• 제목/요약/키워드: Fringe area

검색결과 101건 처리시간 0.029초

Maxillary Posterior Crossbite Appliance의 적용시 응력 분포에 관한 광탄성법적 연구 (Photoelastic evaluation of Maxillary Posterior Crossbite Appliance)

  • 장성호;윤영주;김광원
    • 대한치과교정학회지
    • /
    • 제31권6호
    • /
    • pp.549-558
    • /
    • 2001
  • 본 연구는 협측 이소맹출된 상악 제2대구치의 협측 반대교합을 개선하기 위해 사용되는 maxillary posterior crossbite appliance에 의해 상악 제2대구치의 치근단과 그 주위의 치조골에 발생되는 응력분포를 알아보기 위해 광탄성법을 이용하여 분석하였다. 상악의 치조골을 재현하기 위해 PL-3형의 epoxy resin과 PL-3보다 경질인 레진치아를 사용하여 협측 이소맹출된 상악 제2대구치를 광탄성모형으로 재현하였다. 광탄성 모형상에 maxillary posterior crossbite appliance를 적용하고 힘을 가하기 전과후의 응력분포를 알아보기 위해 원형편광기를 사용하여 모형의 전후방에서 관찰하였다. 이상의 연구를 통해 얻어진 결과는 다음과 같다. 1. 상악 제2대구치의 구개면에 힘을 가한 경우, 협측과 구개측 치근첨에는 무늬차수 0.6차와 치경부에는 무늬차수 0.9차의 응력이 집중이 되어 나타났고 회전중심이 구개측 치근은 치근첨에, 협측 치근은 치근 1/4부위에 발생하였으며 이로 인해 제2대구치에 구개측으로의 비조절성 경사이동 및 회전력이 발생하였다. 2. 상악 제2대구치의 협측면에 힘을 가한 경우에는 구개면에 힘을 가한 경우 보다 협측과 구개측의 치근첨에 더 많은 무늬차수 2.2차의 응력이 발생하였다. 또한 치근하방의 치조골 부위에 응력의 발생과 함께 구개측 치근의 회전중심은 사라지고 협측 치근은 치근첨으로 이동하여 이로 인해 구개측으로의 조절성 경사이동 및 함입력이 발생하였다. 3. 상악 제2대구치의 협측이나 설측에 힘을 가한 경우, 고정원인 제1대구치는 치근첨부위에 소량의 응력이 발생하였고, 편측의 제2대구치에만 힘을 가한 경우보다 양측의 제2대구치에 동시에 힘을 가한 경우에서 더 많은 양의 응력이 제1대구치에 발생하였다. 이상의 결과는 협측 이소맹출된 상악 제2대구치의 구치부 협측 반대교합을 개선하기 위해 사용되는 maxillary posterior crossbite appliance를 적용할 때, 제1대구치의 고정원 상실을 최소화하기 위해서는 편측의 제2대구치를 먼저 개선시키고 그 후 반대측 제2대구치의 개선을 도모하는 것이 바람직하다는 것을 의미한다. 또한 구개측면보다는 협측면에서 견인력을 가하여 제2대구치에 함입력과 구개측으로의 조절성 경사이동을 발생시키는 것이 구치의 정출 및 회전에 의해 야기될 수 있는 교합장애를 방지할 수 있으리라 사료된다.

  • PDF

GIS기법을 이용한 근린주구 보행환경평가 -창원시를 사례지역으로- (An Evaluation of the Neighborhood Walking Environment Using GIS Method -Focusing on the Case Study of Changwon City-)

