일반적으로 사질토 지반의 원형수직구에 설치된 흙막이벽에 작용하는 토압은 삼차원 아칭효과로 인하여 평면변형조건의 옹벽에 작용하는 토압과는 다르며, 원통형 벽체의 설계를 위해서는 벽체에 작용하는 토압의 정확한 산정이 필요하다. 원형수직구에 설치된 벽체 배면지반의 파괴모드는 지중응력상태에 의존하게 되는데, 파괴모드는 실질적으로 원기둥형 활동면을 갖는 경우와 깔대기형 파괴면을 갖는 경우로 구분할 수 있다. 기존의 연구결과에 의하면 각각의 파괴모드에 대하여 원통형 벽체에 작용하는 토압공식이 제안되었으나, 도입된 가정으로 인하여 불합리한 경향을 보이는 문제점이 있다. 본 연구에서는 원통형 벽체에 작용하는 토압을 산정하기 위하여 각각의 파괴모드에 대하여 제안된 토압공식을 살펴보고, 각 토압공식에서 가정된 사항을 수정 제안하였다. 각각의 파괴모드에 대하여 수정 제안된 토압공식들은 상재하중과 벽면마찰을 고려하였으며, 활동면에서의 힘의 평형관계를 실제적으로 고려하였다.
중국 오대연지 신기 화산인 라오헤이산과 후오샤오산은 $1720\~1721$년에 분출하였다. 이 화산은 각각 K이 풍부한 포노테프라이트질 화성쇄설층과 용암으로 구성되는 스코리아구와 스패터구를 이루고 모두 넓은 용암류역을 가진다. 라오헤이산 스코리아구는 내부구조가 복잡하고 선${\cdot}$후기 화산체로 형성된 복성복식 화산이며 후기 화산체의 중앙부에는 깔때기형의 분화구가 있다. 후오샤오산 스패터구는 단성단식 화산이며 화산체 중앙부에 피트 분화구가 형성되어 있다. 화산층서는 먼저 라오헤이산이 형성되었고 후에 후오샤오산이 형성되었음을 지시한다. 또한 라오헤이산에서의 분출 과정이 용암분천과 스트롬볼리언 분출을 포함하는 폭발성분출과 분류성 분출의 5개 단계를 거치는 반복적 패턴을 따랐다는 것을 지시하고, 후오샤오산에서 스트롬볼리언 분출과 용암분류의 2개 단계를 거치는 규칙적 패턴을 따랐다는 것을 지시한다.
This study developed a rainwater harvesting system for the irrigation of upland on sloping area. The assessment of water supply capacity was evaluated in farm field experience. This system consists of a water catchment device and a collapsible storage tank. The water catchment device was designed to collect runoff water in natural channel of 500 mm width into a pipe of 50 mm inner diameter. The device has funnel-shaped plan and cross-section of square. The storage capacity of the collapsible water tank was caculated to meet the water demand for irrigation in 30 a cultivated land for 10-year frequancy drought. The tank has a cuboid shape with a capacity of 30 ㎥, 5 m in width and length, 1.2 m in height. This system can supply 92% of the water required for drop irrigation of red pepper and 88% of the water required for drop irrigation of onions in 30 a cultivation land during the month of May and June. In the case of 16-dry days of 10-years frequency, this system is capable to irrigate 100% of required water for red pepper and onion, 76.7% of required water for Omija (Schisandra chinensis), and 51.5% of required water for autumn kimchi cabbage.
The purpose of this study was to observe the morphologic change of dentinal surface, adhesion in interface between dentin and bonding agents, and penetration pattern of resin tags into dentinal tubles according to bonding procedure of ONE-STEP universal adhesive system. Ten extracted human molars were mounted in dental stone and sectioned to expose mid-coronal occlusal dentin and again sectioned tooth crown apically. Specimens were randomly assigned to three groups for dentin conditioning with 32% phoshoric acid, two coats of bonding agents after dentin conditioning, and bond of composite resin. The surfaces of dentin were treated with etch ant and applied bonding agent, and bonded composite resin according to the directions of manufacturer. Specimens which were boned composite were sectioned longitudinally for observing interfaces between resin and dentin. Two of specimens which were sectioned longitudinally were immersed in 6 N HCL for 30 seconds and 1% NaOCL for 12 hours to partially demineralize and deproteinize the dentin substrate. Each specimen was mounted on a brass stub, sputter-coated with gold and observed under SEM. The result were as follows : 1. On the dentinal surface which was conditioned with 32% phosphoric acid. the smear layer was completely removed. orifices of dentinal tubules were opened 3-$5{\mu}m$ wide. and dentinal surface was irregular. 2. On the dentinal surface which was applied ONE-STEP. bonding agent. resin particles were observed on the orifices of dentinal tubules and intertubular dentin. 3. There were close adaptation between dentin and resin and were the pattern which composite invaded into dentin. 4. 1-$3{\mu}m$-wide hybrid layer was visible in the interface between dentin and resin. 5. Long and funnel shaped resin tags were observed in demineralized specimens. and the surfaces of tags were rough.
