• 대한전자공학회논문지TC
• /
• 제39권2호
• /
• pp.108-116
• /
• 2002

본 논문은 프로브 피드와 이중 패치 구조를 이용한 마이크로스트립 안테나 대역폭 개선에 관한 것이다. PCS와 IMT-2000 서비스를 동시에 제공하기 위한 안테나는 임피던스 대역폭이 22%가 되어야 한다. 본 논문에서는 구조가 복잡하지 않는 광대역 마이크로스트립 패치 안테나에 대해 제안한다. 마이크로스트립 패치 안테나의 특성 해석은 상업용 소프트웨어인 앙상블을 이용하였다. 마이크로스트립 패치 안테나의 설계, 제작 및 보정한 결과 값은 VSWR 2에서 임피던스 대역폭이 500 ㎒(25.5%), VSWR 1.5에서 임피던스 대역폭이 430 ㎒(21.9%)의 결과를 얻었다. 안테나의 복사패턴에서 부엽(side lobe)은 -14 dB를 가졌고, 전후방비(front to back ratio)는 전체적으로 20 dB를 얻었다. 안테나의 측정 이득은 5.2 dBi이다.

• 복식문화연구
• /
• 제20권3호
• /
• pp.403-415
• /
• 2012

This study did a comparative analysis on the patterns of several male bodice slopers, followed by evaluating the appearance through a virtual garment simulation, which used a three-dimensional virtual garment system. Through this process, this study attempted to comparatively analyze the suitability of the garment or each sloper according to body parts. The analysis of the drawing formulas of bodices slopers had the following results. With a standard chest size, all six slopers had a 1:4 ratio for a front and back chest size; 1:5 or 1:6 for a front and back breast size 1:5 or 1:4 for a neck base circumference; and 1:20 or 1:12 for the chest size. When comparing the anthropometric figures and the actual measurements of each body part for the bodice slopers, the actual measurements secured extra amounts in the drawing process. The evaluation results for appearance of the six men's bodice slopers showed that the slopers used by companies (E and F) had top scores followed by the slopers made for (C and D), while the sloper for education (A) received the lowest scores. Regarding the results of the variance analysis verifying the significant difference between the slopers, twenty-five items had significant differences with the exception of four items on the front side and one item on the backside.

• 한국실내디자인학회논문집
• /
• 제15권5호
• /
• pp.120-129
• /
• 2006

Apartments have become the most popular type of residential building in Korea since the 1960s. The dwelling space should be designed to accomodate various life styles or changing needs of family members. This research is conducted to analyze flexible interior space types of apartments and to improve the architectural planning and design of apartments that can satisfy various needs of residents. In this study, apartments of 10 - 90 pyeongs built in the region of Seoul, between 1998 and 2007, are investigated in terms of the unit plan, the number of open sides, and a distribution of flexible apartment types for each year, Apartments with flexible space are classified into 10 different types, including a flexible type between bedrooms, a flexible type between a bedroom and the livingroom, and a flexible type between the dinning room and the livingroom. According to the composition of unit plans, apartments are also differentiated as a single-corridor type, a double-corridor type, a stairway type, a hall type, and a combination type. According to these classifications, the characteristics of desirable unit plans were analyzed. The results of the analysis showed that, as the unit size of apartments get bigger, the ratio of width/depth of the front side unit plan is increased. This result reflects a trend of high-rise apartments which have an increased number of front-side bays and a shorter depth for better penetration of daylight. In addition, a hall type is found to have a wider front side and shorter depth. According to open sides, a flexible type of the livingroom and the dinning room/kitchen (L-D.K) is found to be most common for the front/back open space, and the livingroom is usually placed on the front/side open space. To meet the changing needs of residents, more research should be conducted on flexible dwelling space.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.197-205
• /
• 2000

매우 높은 선형성을 요구하는 혼합기의 설계는 입력 전력의 back-off로 얻어지는 것이 일반적이다. 본 논문에 서는 혼합기의 비선형 특성을 보상하기 위해 혼합기의 입력 단에 역 비선형 특성을 갖는 전치왜곡 회로를 부착 하여 비선형 특성을 개선시키는 방볍을 제안하였다. 이 제안된 방법으로 주파수 성분이 1852.5 MHz와 1857.5 MHz인 2 2 -tone 엽력 RF 선호와 2015 MHz인 LO 선호를 혼합기에 입력하여 혼합기의 ell비를 IF 출력이 -20dBm/tone 일 때 22 dB. - 17 dBm/tone일 때 21.7 dB를 개선시켰다.

• Journal of information and communication convergence engineering
• /
• 제16권4호
• /
• pp.203-212
• /
• 2018

In this article, a novel design of patch antenna with wide band characteristics is presented. The proposed antenna is having electrical dimensions of $0.14{\lambda}{\times}0.11{\lambda}$ (at lower initial frequency) and footprints of $150mm^2$. Structural parameters optimization shows 3.1-23.5 GHz frequency range for a (reflection coefficient) $S_{11}{\leq}-10dB$ and simulated gain 6.8 dB is obtained. An equivalent circuit model is proposed to get an insight view of antenna. Advanced Systems Design (ADS) simulation results are obtain which confirm the validity of proposed model. Degenerated foster canonical form has been used to explain the reactance and capacitive behavior idea of simulated proposed antenna's input impedance later on an equivalent circuit model and smith chart is also suggested. HFSS and CST have been used to analyze antenna behavior. The proposed antenna can be further used for microwave image detection applications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.387-392
• /
• 2003