  • 박경훈;이우성;변지혜
    • 한국지리정보학회지
    • /
    • 제13권4호
    • /
    • pp.78-90
    • /
    • 2010
  • 본 연구는 창원시를 대상으로 일상생활 속에서 걷기와 자전거 타기를 활성화하기 위한 보행환경 평가지표와 Mobile GIS를 활용한 현장에서의 보행환경 DB 구축방법론을 제시하고자 하였다. 이를 위해 국내 외 문헌연구를 통하여 총 20개의 보행환경 평가항목을 선정한 후 항목별 평가점수 부여방식을 정립하였고, Mobile GIS 기법을 활용하여 각 조사항목의 DB를 효과적으로 구축하였다. 그 결과를 활용하여 종합적인 보행환경 평가를 실시한 결과는 다음과 같다. 전반적으로 창원광장을 중심으로 분포하고 있는 구역의 종합점수가 42점 이상으로 다른 구역에 비해 양호한 보행환경을 가지는 것으로 평가되었으나, 단독 및 연립주택 중심의 주거지역에서는 보행환경이 상대적으로 매우 불량한 것으로 평가되었다. 본 연구결과는 보행환경의 개선이 필요한 지역과 주요 목적지인 공원, 쇼핑시설, 학교 등에 접근할 수 있는 구간을 전략적으로 설정하는데 유용하게 활용될 수 있을 것으로 판단된다. 또한 보행환경개선 지역 또는 구간이 결정되면, 현장조사 결과 및 지역주민의 보행환경 인식조사결과와 비교 분석하여 집중적으로 개선해야 할 보행환경 요소를 추출하는 것이 가능할 것이며, 일상생활 속에서 시민들의 신체 활동을 증진시키기 위한 보행환경계획 및 설계, 그리고 유지 관리를 수행하는데 있어 유용한 의사결정지원수단으로 활용 가능할 것이다.

노인장기요양보험제도에서 요양보호사의 근로조건이 서비스 질에 미치는 효과에 관한 연구 (The Working Conditions for Care Workers and Care Quality in Long-Term Care Services)

  • 권현정;홍경준
    • 한국사회복지학
    • /
    • 제69권1호
    • /
    • pp.33-57
    • /
    • 2017
  • 본 연구는 한국의 장기요양서비스 제도적 맥락 속에서 발생한 시장화와 공존하고 있는 공공성의 관점에서 요양보호사의 근로조건이 서비스 질에 미치는 효과를 실증분석 하였다. 기존 연구들은 사회서비스의 낮은 생산성과 시장화로 가중된 저임금노동시장의 문제가 서비스 질 저하를 가져온다고 추론한 것이지, 근로조건과 서비스 질의 두 변수간의 인과관계를 규명한 것이 아니다. 본 연구의 노인장기요양서비스 제도적 맥락에서 본 요양보호사의 근로조건과 서비스 질과의 이론적 관련성은 Daly와 Lewis(2000)의 돌봄의 통합적 접근을 통해 조망하였다. 자료는 전국에 있는 노인장기요양시설을 소유권을 중심으로 비비례층화표집하여 248개 조직에 대한 설문조사를 통해 수집하였고, 이를 다시 인터넷 자료와 병합하였다. 분석결과, 요양보호사의 근로조건 가운데 3개 영역에서 임금수준이 높을수록, 부가급여가 존재할수록, 교육 및 훈련을 지원할수록 서비스 질이 높은 것으로 나타났다. 이는 정부가 규제하는 노동시장정책과 평가제도상의 최소기준을 넘어서는 조직의 규범적 차원에서의 근로조건과 보상체계가 장기요양서비스 질에 긍정적인 영향을 미치고 있다는 것을 보여준다.

  • PDF

연결고정, 인접면 접촉강도 및 치관길이에 따른 엔도포어 임플란트를 이용한 고정성 국소의치의 광탄성 응력 분석 (A PHOTOELASTIC STRESS ANALYSIS OF FIXED PARTIAL DENTURES WITH ENDOPOREIMPLANTS ACCORDING TO SPLINTING, CONTACT TIGHTNESS, AND CROWN LENGTH)

  • 정회열;최민호;김유리;조혜원
    • 대한치과보철학회지
    • /
    • 제42권4호
    • /
    • pp.425-442
    • /
    • 2004
  • Statement of problem: A difficulty in achieving a passive-fitting prosthesis can be overcome by individual crown restoation of multiple implants. But individualized crown has another difficulty in control of contact tightness and stress distribution. Purpose: This in vitro study is to evaluate the stress distribution and the magnitude in the supporting tissues around Endopore implants with different crown lengths, interproximal contact tightness, and the splinting effects. Material & methods: Three Endopore implants($4.1{\times}9mm$) were placed in the mandibular posterior edentulous area distal to the canine and photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA). Restorations were fabricated in two crown lengths: 9, 13 mm. For non-splinted restorations, individual crowns were fabricated on three custom-milled titanium abutments. After the units were cemented, 4 levels of interproximal contact tightness were evaluated: open, ideal($8{\mu}m$ shim stock drags without tearing), medium($40{\mu}m$), and heavy($80{\mu}m$). For splinted restorations, 3-unit fixed partial dentures were fabricated. This study was examined under simulated non-loaded and loaded conditions(6.8 kg). Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure. Results: 1. When restorations were not splinted, the more interproximal contact tightness was increased among the three implants, the more stress was shown in the cervical region of each implant. When crown length was increased, stresses tended to increase in the apex of implants but there were little differences in stress fringes. 2. When nonsplinted restorations were loaded on the first or third implant, stresses were increased in the apex and cervical region of loaded implant. Regardless of interproximal contact tightness level, stresses were not distributed among the three implants. But with tighter interproximal contact, stresses were increased in the cervical region of loaded first or third implant. 3. When the nonsplinted restorations were not loaded, there were little stresses on the supporting structure of implants, but low level stresses were shown in the splinted restorations even after sectioning and soldering. 4. With splinted restorations, there were little differences in stresses between different crown lengths. When splinted restorations were loaded, stresses were increased slightly on the loaded implant, but relatively even stress distribution occurred among the three implants. Conclusions: Splinting the crowns of adjacent implants is recommended for Endopore implants under the overloading situation.

