• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.8-11
• /
• 2001

In this study. the recovery of plasma induced damage in the etched PZT thin film with $O_2$ re-annealing have been investigated. The PZT thin films were etched as a function of $Cl_2/Ar$ and additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etch rates of PZT thin films were $1600\dot{A}/min$ at $Cl_{2}(80%)/Ar(20)%$ gas mixing ratio and $1970\dot{A}/min$ at 30 % additive $CF_4$ into $Cl_{2}(80%)/Ar(20)%$. The etched profile of PZT films was obtained above 70 by SEM. In order to recovery properties of PZT thin films after etching, the etched PZT thin films were re-annealed at various temperatures in $O_2$ atmosphere. From the hysteresis curves, ferroelectrical properties are improved by $O_2$ re-annealing process. The improvement of ferroelectric behavior at annealed sample is consistent with the increase of the (100) and (200) PZT phase revealed by x-ray diffraction (XRD). From XPS analysis, intensity of Pb-O, Zr-O and Ti-O peak are increased and the chemical residue peak is reduced by $O_2$ re-annealing. The ferroelectric behavior consistent with the dielectric nature of TixOy is recovered by $O_2$ recombination during rapid thermal annealing process. From AFM images, it shows that the surface roughness of re-annealed sample after etching is improved.

• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.1
• /
• pp.8-16
• /
• 1980

The cavity of triple filter was filled with the mixture of clinoptilolite and charcoal(1:1, V/V). The particle size of clinoptilolite was 30$\pm$5 A.S.T.M mesh. The reduction effects of the important gaseous components by this mixture were obtained as follows: 1) In comparison with the normal cellulose acetate niter, the contents of nicotine and T.P.M. were reduced about 35% and 22% respectively. 2) Many aliphatic and cyclic compounds were also substantially reduced in an average of 60%. 3) In contrast with the charcoal, the removal efficiency of clinoptilolite was revealed as higher (15-20%) in case of aliphatic compounds than the one (10-15%) of cyclic compounds. The above results showed us that the removal function of gaseous components was quite complementary each other (charcoal and clinoptilolite).

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1867-1870
• /
• 2005

The celestial navigation is one of alternatives to GPS system and can be used as a backup of GPS. In the celestial navigation system using more than two star trackers, the vehicle's ground position can be solved based on the star trackers' attitude information if the vehicle's local vertical or horizontal angle is given. In order to determine accurate ground position of flight vehicle, the high accurate local vertical angle measurement is one of the most important factors for navigation performance. In this paper, the Earth geophysical deflection was analyzed in the assumption of using the modern electrolyte tilt sensor as a local vertical sensor for celestial navigation system. According to the tilt sensor principle, the sensor measures the tilt angle from gravity direction which depends on the Earth geoid surface at a given position. In order to determine the local vertical angle from tilt sensor measurement, the relationship between the direction of gravity and the direction of the Earth center should be analyzed. Using a precision orbit determination software which includes the JGM-3 Earth geoid model, the direction of the Earth center and the direction of gravity are extracted and analyzed. Appling vector inner product and cross product to the both extracted vectors, the magnitude and phase of deflection angle between the direction of gravity and the direction of the Earth center are achieved successfully. And the result shows that the angle differences vary as a function of latitude and altitude. The maximum 0.094$^{circ}$angle difference occurs at 45$^{circ}$latitude in case of 1000 Km altitude condition.

