• Composites Research
• /
• v.16 no.5
• /
• pp.21-27
• /
• 2003

Using the theory of linear piezoelectricity, the dynamic response of a central crack in a functionally graded piezoelectric ceramic under anti-plane shear impact is analyzed. We assume that the properties of the functionally graded piezoelectric material vary continuously along the thickness. By using the Laplace and Fourier transform, the problem is reduced to two pairs of dual integral equations and then into Fredholm integral equations of the second kind. Numerical values on the dynamic stress intensity factors are presented to show the dependence of the gradient of material properties and electric loading.

• Coupled systems mechanics
• /
• v.6 no.1
• /
• pp.97-111
• /
• 2017

The present paper reports an analytical study of delamination fracture in the Mixed Mode Flexure (MMF) functionally graded beam with considering the material non-linearity. The mechanical behavior of MMF beam is modeled by using a non-linear stress-strain relation. It is assumed that the material is functionally graded along the beam height. Fracture behavior is analyzed by the J-integral approach. Non-linear analytical solution is derived of the J-integral for a delamination located arbitrary along the beam height. The J-integral solution derived is verified by analyzing the strain energy release rate with considering the non-linear material behavior. The effects of material gradient, crack location along the beam height and material non-linearity on the fracture are evaluated. It is found that the J-integral value decreases with increasing the upper crack arm thickness. Concerning the influence of material gradient on the non-linear fracture, the analysis reveals that the J-integral value decreases with increasing the ratio of modulus of elasticity in the lower and upper edge of the beam. It is found also that non-linear material behavior leads to increase of the J-integral value. The present study contributes for the understanding of fracture in functionally graded beams that exhibit material non-linearity.

• Steel and Composite Structures
• /
• v.23 no.3
• /
• pp.339-350
• /
• 2017

In this paper, various nonlocal higher-order shear deformation beam theories that consider the size dependent effects in Functionally Graded Material (FGM) beam are examined. The presented theories fulfill the zero traction boundary conditions on the top and bottom surface of the beam and a shear correction factor is not required. Hamilton's principle is used to derive equation of motion as well as related boundary condition. The Navier solution is applied to solve the simply supported boundary conditions and exact formulas are proposed for the bending and static buckling. A parametric study is also included to investigate the effect of gradient index, length scale parameter and length-to-thickness ratio (aspect ratio) on the bending and the static buckling characteristics of FG nanobeams.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.7-11
• /
• 1997

SiC/C functionally gradient material (FGMs) were formed on graphite substrates by hot-wall chemical vapor deposition (CVD) technique using the SiCl$_4$-C$_3$H8-H$_2$ chemistry. Thermochemical equilibrium calculations were carried out to investigate the deposition process. The effect of process variables on the deposition yield and the SiC/C ratio in deposited layers was studied in detail. Calculated results showed a reasonable agreement with the experiment in a qualitative sense. SiC/C FGMs with excellent mechanical and thermal properties could be successfully formed on graphite substrates by carefully controlling the compositions in the deposited layers.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.4
• /
• pp.234-242
• /
• 1996

The direct reaction method has been used for the fabrication of Al-Mg/$Al_2O_3$ functionally gradient materials. It was found that the reaction layer of the Al-Mg/$Al_2O_3$ powder compact at $900^{\circ}C$ under air atmosphere led to the formation of reaction layers with varying ceramic phase contents. As the results of experiments by using the TGA system, the characteristics and growth behavior of the reaction layers were affected by the reaction temperature, the gas flow rate, the Mg contents and the $Al_2O_3$ contents.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.5
• /
• pp.1679-1688
• /
• 1996

Laser flash technique was applied to measure thermal properties of FGM made by a CVD method. System stability and reproducibility of this measuring system were proved and calibrated with glassy carbon used as reference material. Specimens was prepared by cutting FGM diagonally. Measurements were performed for a wide range of temperatures up to 1500K. Relative heat capacity of the FGM specimen was scattered with in $\pm$13% at room temperature and at high temperature above 1200K, and $\pm$3% at medium temperature range. On the other hand, thermal diffusivity data showed excellent reproducibility and stability through the whole temperature range. In conclusion, the multi-target radiometer can be applied to measure the thermal properties of non homogeneous materials like FGM.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.05a
• /
• pp.124-124
• /
• 1994

• Structural Engineering and Mechanics
• /
• v.67 no.2
• /
• pp.175-183
• /
• 2018

This research deals with the wave dispersion analysis of functionally graded double-layered nanobeam systems (FG-DNBSs) considering the piezoelectric effect based on nonlocal strain gradient theory. The nanobeam is modeled via Euler-Bernoulli beam theory. Material properties are considered to change gradually along the nanobeams' thickness on the basis of the rule of mixture. By implementing a Hamiltonian approach, the Euler-Lagrange equations of piezoelectric FG-DNBSs are obtained. Furthermore, applying an analytical solution, the dispersion relations of smart FG-DNBSs are derived by solving an eigenvalue problem. The effects of various parameters such as nonlocality, length scale parameter, interlayer stiffness, applied electric voltage, relative motions and gradient index on the wave dispersion characteristics of nanoscale beam have been investigated. Also, validity of reported results is proven in the framework of a diagram showing the convergence of this model's curve with that of a previous published attempt.

• Structural Engineering and Mechanics
• /
• v.81 no.4
• /
• pp.461-479
• /
• 2022

A finite element method analysis framework is introduced for the free vibration analyses of functionally graded porous beam structures by employing two variables trigonometric shear deformation theory. Both Young's modulus and material density of the FGP beam element are simultaneously considered as grading through the thickness of the beam. The finite element approach is developed using a nonlocal strain gradient theory. The governing equations derived here are solved introducing a 3-nodes beam element. A comprehensive parametric study is carried out, with a particular focus on the effects of various structural parameters such as the dispersion patterns of GPL reinforcements and porosity, thickness ratio, boundary conditions, nonlocal scale parameter and strain gradient parameters. The results indicate that porosity distribution and GPL pattern have significant effects on the response of the nanocomposite beams.

• Steel and Composite Structures
• /
• v.43 no.1
• /
• pp.31-54
• /
• 2022

This paper is concerned with the buckling behavior of functionally graded graphene reinforced porous nanocomposite beams based on the finite element method (FEM) using two variables trigonometric shear deformation theory. Both Young's modulus and material density of the FGP beam element are simultaneously considered as grading through the thickness of the beam. The finite element approach is developed using a nonlocal strain gradient theory. The governing equations derived here are solved introducing a 3-nodes beam element, and then the critical buckling load is calculated with different porosity distributions and GPL dispersion patterns. After a convergence and validation study to verify the accuracy of the present model, a comprehensive parametric study is carried out, with a particular focus on the effects of weight fraction, distribution pattern of GPL reinforcements on the Buckling behavior of the nanocomposite beam. The effects of various structural parameters such as the dispersion patterns for the graphene and porosity, thickness ratio, boundary conditions, and nonlocal and strain gradient parameters are brought out. The results indicate that porosity distribution and GPL pattern have significant effects on the response of the nanocomposite beams, and the results allows to identify the most effective way to achieve improved buckling behavior of the porous nanocomposite beam.