소아천식 유병율 분포의 분석변수로서 불투수면 : 시공간적 접근 (Impervious Surface as a Thematic Parameter of Analysis for Childhood Asthma Hospitalizations : Spatio-temporal Approaches)

  • 엄정섭
    • 한국지역지리학회지
    • /
    • 제16권6호
    • /
    • pp.706-723
    • /
    • 2010
  • 불투수면은 물, 공기, 자연 생태계 등 전체 환경을 악화시키는 요인이 되기 때문에 도시의 총체적인 환경 질을 대표하는 지표로서 활용되고 있다. 도시를 대표하는 토지이용으로서 불투수면이 위성영상으로부터 추출되었으며 국민건강보험공단 데이터를 이용하여 소아천식의 유병률에 대한 GIS 데이터 베이스가 구축되었다. 불투수 환경에 거주하는 아동들이 26.58%의 천식 유병률을 보여주어 투수환경 거주 아동의15.82%에 비해 거의 2배에 가까운 천식환자가 확인되었다. 3년 동안 계속해서 천식을 치료하기 위해 병원을 방문한 환자수가 특별히 높은 위험지역은 불투수 환경에 노출된 행정동에서만 관찰되었다. 투수환경에 위치한 지역의 연도별 천식환자수의 변동폭에 대한 상관계수가 0.371이지만, 불투수면에 위치한 지역은 0.937로 나타나 불투수면에 위치한 지역은 지속적으로 많은 환자가 발생하는 것으로 확인된다. 즉 불투수면에 노출된 환경에 위치한 지역은 투수환경에 입지한 지역보다 장기간에 걸쳐 만성 천식질환을 앓고 있을 가능성이 많은 것으로 확인된다. 본 연구의 가장 큰 성과는 불투수면이 소아천식의 발생이나 만성소아천식의 유병률의 분석단위지역으로 결정적으로 중요한 변수라는 것을 확인하였다는 점이다.

  • PDF

나사유지형 임플란트 고정성 보철물의 적합도와 캔틸레버가 지지골조직의 응력분산에 미치는 영향 (The Effects of Screw Retained Prosthesis Misfit & Cantilever on Stress Distribution in Bone Around the Implant)

  • 이재인;김태영;조혜원
    • 구강회복응용과학지
    • /
    • 제29권3호
    • /
    • pp.224-235
    • /
    • 2013
  • 임플란트의 장기적인 성공을 위해 고정체의 형태, 외과적 술식, 골조직의 조건, 보철물 적합성, 주기적인 검사, 환자의 구강 위생 등에 많은 주의가 필요하다. 많은 연구에서 임플란트 지지 보철물의 적합도에 따른 임플란트의 예후에 관해 보고되었다. 보철물이 수동 적합되어야 임플란트의 상부구조및 하부구조에 해로운 응력을 야기하지 않는다고 보고되고 있으나 현재의 임플란트 보철물의 제작과정으로 진정한 수동 적합을 얻는 수 없다고 인정된다. 임상과정과 기공과정을 포함하여 임플란트 치료의 전 과정에서 오차가 발생하며, 이는 보철물을 변형을 야기하고 이는 임플란트 상부 보철물과 지대주 사이의 오차를 발생시킨다. 이러한 오차는 보철물 장착 후 보철물의 파절, 나사의 헐거움(screw loosening), 골소실, 골유착 실패와 같은 문제를 야기한다. 이런 오차에 의한 문제점은 cantilever의 존재, 과도한 교합력이 존재할 경우 더욱 증가된다고 보고되고 있다. 본 연구에서는 ITI 임플란트를 하악골의 견치후방의 무치악부에 3개를 식립하고 4-unit 캔틸레버 고정성 국소의치를 다양한 위치의 $100{\mu}m$ gap을 생성한 후 제작하고 gap을 생성하지 않은 고정성 국소의치와 30 lb의 하중하에서 광탄성 응력분석을 시행하여 응력분포 양상과상대적인 응력의 크기를 비교분석하였다.