Influenced by the alternating effects of dynamic and static pressure during the mining process of close range coal seams, the surrounding rock support of cross mining roadway is difficult and the deformation mechanism is complex, which has become an important problem affecting the safe and efficient production of coal mines. The paper takes the inclined longwall mining of the 10304 working face of Zhongheng coal mine as the engineering background, analyzes the key strata fracture mechanism of the large inclined right-angle trapezoidal mining field, explores the stress distribution characteristics and transmission law of the surrounding rock of the roadway affected by the mining of the inclined coal seam, and proposes a segmented and hierarchical support method for the cross mining roadway affected by the mining of the close range coal seam group. The research results indicate that based on the derived expressions for shear and tensile fracture of key strata, the ultimate pushing distance and ultimate suspended area of a right angle trapezoidal mining area can be calculated and obtained. Within the cross mining section, along the horizontal direction of the coal wall of the working face, the peak shear stress is located near the middle of the boundary. The cracks on the floor of the cross mining roadway gradually develop in an elliptical funnel shape from the shallow to the deep. The dual coupling support system composed of active anchor rod support and passive U-shaped steel shed support proposed in this article achieves effective control of the stability of cross mining roadways, which achieves effective control of floor by coupling active support and preventive passive support to improve the strength of the surrounding rock itself. The research results are of great significance for guiding the layout, support control, and safe mining of cross mining roadways, and to some extent, can further enrich and improve the relevant theories of roof movement and control.
Dentin hypersensitivity must be one of the most frequent postoperative complaints in periodontal patients. Obliterating the open dentinal tubules or decreasing the diameter of their orifices would, therefore, be an objective of treatment for hypersensitive teeth. The purpose of this study was to evaluate the effect of a pulsed Nd:YAG laser irradiation on obliteration of dentinal tubules and to determine any difference according to irradiation methods. The 45 posterior teeth that had been extracted due to periodontal disease were initially treated with tetracycline HCI(100 mg/ml, 4 min.) to remove the smear layer after root planing. The root surfaces were then irradiated by a pulsed Nd:YAG laser(EL.EN.EN060, Italy) by different laser beam spot size and different exposure condition: ${\cdot}$ group 1: irradiated group by small spot(beam diameter=1mm, lW, 2 sec) ${\cdot}$ group 2: irradiated group by large spot(beam diameter=10mm, 1W, 200 sec) ${\cdot}$ group 3: irradiated group by gradual increase of watt (from 0.3W to 1.0W), beam diameter=4mm ${\cdot}$ group 4: irradiated group by fixed watt(1.0 W), beam diameter=4mm ${\cdot}$ control group: no irradiation but root planing and tetracycline HCI conditioning only. Additionally, the specimens were retreated with tetracycline HCI(100mg/ml, 4min.) to evaluate the stability of obliteration effect by Nd:YAG laser. Specimens were examined under the scanning electron microscope(JEOL, JSM-840A, Japan). Photomicrographs were taken at ${\times}4,000$ magnification and were analyzed statistically. The results were as follows: l. Scanning electron micrographs of root surface treated by tetracycline HCI alone(control group) showed widened, funnel-shaped dentinal tubules, while those of the root surface irradiated by various methods showed partially or completely obliterated dentinal tubules and various surface alterations, eg, flat, multiple pitted, melted and resolidified surface at the same energy density. 2. There was no significant difference in the obliteration effect of dentinal tubules between group 1 and group 2, and between group 3 and group 4(p>0.05). 3. The obliteration effect of dentinal tubules by a Nd:YAG laser irradiation was relatively stable to tetracycline HCI. The results demonstrate that a pulsed Nd:YAG laser irradiation within 1.0W, regardless of irradiation methods, can obliterate dentinal tubules effectively.
