• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.210-214
• /
• 2005

To reduce effectively cadmium (Cd) phytoavailability by phosphate in mine tailing affected soil, fused and super phosphate (FSP), a main phosphate fertilizer in South Korea, was selected as phosphate source and then applied at the rates of 0, 78, 390, and 780 $P_2O_5kg\;ha^{-1}$. FSP did not decrease Cd extractability and radish Cd uptake, but increased significantly. The effect of Cd supplement and soil negativity increase through FSP application was not significant. Soil pH decreased markedly with increasing FSP application, which increased significantly soil Cd extractability and radish Cd uptake. As a result, phosphate fertilizer for reducing Cd phtyoavailability in heavy metals contaminated soil should be carefully selected as alkaline type.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.4
• /
• pp.11-17
• /
• 1980

This paper describes realization of digital filter using $\mu$p controler and discusses measured characteristics of this filter, The idea of P. L. implementation[1] is used in realization, and in this system we utilize a DMA and arithmatic control program of $\mu$p. In this way, we can get more flexible capability than the basic PL method, and higher speed than a filter using general purpose $\mu$p in hardware, Furthermore, we get a 15 KHz sampling frequency(fs) as speed limit in real time processing, and know that this limitation is restricted by execution time (58$\mu$ sec) of DMA control statement. As for filter charateristics, maximum stop band frequencies (fsp) are 1665 Hz, 1445 Hz in Butterworth and Tchebichef approximation, respectively, when fs = 14 KHz. Measured errors between the design specification and the actual result are 0.2dB, 0.1 dB in pass band (when cufoff frequency is 500Hz),-1.1dB (when fsp is 1000Hz), 0.4dB(when fsp is 750 Hz) in stop band frequency of Butterworth and Tchebichef, respectively.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.242-246
• /
• 2004

Nano-sized a-alumina with a narrow distribution was prepared by using Flame Spray Pyrolysis (FSP). The microemulsion of water in oil (W/O) was prepared to make ultrafine droplets for FSP process. Kerosene (fuel) as a continuos phase and Al(NO$_3$)$_3$$.$9$H_2O$ (oxidizer) aqueous solution as a dispersed phase were prepared for microemulsification. The microemulsion with dispersion stability was obtained by adjusting the composition of 80 vol% kerosene, 10 vol% aqueous solution, and 10 vol% emulsifying agent. Microemulsion was sprayed onto the flame by using two-fluid nozzle spray gun under the condition of 0.03 ㎫ air pressure. The synthesized products were $\alpha$-alumina phase with the size of 20 to 30 nm.

• Development and Reproduction
• /
• v.23 no.2
• /
• pp.193-198
• /
• 2019

Genomic DNA samples were obtained from cultured penaeid shrimp (Penaeus chinensis) individuals such as fresh shrimp population (FSP) and deceased shrimp population (DSP) from Shinan regions in the Korean peninsula. In this study, 233 loci were identified in the FSP shrimp population and 162 in the DSP shrimp population: 33 specific loci (14.2%) in the FSP shrimp population and 42 (25.9%) in the DSP population. A total of 66 (an average of 9.4 per primer) were observed in DSP shrimp population, whereas 55 unique loci to each population (an average of 7.9 per primer) in the FSP shrimp population. The Hierarchical dendrogram extended by the seven oligonucleotides primers indicates three genetic clusters: cluster 1 (FRESH 01, 02, and DECEASED 12, 13, 15, 16, 17, 19, 20, 22) and cluster 2 (FRESH 03, 04, 05, 06, 07, 08, 09, 10, 11, and DECEASED 14, 18, 21). Among the twenty-two shrimp, the shortest genetic distance that exposed significant molecular differences was between individuals 20 and 16 from the DSP shrimp population (genetic distance=0.071), while the longest genetic distance among the twenty-two individuals that established significant molecular differences was between individuals FRESH no. 02 and FRESH no. 04 (genetic distance=0.477). In due course, PCR analysis has revealed the significant genetic distance among two penaeid shrimp populations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.12
• /
• pp.1699-1705
• /
• 2011

Magnesium ammonium phosphate (MAP) was recovered from swine wastewater and the feasibility of reutilizing it as a slowly-releasing fertilizer was evaluated. Maize growth was investigated with normal and high application rates of MAP and a fused super phosphate (FSP) fertilizer. A total of 5 treatments ($T_0$ = control, $T_1$ = MAP based on 30 kg P $ha^{-1}$, $T_2$ = FSP based on 30 kg P $ha^{-1}$+urea equivalent to nitrogen of MAP applied in $T_1$, $T_3$ = MAP based on 40 kg P $ha^{-1}$, $T_4$ = FSP based on 40 kg P $ha^{-1}$+urea equivalent to nitrogen of MAP applied in $T_3$) were arranged with 3 replications. In the case of height and circumference, significant differences were found between controls and treated maize plants (p<0.01). However, no statistical differences were found between MAP- and FSP-urea treated maize. Leaf area and green biomass yield were significantly (p<0.01) higher in the treated group than control. Leaf area was also found significantly higher (p<0.01) in the higher MAP- treated group (2,374 $cm^2$ $plant^{-1}$) than other treatments. $N_2O$ emission was found to be lower in MAP treated soil than that from FSP-urea treated soil, which might be due to the slow releasing pattern of MAP. It could be assumed from the results that MAP would be an eco-friendly sustainable fertilizer source for crop production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.639-643
• /
• 2003