쌍끌이 중층트롤어법의 연구 ( 1 ) - 모형어구의 망구형상에 관하여 - ( A Study on the Pair Midwater Trawling ( 1 ) - Mouth Performance of the Model Net - )

  • 이병기
    • 수산해양기술연구
    • /
    • 제31권1호
    • /
    • pp.29-44
    • /
    • 1995
  • A model experiment on the pair midwater trawl net applicable to 800 PS class Korean pair bottom trawlers was carried out in the special-prepared experimental thank. the tank was prepared as a reverse trapezoid shape in its vertical section by digging out flat soil. The dimension of the tank showed the 9.6 W$\times$43.0 L(m) of the upper fringe and the 4.8 W$\times$38.0 L(m) of the bottom with 3.0m in depth. The depth of water was maintained 2.7m during experiment. The model net was prepared based on the Tauti's similarity law of fishing gear in 1/30 scale considering the dimension of the experimental tank. Mouth performance of the model net during towing were determined by the photographs taken in front of the net mouth with the combinations of towing velocity, warp length and distance between paired boats. The results obtained can be summarized as follows: 1. Vertical opening of the model nets A and B was varied in the range of 0.18~0.88 m and 0.21~0.78 m (which can be converted into 5.4~26.4m and 6.3~23.4 m in the full-scale net) respectively, and was varied predominantly by towing speed. Vertical opening (H which is appendixed m for the model net. f for the full-scale net. A and B for the types of the model net) can be expressed as the function of towing velocity$V_t$as in the model net $V_t$ : m/ sec)$H_{mA}$=1.67$e^{-1.65V_t}$ $H_{mB}$=1.15$e^{-1.13V_t}$, in the full-scale net ($V_t$ : k't) $H_{fA}$=50.27$e^-0.37V_t$ $H_{fB}$=34.46$e^{-0.26Vt}$. 2. Horizontal opening of the model nets An and b was varied in the range of 1.03~1.54m and 1.04~1.55 m (which can be converted into 30.9~46.2 m and 31.2~46.5m in the full-scale net) respectively, and was varied predominantly by distance between paired boats. Horizontal opening (W, appendixes are as same as the former) an be expressed as the function of distance between paired boats $D_b$as in the model net $W_{mA}$=0.69+0.09$D_b$ $W{mB}$=0.73+0.09$D_b$, in the full-scale net $W_{fA}$=20.81+0.09$D_b$ $W_{fB}$=22.11+0.09$D_b$ 3. Net opening area of the model net A and B was varied in the range of 0.28~1.04 $m^2$ and 0.33~0.94$m^2$(which can be converted into 252~936$m^2$ and 297~846$m^2$ in the full-scale net) respectively, and was varied predominantly by towing velocity. Net opening area ($S$, appendixes are as same as the former) van be expressed as the function of towing velocity$V_t$ as in the model net $v_t$ : m/sec) $S_{Ma}$=2.01$e^{-1.54V_T}$ $S_{mA}$=1.40$e^{-1.65V_t}$, in the full-scale net ($V_t$ : k't) $S_{fA}$=1.807$e^-0.35V_t$ $S_{fA}$=1.265$e^{-0.24V_t}$. 4. Filtering volume of the model nets A and B was varied in the range of 0.32~0.55 $m^3$ and 0.37~0.55$m^3$(which can be converted into 8.640~14.850 $m^3$ and 9.990~14.850$m3$in the full~scale net) respectively, and was predominantly varied by towing speed. filtering volume of the model net-A showed the maximum at the towing speed 0.69 m/sec(3 k't in the full-scale net), compared with that of the model net B showed at 0.92 m/sec(4 k't in the full-scale net).