주머니 형태의 흡입식 포충낭을 형성하는 통발속(Utricularia) 식물은 포충낭에 발달하는 감각모 및 다양한 분비모로 능동적인 식충의 기능을 수행한다. 본 연구에서는 물속에 서식하는 수생형 통발(U. japonica)과 땅속에 서식하는 지생형 땅귀개(U. livida)2종 포충낭의 형태적 분화 특성을 광학 및 전자현미경을 이용하여 연구하였다. 이들 2종의 포충낭 내부 및 외부 표피조직에 발달하는 먹이 감지구조 및 감각모와 분비모의 분화양상은 서식환경에 따라 매우 상이하였다. 수생형 통발의 포충낭 입구에는 분지된 안테나 및 부속지들이 위치하고, 덧문에는 감각모 4개가 분포하였다. 포충낭의 외부 표피조직에는 반구형의 작은 단세포 분비모들이 산재하나 내부로 향한 입구 부위에는 무병 및 capitate형 분비모들이 점액물질을 분비하여 덧문을 여닫으며 먹이 포획을 하였다. 포충낭 내부 전체 표피표면에는 4분지모들이 밀생하나, 2분지모들은 덧문 하단의 일부 조직에만 수직으로 발달하였다. 반면, 지생형 땅귀개의 포충낭 입구에는 내부를 향하면서 좁아지는 누두상의 먹이 접촉 및 감지구조를 형성하였다. 이들의 배축면에는 다세포성 비분비모들이 규칙적으로 배열하나 향축면에는 여러형태의 분비모가 밀생하여 입구를 피복하며 덧문은 외부로 노출되지 않았다. 덧문에는 2개의 감각모가 발달하며 포충낭 내부에는 H-자 형태의 4분지모가 소수 발달하였고, 2분지모는 덧문 하단 표면에 수평으로 배열하였다. 먹이 유입 시 이들 분비모에서는 다량의 분비물질이 분비되어 포충낭 내부 전체표면을 피복하였다. 이상의 결과는 수생 및 지생 통발 2종 포충낭의 형태 분화 및 구조적 특성이 이후 흡입식 포충낭에서의 식충기작 및 세포수준에서의 미세구조 연구에서 유용한 중요 자료가 될 것으로 생각된다.
이 논문은 자동차 흡배기 장치, 발전기 튜닝 및 배기 측 인화성 물질 유입에 관련된 화재에 대한 사례를 분석하고 연구하는 것이다. 첫 번째 사례는, 흡기와 배기 장치의 튜닝한 상태에서 자동차의 시동을 켜 놓고 정차된 상태에서 가연성 스티로폼이 자동차 하체로 유입되고, 배기 열에 의해 불이 붙었고, 이 열원에 누설된 연료가 화재를 확대시킨 것으로 확인되었다. 두 번째 사례는 실내의 오디오 시스템을 튜닝하고 필요한 전기의 양을 증대하기 위해 발전기 용량을 높임으로써 발전기와 연결된 배선이 과열되어 화재가 발생된 것으로 확인되었다. 세 번째 사례의 원인은 정비사가 오일을 교환한 다음 플라스틱 용기로 된 깔때기를 엔진 내부에 둔 것이 엔진의 배기열에 의해 화재가 발생된 것으로 확인되었다. 따라서, 엔진의 흡배기 시스템과 발전기 시스템을 개조하지 않도록 하여야 하며, 자동차를 수리할 때나 점검할 때 배기측에 이물질이 유입되어 화재가 발생하지 않도록 자동차의 관리에 세심한 주의를 하여야 한다.