The data on 283 Sahiwal cows, sired by 16 bulls, maintained at Cattle Breeding Farm of Nagpur Veterinary College and Dairy Farm of Agricultural College, Nagpur, were considered for the estimation of genetic parameters. Variance and covariance estimates of first lactation traits were obtained using restricted maximum likelihood technique (REML). When first lactation milk yield (FLMY), first lactation length (FLL) and average daily yield (ADY) traits were considered for REML analysis, the heritabilities were $0.184{\pm}0.146$, $0.132{\pm}0.131$ and $0.141{\pm}0.133$, respectively. While, genetic and phenotypic correlations between them were medium to high except phenotypic correlations between FLL and ADY (-0.025). REML procedure considering FLMY, age at first calving (AFC) and first service period (FSP) combination exhibits heritabilities as $0.274{\pm}0.173$, $0.506{\pm}0.233$ and $0.274{\pm}0.172$, respectively. Genetic correlations were $-0.120{\pm}0.376$, $0.225{\pm}0.423$ and $0.365{\pm}0.331$ between FLMY and AFC, FLMY and FSP, AFC and FSP, respectively. Phenotypic correlations were 0.057, 0.289 and 0.123, respectively. Considering all five traits REML combination heritabilities estimated were $0.238{\pm}0.162$, $0.160{\pm}0.139$, $0.136{\pm}0.132$, $0.409{\pm}0.209$ and $0.259{\pm}0.168$ for FLMY, FLL, ADY, AFC and FSP, respectively. The genetic correlations were positive except FLMY and AFC. The phenotypic correlations were also positive except FLL and ADY, ADY and FSP. Almost all estimates were associated with high standard error.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.6
• /
• pp.613-622
• /
• 2018

This study investigated changes in the quality and antioxidant activity of soy sauce with added Saccharina japonica powder (FSP). Soy sauce was prepared with acid-hydrolyzed soy sauce, brewed soy sauce, honey, ginger, garlic, dried red pepper, ${\gamma}$-aminobutyric acid (GABA)-enriched sea tangle fermented in lactic acid, and 1% or 3% S. japonica powder by soy sauce volume. The color, pH, microbiology, amino nitrogen, free amino acids, antioxidant activity, and sensory qualities of the soy sauce were evaluated. There were no significant differences in the general characteristics or antioxidant activity. However, the addition of FSP to the soy sauce enhanced the delicate flavor. Furthermore, soy sauce containing FSP had higher levels of GABA (50 mg/100 mL), a biofunctional ingredient. Therefore, the development of seasoning soy sauce with enhanced functionality seems possible.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.2
• /
• pp.131-138
• /
• 2000

This experiment was carried out during the period from September, 1997 to October, 1998 to determine the effect of fermented saw-dust pig manure (FSP) application on the herbage production on a mixed pasture in the Cheju brown volcanic ash soil. Split plot design (main plot: 3 nitrogen application levels of 0, 150 and 300 kgiha; sub plot: 4 pig sawdust manure levels of 0, 3, 6 and 12 tonha) was used. Plant height and dry matter yield increased significantly with an increase of nitrogen and FSP level. There was no difference in the botanical composition of grasses as affected by FSP application level, but herbage yields of grass species were increased by nitrogen application compared to that without nitrogen application. Botanical composition of white clover decreased with an increase of nitrogen application, but increased with an increase of FSP application level. Percentages of weeds were not affected by application rates of chemical nitrogen fertilizer and swine manure in the mixed species pasture. Nitrogen, phosphorus, and potassium contents of species in the pasture significantly increased with increasing application rates of nitrogen fertilizer. In conclusion, it would be an optimum to apply 150 kgha of inorganic chemical fertilizer and plus either 3 or 6 toniha of fermented swine manure with sawdust for optimum production of mixed pasture on Cheju Island. (Key words : Herbage production, Botanical composition, Morphology, Plant mineral contents)

• Journal of Welding and Joining
• /
• v.31 no.2
• /
• pp.26-29
• /
• 2013

The latest research & development trend on friction stir welding and friction stir processing technologies presented in the international symposium, 'Friction Stir Welding & Processing VII'. Papers and presentations about high temperature materials such as advanced high strength steel, stainless steel and titanum alloy shoot up this year. Papers on modeling of metal flow and control of process parameters also increased. The FSP technologies for manufacturing of carbon materials reinforced metal matrix composites were reported, too.

• Computers and Concrete
• /
• v.7 no.2
• /
• pp.103-118
• /
• 2010

Penetration of a fragment-like projectile into Fiber Reinforced Concrete (FRC) was simulated using finite element (FE) and particle formulations. Extreme deformations and failure of the material during the penetration event were modeled with multiple approaches to evaluate how well each represented the actual physics of the penetration process and compared to experimental data. A Fragment Simulating Projectile(FSP) normally impacting a flat, square plate of FRC was modeled using two target thicknesses to examine the different levels of damage. The thinner plate was perforated by the FSP, while the thicker plate captured the FSP and only allowed penetration part way through the thickness. Full three dimensional simulations were performed, so the capability was present for non-symmetric FRC behavior and possible projectile rotation in all directions. These calculations assessed the ability of the finite element and particle formulations to calculate penetration response while assessing criteria necessary to perform the computations. The numerical code EPIC contains the element and particle formulations, as well as the explicit methodology and constitutive models, needed to perform these simulations.