in the compressed sensing scheme can be accurately and dynamically estimated through a reformulation of the problem based on traffic demands. (2) We show that the problem formulation using a dynamic measurement matrix based on instantaneous traffic demands may be used instead of a stationary binary routing matrix which is more suitable to modern Software Defined Networks that are constantly evolving in terms of routing by inspection of its Eigen Spectrum using two real world datasets. (3) We also show that linking this compressed measurement matrix dynamically with the measured parameters can lead to acceptable estimation of Origin Destination (OD) Traffic flows with marginally poor results with other state-of-art schemes relying on fixed measurement matrices. (4) Furthermore, using this compressed reformulated problem, a new strategy for selection of vantage points for most efficient traffic matrix estimation is also presented through a secondary compression technique based on subset of link measurements. Experimental evaluation of proposed technique using real world datasets Abilene and GEANT shows that the technique is practical to be used in modern software defined networks. Further, the performance of the scheme is compared with recent state of the art techniques proposed in research literature.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4335-4340
• /
• 2016

Background: Bone metastasis is a single condition but presents with various patterns and severities. Skeletal-related events (SREs) deteriorate overall performance status and reduce quality of life. However, guidelines for early detection and management are limited. This study includes a survey of the prevalence of bone metastasis in cases with common cancers in Thailand as well as a focus on survival patterns and SREs. Materials and Methods: A retrospective cohort analysis was conducted using a database of the Chiang Mai Cancer Registry and the Musculoskeletal Tumor Registry of the OLARN Center, Chiang Mai University. The prevalence of bone metastasis from each type of primary cancer was noted and time-to-event analysis was performed to estimate cancer survival rates after bone metastasis. Results: There were 29,447 cases of the ten most common cancers in Thailand, accounting for 82.2% of the entire cancer registry entries during the study period. Among those cases, there were 2,263 with bone metastases, accounting for 7.68% of entries. Bone metastasis from lung, liver, breast, cervix and prostate are common in the Thai population, accounting for 83.4% of all positive cases. The median survival time of all was 6 months. Of the bone metastases, 48.9% required therapeutic intervention, including treatment of spinal cord and nerve root compression, pathological fractures, and bone pain. Conclusions: The frequency of the top five types of bone metastasis in Thailand were different from the frequencies in other countries, but corresponded to the relative prevalence of the cancers in Thailand and osteophilic properties of each cancer. The results of this study support the establishment of country specific guidelines for primary cancer identification with skeletal lesions of unknown origin. In addition, further clinical studies of the top five bone metastases should be performed to develop guidelines for optimal patient management during palliative care.

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.37-42
• /
• 2012

Purpose: To consider the proper management of proximal humerus fracture on gunshot wounds. Materials and Methods: A 28-year-old male patient, who sustained a gunshot injury on the left arm 5 days ago, was admitted through the emergency department. Although he underwent an emergency surgery (bullet fragment removal and debridement), there remained bullet fragments around the proximal humerus fracture site. The wound seemed to be infected and a partial dehiscence occurred. No neurologic deficit was noted. Immediate exploration and debridement were performed, and an external fixator was applied to restore the anatomical alignment and manage the wounds. Intravenous antibiotics were administered. On the 9th postoperative day, wound debridement was done again, and cement beads mixed with antibiotics were inserted. After two weeks, the external fixator was removed, and the pin sites were closed after debridement. One week later, the open reduction and internal fixation with locking compression plate and screws were done. Result: At 3 months after the internal fixation, the bone union was obtained with satisfactory alignment of the humerus. Conclusion: The severity of the soft tissue injury influences the fracture management plan. Further, the risk on lead toxicity should be considered.

• Clinics in Shoulder and Elbow
• /
• v.11 no.1
• /
• pp.41-45
• /
• 2008

Purpose: To review the clinical and radiological results after an open reduction and internal fixation with a T-shaped LCP for unstable distal clavicle fractures. Materials and Methods: From February 2005 to June 2006, ten patients with distal clavicle Neer type II fractures were treated with an open reduction and internal fixation with a T-shaped LCP. Bony union was identified by plain radiography. The clinical results were analyzed according to the UCLA scoring system. Results: The mean time to fracture union was 9weeks and union was achieved in all cases. The mean UCLA score was 33.4 (30-35); excellent in 8 cases and good in 2 cases. In one case, loosening of one distal screw was occured and mild AC joint subluxation was observed in another case. Conclusion: 3.5 mm T-shaped LCP fixation is a useful technique for treating unstable distal clavicle fractures. This procedure provide stable fixation with no further AC joint injury.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.2
• /
• pp.3-11
• /
• 1998

Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) to examine the effect of liner component coatings by oxidized starch on the properties of corrugated board. Both bursting strength and edgewise compression strength(ECS) of corrugated board were improved by coating of its liner components with oxidized starch. Bursting strength of corrugated board rapidly increased with an initial increase of coating weight, but as the coating weight further increased, there was no increase in bursting strength. The results showed 30.3% improvement for $2.32g/m^2$ coating on outside liner component, 36.8% improvement for $4.84g/m^2$ coating on inside liner component and 39.9% improvement for $7.16g/m^2$ coating on both liner components in bursting strength of corrugated board. Regardless of treated liner components, ECS of corrugated board was improved by coating of oxidized starch, and especially greater improvement was accomplished when corrugated board was coated on inside liner component or both liner components at low level of coating weight - 11.3% improvement for $1.58g/m^2$ coating on Inside liner component and 11.9% improvement for $2.99g/m^2$ coating on both liner components.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.189-200
• /
• 2017

Nonplanar structural walls with C-shaped and H-shaped sections have been used as an efficient lateral force-resisting system for building structures. Since the nonplanar walls are subjected to axial load and bending moments about two orthogonal axes, complicated section analysis is required for flexure-compression design. In the present study, a straightforward design method for biaxially loaded C- and H-shaped walls was proposed by modifying the existing load contour method for columns with symmetric solid sections. For this, a strain compatibility section analysis program that can calculate biaxial moment strengths of arbitrary wall section was developed and its validity was verified by comparing with existing test results. Then, through parametric study, the interaction of biaxial moments at constant axial loads in prototype C- and H-shaped walls was investigated. The results showed that, due to unsymmetrical geometry of the wall sections, the biaxial interaction was significantly affected by the moment directions and axial loads. From those investigations, non-dimensional contour equations of the biaxial moments at constant axial loads for C- and H-shaped walls were suggested. Further, design examples using the proposed contour equations were given for engineering practice.