  • PDF

Mandibular Posterior Crossbite Appliance의 적용시 응력 분포에 관한 광탄성법적 연구 (Photoelastic evaluation of Mandibula Posterior Crossbite Appliance)

  • 정원중;장성호;윤영주;김광원
    • 대한치과교정학회지
    • /
    • 제31권6호
    • /
    • pp.559-566
    • /
    • 2001
  • 본 연구는 설측 이소맹출된 하악 제2대구치의 협측 반대교합을 개선하기 위해 사용되는 mandibular posterior crossbite appliance에 의해 하악 제2대구치의 치근단과 그 주위의 치조골에 발생되는 응력분포를 알아보기 위해 광탄성법을 이용하여 분석하였다. 하악의 치조골을 재현하기 위해 PL-3 형의 epoxy resin과 PL-3 보다 경질인 레진치아를 사용하여 설측 이소맹출된 하악 제2대구치를 광탄성모형으로 재현하였다. 광탄성 모현상에 mandibular posterior crossbite appliance를 적용하고 힘을 가하기 전과후의 응력 분포를 알아보기 위해 원형편광기 를 사용하여 모형의 전후방에서 관찰하였다. 이상의 연구를 통해 얻어진 결과는 다음과 같다. 1. 하악 제2대구치의 협측면에 힘을 가한 경우, 설측 치조정과 치근첨 부위에 응력이 집중되어 나타났고 회전중심이 치근 협측면의 중간 1/3부위와 치근첨 부위에 발생하였으며 이로 인해 제 2대구치에 협측으로의 비조절성 경사이동 및 회전력이 발생하였다. 2. 하악 제2대구치의 설측면에 힘을 가한 경우에는 협측면에 힘을 가한 경우 보다 치근첨에 더 많은 응력이 발생하였다. 또한 치근하방의 치조골 부위에 응력이 증가하였으며 치근의 협측면과 치근첨 부위의 회전중심도 없어져 이로 인한 협측으로의 조절성 경사 이동 및 함입력이 관찰되었다. 3. 하악 제2대구치의 협측이나 설측에 힘을 가한 경우, 고정원인 제1대구치의 치근첨 부위는 힘을 가하기 전의 초기 응력상태와 비교할 때 응력의 증가는 보이지 않아 구치부 협측 반대 교합의 개선시 하악의 설측 호선은 효과적인 고정원으로 사용될 수 있다. 이상의 연구 결과는 설측 이소맹출된 하악 제2대구치의 구치부 협측 반대교합을 개선하기 위해 사용되는 mandibular posterior crossbite appliance를 적용할 때, 제2대구치의 협측면보다는 설측면에서 힘을 부여하는 것이 교합장애를 야기시킬 수 있는 비조절성 경사이동과 구치의 회전을 피하면서 협측으로의 조절성 경사이동 및 함입력을 적용시킬 수 있음을 의미한다.

  • PDF

지자체가 선정한 현대팔경에 나타난 경관 선호 양상 (A Local Governments' Preferences in Selecting Modern Eight Scenic Landscapes)

  • 소현수
    • 한국전통조경학회지
    • /
    • 제38권1호
    • /
    • pp.92-102
    • /
    • 2020
  • 우리나라 78개 지자체가 홈페이지에 제시한 현대팔경 78개와 팔경을 구성하는 816개 경(景)을 통해 본 경관 선호 양상은 다음과 같다. 첫째, 경으로 선정된 자연환경 요소는 지형경관인 산, 대(臺), 암, 바위와 같은 산경요소와 하천, 해양, 호소(湖沼)경관으로 구분되는 수경요소가 대부분을 차지한다. 여기에 소나무, 은행나무, 산수유, 이팝나무 등 노거수, 가로수 길과 숲, 그리고 계절 경관을 제공하는 철쭉, 진달래, 연꽃, 갈대, 억새와 같은 식물요소가 포함된다. 둘째, 인문환경 요소로 선정된 경의 과반수가 묘역, 산성과 읍성, 전통마을, 별서누정, 사찰 등 역사문화유산이다. 다음으로 재래시장, 전시관, 테마파크, 해수욕장, 음식 거리 등 여가관광시설과 산책로, 광장, 공원, 식물원 등 녹색기반시설, 마지막으로 목장, 폐탄광, 철도역, 항구, 다리 등의 산업유산이 경으로 선정되었다. 셋째, 현대팔경에는 지역 대표시설, 특산물, 축제처럼 조망과 관련 없는 대상이 포함되었다. 넷째, 현대팔경의 과반수가 8개 경으로 구성되었지만, 홍보대상을 늘리기 위하여 20개, 38개, 100개로 구성된 것도 있다. 다섯째, 전래팔경과 현대팔경을 함께 소개하고, 주제를 달리한 두 개의 현대팔경을 만든 경우, 일부 지역으로 한정하여 현대팔경을 선정하는 등 여러 개의 현대팔경을 제시한 지자체가 있다. 또한 한 개의 경에 다수의 장소명을 넣은 경우도 많다. 여섯째, 경의 명칭에 '낙안(落雁)'을 사용한 소상전형과 '효종(曉鐘)', '낙조', '일몰', '야경', '여명', '일출'을 명칭에 넣고 경관과 구름, 노을, 달, 눈을 표현한 소상유사형 현대팔경, 관광 행태를 드러내는 명소체험형 현대팔경으로 구성된다. 대부분은 장소의 명칭만으로 인지도를 높인 명승형 현대팔경이다. 일곱째, 현대팔경의 명명 방식은 경물과 경색을 명시한 한자를 조합한 소상팔경식 명명 대신 글자 숫자만 네 개로 맞춘 경우, 장소를 특화하는 수식어를 넣은 경우 등으로 다양했다.