• The Journal of Information Systems
• /
• v.13 no.1
• /
• pp.77-95
• /
• 2004

According to the increase of organizational complexity and the change of rapid information technology environment, many firms have shifted their information technology(IT) strategy from developing information systems in-house to purchasing application software such as Enterprise Resource Planning(ERP) Systems. Marketing and Sales functions within a Korean automotive part company include developing new assembly products, determining pricing, taking customer's orders, and shipping assembly products to customers. Marketing and Sales Information System(MSIS) in ERP system plays an important role in next Production Planning process. MSIS also makes management reporting and decision making faster and more uniform throughout an organization. MSIS promotes thinking about corporate goals, as opposed to thinking only about the goals of a single department or functional area. This paper intends to design and implement a MSIS in ERP systems for Korean automotive part company using object-oriented methodology In order to accomplish the implementation of MSIS in ERP system, we employed UML as its standard modeling language. In this study, four diagramming techniques such as use case diagram, sequence diagram, class diagram, component diagram among eight modeling techniques are used for analyzing hierarchical business process. In traditional marketing and sales function, a company with an unintegrated information system can have marketing and sales data that is data redundant or inaccurate. MSIS integrated in ERP system can solve the sales forecast problem, which minimizes the total costs of production, inventory, and transportation under constraints of production capacity. Also, the use of UML methodology makes S/W programmers shorten the phase of analysis and design in the implementation of MSIS system, and increase the reuse of software and the interoperability with corporate internal Information system.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.3
• /
• pp.245-250
• /
• 2006

The effects of aliphatic hydrocarbons (n-hexadecane and n-dodecane) on the volumetric oxygen mass transfer coefficient $(k_L\;a)$ were studied in flat alveolar airlift reactor and continuous stirred tank reactors (CSTRs). In the flat alveolar airlift reactor, high aeration rates (>2vvm) were required in order to obtain efficient organic-aqueous phase dispersion and reliable $k_La$ measurements. Addition of 1% (v/v) n-hexadecane or n-dodecane increased the $k_La$ 1.55- and 1.33-fold, respectively, compared to the control (superficial velocity: $25.8{\times}10^{-3}m/s$, sparger orifice diameter: 0.5 mm). Analysis of the gas-liquid interfacial area a and the liquid film mass transfer coefficient $k_L$ suggests that the observed $k_La$ increase was a function of the media's liquid film mass transfer. Addition of 1% (v/v) n-hexadecane or n-dodecane to analogous setups using CSTRs led to a $k_La$ increase by a factor of 1.68 and 1.36, respectively (superficial velocity: $2.1{\times}10^{-3}m/s$, stirring rate: 250 rpm). These results propose that low-concentration addition of oxygen-vectors to aerobic microbial cultures has additional benefit relative to incubation in purely aqueous media.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.361-374
• /
• 2020

This paper is concerned with the thermoelastic bending of FG beams resting on two-layer elastic foundations. One of these layers is Winkler springs with a variable modulus while the other is considered as a shear layer with a constant modulus. The beams are considered simply supported and subjected to thermo-mechanical loading. Temperature-dependent material properties are considered for the FG beams, which are assumed to be graded continuously across the panel thickness. The used theories contain undetermined integral terms which lead to a reduction of unknowns functions. Several micromechanical models are used to estimate the effective two-phase FG material properties as a function of the particles' volume fraction considering thermal effects. Analytical solutions for the thermo-mechanical bending analysis are obtained based on Navier's method that satisfies the boundary conditions. Finally, the numerical results are provided to reveal the effect of explicit micromechanical models, geometric parameters, temperature distribution and elastic foundation parameters on the thermoelastic response of FG beams.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.221-233
• /
• 2013

This study aims to explore how to cognize and perform case management process to community psychiatric rehabilitation center in Busan area. The case of case manager for 12 people obtained by conducting focus group interviews were in-depth analysis. Many commissioned by a variety of human service organizations in the contract and the client-centric intake has been received. Assessment, rather than a function of mental disabilities center service needs, planning difficulties in securing resource discovery and felt. Intervention phase focuses on direct service and when several agencies responsible for the case management approach. The possession of responsibility was unclear. Mainly monthly facilities within the checking step checks are being made, there was a desire for the realistic-supervision. Completion stage expectations showed a performance evaluation oriented, and individualized case management that can be represented well on the rating scale.