본 논문은 서해 군산분지 퇴적층 내에서 발견되는 다양한 화성암들을 탄성파 반사상에 따라 분류하고 그 공간적 분포 양상을 도시하는 과정에 대해 상술한다. 연구지역인 서해 대륙붕 군산분지의 북동소분지, 남서소분지, 남동소분지 내에서 총 6종류의 분출 화성암 반사상과 3종류의 관입 화성암 반사상이 중생대 후기 백악기, 신생대 에오세 및 전기 마이오세, 신생대 제4기 층에서 발견되었다. 분출 화성암은 그 크기, 외형, 내부 층리구조에 따라 (1) 높이 200 m 이하의 고깔형 화산체들로 1회성 단성화산 분화를 통해 형성된 것으로 추정되는 단성화산체(E.mono), (2) 단성화산체들이 모여 높이 500 m 이내의 하나의 화산체를 형성하는 단성화산복합체(E.comp), (3) 높이 1 km 이상 직경 15 km 이상으로 내부에 복수의 층이 인지되는 성층화산체(E.strato), (4) 기반암 저지대의 정단층 주변에서 고반사 특성을 보이는 열극 분출암(E.fissure), (5) 저각 사면부와 내부에 직경 약 2 km 화도 구조를 보여주는 마르-다이아트림(E.maar), (6) 퇴적층을 교란하는 직경 1 km 이내 파이프형 구조를 갖는 열수분출공(E.vent)으로 구성된다. 관입 화성암은 상부 퇴적층의 변형구조를 통해 인지되며, (1) 수평형, 계단형, 종지형 등 다양한 수직/수평 관입 기하를 나타내는 암맥 및 암상(I.dike/sill), (2) 직경 1-3 km의 뿔 또는 기둥 모양 관입암체인 화성암주(I.stock), (3) 상부 퇴적층을 광범위하게 변형시키는 폭 10 km 이상의 관입암체인 저반/병반(I.batho/lac)으로 구성된다. 분출 화성암은 주로 군산분지 남서소분지 내 백악기 및 신생대 고제3기 에오세 층 내에서 인지되며, 관입암체는 주로 남동 및 남서 소분지 내에서 발견된다. 열수분출공은 군산분지 전역에서 발견되며 활동시기는 전반적으로 중기 마이오세 이후로 일부는 현재까지 활동중인 것으로 보인다.
정상치아와 이환치아 및 구연산에 의하여 탈회한 치근면에대한 치주인대세포의 부착상태를 비교관찰 하기 위하여 정상치아와 이환치아를 취하여 정상군, 이환치근의 치근면활택술군 및 구연산처리군으로 분류하고 시험관적 실험을 통하여 관찰하였다. 세포부착실험전 각 군의 치근면의 형태를 주사전자현미경을 이용하여 관찰하였으며, 사람의 정상소구치에서부터 얻어진 치주인대세포를 배야하여 각 군의 절편을 함유한 조직배양기에 ml당 $4.5{\times}\;10^4$개의 세포를 가진 배양액 1ml씩을 넣고 동일조건하에서 30분, 1시간, 2시간, 6시간, 12시간 및 24시간 동안 배양한 후 세포의 부착이 일어난 후 상태를 주사전자현미경을 이용하여 관찰하였고, 세포증식정도를 알아보기 위하여 각 절편에 $5{\times}10^4$개의 세포가 함유된 배양액 1ml씩을 넣고 6시간동안 배양 후, 새 배양기에 옮기고 24, 48, 72시간동안 배양하여 trypsin 처리로 세포를 분리시킨 후 광학위상차 현미경을 이용, 치근단위면적당 증식된 세포수를 측정하여 다음과 같은 결과를 얻었다. 세포부착실험전 각 군의 치근면 형태를 관찰하였을 때 구연산처리군에서는 교원섬유의 노출부위라고 여겨지는 미세한 돌출구조들을 관찰할 수 있었으며 상아세관의 노출부위라고 여겨지는 함몰양상이 치근활택술군에 비하여 현저하였고 정상치아군에서는 이러한 양상을 관찰할 수 없었다. 실험 각 군 및 대조군 사이에서 세포들의 형태적인 차이점은 분명하지 않았으나 구연산처리군에서 다른 군들보다 초기의 세포부착양상이 다소 빠르게 진행 됨이 관찰되었다. 세포배양 개시 후 6시간이 경과 한 후에는 모든 군에서 공히 세포의 형태가 초기의 구형의 형태에서 편평한 세포의 형태로 변화되기 시작함이 관찰 되었고 24시간 이후에는 모든 군에서 세포들이 치근면에 납작하게 부착되고 일반적인 섬 유아세포의 형태로 변화되어 셰포의 전개가 완성된 양상이 보였다. 세포증식율의 실험에서는 24시간 후 증식된 세포 수는 치근면활택술군에서 가장높게 나타났으며 정상군에서 가장 낮은 수치를 보였으며 48시간 및 72시간후 측정에서는 구연산처리군이 다른 군들에 비해 더 많은 수의 세포증식을 관찰할 수 있었으며 각 군간의 차이는 통계학적으로 유의하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.