• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.20-26
• /
• 2006

This study investigated on the conversion of nitrogen component in ammonia gas to control fuel-NOx. Control conditions were found to suppress the production of NOx in the catalytic combustion of the gasified fuels. Also, the results would provide the basis of the theoretical study on fuel-NOx generation mechanism.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.500-503
• /
• 1991

Fuel cells power generating system converts the chemical energy of a fuel directly into electrical energy. The merits of fuel cells power generating system are pollution free and high energy conversion efficiency. Fuel cells power generating system includes the DC/AC converter. DC source obtained from stack is converted to the constant AC voltage or current by the inverter. In this paper, the power control techniques for the fuel cells power generating system are described.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.105-110
• /
• 1999

The elementary experiment was performed to develop the emulsified fuel production system using pressure injection nozzle in this study. The stabilities and characteristics of emulsified fuel which is produced through direct spray of water via pressure injection nozzle into oil are examined. To understand performance of emulsion production, stabilities of emulsified fuel which is made by adding water to the mixed fuel of Bunker-C and 10 $^{\sim}$ 50 vol% of heating oil were investigated. According to volume ratios of surfactant in heating oil the stability and SMDs were measured

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.4
• /
• pp.439-445
• /
• 2007

Proton exchange membrane Fuel Cells(PEMFCs) have been spotlighted because of their broad potential application for potable electrical devices, automobiles and residential usages. However, their utilization is limited to low temperature operation due to the electrolyte dehydration at high temperature. High temperature PEMFC operation offers high CO tolerance and easy water management. This review presents development of high temperature($120{\sim}200^{\circ}C$) PEMFC. Especially, PEMFC which is based on acid-doped PBI membrane is discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.7
• /
• pp.885-893
• /
• 2012

DME (Dimethyl ether) is regarded as one of the candidates of alternative fuels for diesel engine, because of its higher cetane number suitable for a compression ignition engine. Also, DME is a simple chemical structure, colorless gas that is easily liquefied and transported. On the other hand, Bunker oil (JIS C heavy oil) has long been used as a basic fuel in marine diesel engines and is the lowest grade fuel oil. In this study, the combustion and emission characteristics were measured experimentally in the direct injection type diesel engine operated with DME and Bunker oil mixed fuel. From our experimental results, it is induced that DME and Bunker oil blended fuel would be an effective fuel which can reduces the concentration of harmful matter in exhaust gases.

• Journal of ILASS-Korea
• /
• v.9 no.3
• /
• pp.1-7
• /
• 2004

This experiment was undertaken to investigate the atomization characteristics of the low viscosity biodiesel blended fuel and ultrasonic energy added one. Test fuels were conventional diesel fuel and biodiesel fuel. We compared to the characteristics of viscosity and surface tension, SMD between low viscosity biodiesel blended fuel and ultrasonic energy added one. Sauter mean diameter was measured under the variation of the spray distance. Viscosity and surface tension was measured under the variation of the time trace. To measure the droplet size, we used the Malvern system 2600C. Droplet size distribution was analyzed from the result data of Malvern system. Through this experiment, we found that the condition of the ultrasonic energy added situation had smaller Sauter mean diameter of droplet, viscosity and surface tension than that of the conventional situation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.137-141
• /
• 2007

The startup behaviour of PEM fuel cells at subfreeze zero is one of the most challenging tasks to be solved before PEM fuel cell vehicle is commercialized. Automotive companies are trying to increase cold statup capability of fuel cell. In this study, we found out the design factor of the stack to increase cold startup capability using 4kW stack and then cold startup test was performed at the various shutdown condition and the various current. In order to test the cold startup possibility and capability in vehicle, we installed 80kW stack in the vehicle and this 80kW fuel cell vehicle was housed in an environmental chamber to investigate the characteristics of cold startup and driving. We found that it is possible for fuel cell vehicle with 80kW stack to self-heated cold startup and drive at $-15^{\circ}C$.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.197-199
• /
• 2006

The Proton Exchange Membrane Fuel Cells (PEMFCs) are being used in a variety of applications including portable power generation, transportation and back-up power systems. In this paper presents a novel circuit model for a PEMFC that can be used to design and analyze fuel-cell power system. The Pspice-based model uses BJTs, L and C elements available in the Pspice library with some modification. The model includes the phenomena like activation polarization, ohmic polarization and mass transport effect present in a PEM fuel cell. Simulated characteristics of the fuel cell were compared with the experimental results obtained on a commercial fuel cell.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.46-54
• /
• 1993

In order to develop a fuel-efficient gasoline engine oil, an experimental study was conducted using an engine dynamometer, a passenger car and the SRV machine. Oil samples with different viscosity were prepared by adding several friction modifiers to select the best one and also to investigate the effect of the viscosity grade. From the study, we have developed engine oils which result in good fuel economy. The viscosity grade of 7.5W/30 was best among the oils investigated with respect to fuel economy and a fatty amine type friction modifier had the good fuel-economy property.

• Structural Engineering and Mechanics
• /
• v.16 no.4
• /
• pp.423-440
• /
• 2003

Arbitrary Lagrangian Eulerian finite element methods gain interest for the capability to control mesh geometry independently from material geometry, the ALE methods are used to create a new undistorted mesh for the fluid domain. In this paper we use the ALE technique to solve fuel slosh problem. Fuel slosh is an important design consideration not only for the fuel tank, but also for the structure supporting the fuel tank. "Fuel slosh" can be generated by many ways: abrupt changes in acceleration (braking), as well as abrupt changes in direction (highway exit-ramp). Repetitive motion can also be involved if a "sloshing resonance" is generated. These sloshing events can in turn affect the overall performance of the parent structure. A finite element analysis method has been developed to analyze this complex event. A new ALE formulation for the fluid mesh has been developed to keep the fluid mesh integrity during the motion of the tank. This paper explains the analysis capabilities on a technical level. Following the explanation, the analysis capabilities are validated against theoretical using potential flow for calculating fuel slosh frequency.