• The Journal of Society for e-Business Studies
• /
• v.8 no.2
• /
• pp.77-98
• /
• 2003

A web-based information system, that is a dominant type of information systems, suffers from the "web crisis" in development and maintenance of the system. To cope with the problem, a technology of software clustering to web-based application, which is one of web engineering, is strongly needed. In this paper, we propose a Form Clustering Algorithm along with an application example, which are used for internal-system reengineering to web-based information system. A Form Clustering Algorithm focuses on Page-model which is the feature of the web among the various web-based information system's structural model. Specially, we applying distance matrix to navigation model of graph form for easily analyzing, and web log analysis for identifying core function object that have a highly loading. Also, we create web software structure that can be used to maximize reusability and assign hardware effectively through 2-phase clustering step. Form Clustering Algorithm might be used at web-based information system development and maintenance for reusable web component development and hardware assignment, respectively.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.415-418
• /
• 2011

Tin (IV) dioxide ($SnO_2$) has attracted much attention due to its potential scientific significance and technological applications. $SnO_2$ nanoparticles were prepared under low temperature and pressure conditions via precipitation from a 0.1 M $SnCl_4{\cdot}5H_2O$ solution by slowly adding $NH_4OH$ while rapidly stirring the solution. $SnO_2$ nanoparticles were obtained from the reaction in the temperature range from 130 to $250^{\circ}C$ during 6 h. The microstructure and phase of the synthesized tin oxide particles were studied using XRD and TEM analyses. The average crystalline sizes of the synthesized $SnO_2$ particles were from 5 to 20 nm and they had a narrow distribution. The average crystalline size of the synthesized particles increased as the reaction temperature increased. The crystalline size of the synthesized tin oxide particles decreased with increases in the pH value. The X-ray analysis showed that the synthesized particles were crystalline, and the SAED patterns also indicate that the synthesized $SnO_2$ nanoparticles were crystalline. Furthermore, the morphology of the synthesized $SnO_2$ nanoparticles was as a function of the reaction temperature. The effects of the synthesis parameters, such as the pH condition and reaction temperature, are also discussed.

• Clinical and Experimental Pediatrics
• /
• v.50 no.10
• /
• pp.931-937
• /
• 2007

The hemolytic uremic syndrome (HUS) is a rare disease of microangiopathic hemolytic anemia, low platelet count and renal impairment. HUS usually occurs in young children after hemorrhagic colitis by shigatoxin-producing enterohemorrhagic E. coli (D+HUS). HUS is the most common cause of acute renal failure in infants and young children, and is a substantial cause of acute mortality and morbidity; however, renal function recovers in most of them. About 10% of children with HUS do not reveal preceding diarrheal illness, and is referred to as D- HUS or atypical HUS. Atypical HUS comprises a heterogeneous group of thrombomicroangiopathy (TMA) triggered by non-enteric infection, virus, drug, malignancies, transplantation, and other underlying medical condition. Emerging data indicate dysregulation of alternative complement pathway in atypical HUS, and genetic analyses have identified mutations of several regulatory genes; i.e. the fluid phase complement regulator Factor H (CFH), the integral membrane regulator membrane cofactor protein (MCP; CD46) and the serine protease Factor I (IF). The uncontrolled activation of the complement alternative pathway results in the excessive consumption of C3. Plasma exchange or plasma infusion is recommended for treatment of, and has dropped the mortality rate. However, overall prognosis is poor, and many patients succumb to end-stage renal disease. Clinical presentations, response to plasma therapy, and outcome after renal transplantation are influenced by the genotype of the complement regulators. Thrombotic thrombocytopenic purpura (TTP), another type of TMA, occurs mainly in adults as an acquired disease accompanied by fever, neurologic deficits and renal abnormalities. However, less frequent cases of congenital or hereditary TTP associated with ADAMTS-13 (a disintegrin and metalloprotease, with thrombospondin 1-like domains 13) gene mutations have been reported, also. Recent advances in molecular genetics better allow various HUS to be distinguished on the basis of their pathogenesis. The genetic analysis of HUS is important in defining the underlying etiology, predicting the genotype-related outcome and optimizing the management of the patients.