북한수산업(北韓水產業)의 현황(現況)과 전망(展望) (Present Status and Future Prospect on Fishing Industry in North Korea)

  • 이병기;김진건;최종하
    • 수산해양교육연구
    • /
    • 제3권2호
    • /
    • pp.73-82
    • /
    • 1991
  • In recent years, the communication and the trade between the Republic of Korea(South Korea) and the Communist bloc has been activated. The simultaneous entrance of South Korea and North Korea to the United Nations will accelerate the political dialogue and also the trade which is indirectly carried out through a third country at present will be turned into direct way. Fisheries products are also treated as one of the important trade goods and there is a hopeful prospect that the amount of trade will be steeply increased in the near future. Furthermore, there is a great possibility of development up to the joint utilization of fishing grounds or the joint investment in fisheries projects. Concerning such points, since it is very much important to understand the present status of fisheries in North Korea, the author made a study on this field as requested by the Board of Unification, and report a part of the study here. The prominent character of North Korea's ruling sea area is that the sea is completely separated into two regions-the East Sea Region and the West Sea Region-and no continuity exists between them. The East Sea Region locates in the fringe of the biggest fishing ground of the world-the North Pacific Ocean-and very rich in resources not only warm water fishes but also cold water fishes. Especially alaska pollack, Theragra chalcogramma, is caught abundantly in this region. Contrary to that, fishing activity in the West Sea Region seems to be interrupted in winter. Even though some valuable warm water fishes-yellow corvenia, Pseudosciaena manchurica, and hair tail, Trichiurus lepturus, and so forth-come to this region from spring to summer along the coast line of this region for spawning, and vigorous fishing activity is carried out. But the most of them migrate southward to the neighboring waters of Cheju Island for wintering from autumn to winter, and so the fishing activity in this region seems to be interrupted greatly during winter. The total number of fishing boats in North Korea is estimated at 36 thousand and the rate of mechnization at about 70% compared with 99 thousand and 78% in South Korea. North Korea proclaimed an exclusive economic zone of 200 nautical miles in 1977. Specific character of this zone is setting of military boundary zone, up to 50 miles from the base line in the East Sea Region and also it covers whole region of the economic zone in the West Sea Region. Especially in the East Sea Region she set up a straight base line which can not be permissible by the international law. North Korea's statistics on fisheries product has not been announced officially on account of her unique isolationism, but it can be estimated through several data procured. At the first, the amount of fisheries products in the North Korea is reported as about 1.7 million ${\frac{M}{T}}$ by Fisheries Statistics which issued by the FAO in 1987, but a North Korea's trade organization announced the amount as 3.5 million ${\frac{M}{T}}$ in 1988. The former seems to be underestimated and the latter must be an exaggeration. According to Chikuni, who is a Japanese worker for FAO, prepared the unofficial statistics based on the evidence which he collected through the fineries development plan of the FAO/UNDP, and estimated the mean amount between 1982 and 1984 was 2.4 million ${\frac{M}{T}}$ or so. The Board of Unification estimated on the basis of various factors that the amount was 2.2 million ${\frac{M}{T}}$ or so in 1987 and in 1988. This seems to be the most reasonable. To solve the chronic lack of foreign currency, North Korea makes effort on the development of fisheries, and has even aimed fisheries product at 11 million ${\frac{M}{T}}$ by 1993, but this target looks unrealistic under the present circumstances. Somehow, we can exploit her extreme policy which has gone so far as to establish such an excessive and impractical target. Nevertheless this will be helpful to promote the joint development of the fishery activity between South Korea and North Korea.

  • PDF