This study is put a focus on the identification of sound characteristics according to the interior configuration of sound absorption material and air gap. Noise barrier is general consists of front perforated panel, air layer, sound absorption material, air gap and back plate. Noise barrier is required to the NRC value of 0.7. The absorbing performance of the noise barrier relies on the opening ratio of the perforated panel and the efficiency of the absorbing material. This study has observed the effect of opening ratio and hole size, the increase of sound absorbing performance by the configurations of sound absorption material and air gap. New designed noise barrier is achieved the acoustical performance of 0.87 the measurement in a reveration room.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.934-942
• /
• 2011

This study was intended to analyze conventional grading increments and methods for middle-age men's pants, and to suggest new grading guidelines that will enable to improve satisfaction with size and silhouette as a result of combining the concept of grading, which help maintain the ratio and proportion by sizes as one of ready-made apparel's advantages, with body form oriented and aesthetic approaches. In the apparel industry, the current sizing specifications and methods adopted by relevant companies, as well as the characteristics of body forms of men aged 35 to 55 years were comparatively analyzed to find out problems and ultimately to suggest their solutions or improvements. It was considered that as the conventional grading practices used in the industry were customary on the basis of the past experiences, it was required to take the body forms of target consumers into account and also, to reconsider the conventional grading methods. Analyses of sizing and specifications by brands show that 4 to 19 sizes including 82 or 84 as standard size have been produced. Since men's apparel has a large number of sizes with the large range of sizes, grading is critically important. As silhouettes depend on the distribution of grading rule values at each point of increment pattern in the main regions during grading, it is necessary to consider both size grading and form variations. To maintain an appropriate silhouette with keeping the angle of center back line of a pattern, it is desirable to set the ratio of side line part to center part from the crease line to approximately 3:7. It is required to diversify the values of grading rules according to different sizes and pattern regions in consideration for the body forms of key consumers. In addition, if the natural lines of designs and patterns for the width increments of waist circumference and hip circumference, the increments of hip width in pant's front and back panels, the ratio of grading rule values of the right and left sides of crease line, knee circumference, thigh circumference and so on are taken into account, grading will be satisfactory in the all aspects of size, silhouette and ratio.

• 한국음향학회지
• /
• 제10권5호
• /
• pp.69-76
• /
• 1991

본 논문에서는 통계적 방법에 의한 음소의 자동분할에 관한 알고리즘을 제안하였다. 우선 음성 신호를 AR 모델로 모델링한 후 스펙트럼이 변화하기 전과 변화한 후의 모델에 대해서 likelihood ratio 와 mutual information을 고려한 test statistics 로부터 모델 계수가 변화하는 곳을 예측해 내고 이 곳을 음소의 경계로 판단한다. 이 경우 검파되지 못하는 대부분의 음소는 짧은 자음이었으며 Signed front-to-back maximum area ratio을 이용하여 개선하였다. 또한 false alarm error을 줄이기 위해 두 segment 사이의 distortion 으로부터 smoothing을 하였다. 3명의 화자에 대한 실험 결과 non-detection error는 10%, false alarm error는 20% 정도로 나타났지만 화자간에 알고리즘의 성능 변화가 거의 없으 며 특히 분할된 경계치 분포는 전체 음소의 90% 이상이 이 30ms 이내에 위치하였다.

• 센서학회지
• /
• 제31권2호
• /
• pp.115-119
• /
• 2022

A readout circuit for a mercury-cadmium-telluride (MCT)-amplified mid-wave infrared (IR) photodetector was realized and applied to noncontact chemical agent detectors based on a quantum cascade laser (QCL). The QCL emitted 250 times for each wavelength in 0.2-㎛ steps from 8 to 12 ㎛ with a frequency of 100 kHz and duty ratio of 10%. Because of the nonconstant QCL emission power during on-duty, averaging the photodetector signals is essential. Averaging can be performed in digital back-end processing through a high-speed analog-to-digital converter (ADC) or in analog front-end processing through an integrator circuit. In addition, it should be considered that the 250 IR data points should be completely transferred to a PC during each wavelength tuning period of the QCL. To average and minimize the IR data, we designed a readout circuit using the analog front-end processing method. The proposed readout circuit consisted of a switched-capacitor integrator, voltage level shifter, relatively low-speed analog-to-digital converter, and micro-control unit. We confirmed that the MCT photodetector signal according to the QCL source can be accurately read and transferred to the PC without omissions.

• 한국지반공학회논문집
• /
• 제32권1호
• /
• pp.5-18
• /
• 2016

본 연구에서는 모형실험을 통해 균질모래지반에 매설된 횡력을 받는 무리말뚝의 수평저항력을 산정하는데 가장 큰 영향을 주는 배면토의 저항형태를 파악하였다. 저항거동 형태는 회전절점, 쐐기 파괴각, 쐐기 날개각으로 파악하였다. 실험은 지반의 상대밀도, 말뚝의 폭, 말뚝의 간격과 배열을 달리하여 수행하였다. 그 결과 직렬말뚝에서의 지반거동 양상은 전열과 중간열이 같았고 후열의 경우 전열과 중간열 보다 작은 값을 나타내었다. 병렬말뚝의 경우 지반거동 양상이 단독말뚝과 같게 나타났다. 실험 결과를 바탕으로 회전절점, 쐐기 파괴각, 쐐기 날개각 산정 값 들을 식으로 제안하였다.