• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.1-5
• /
• 2010

We propose an algorithm which can classify the system should use a PI controller, which have a weak high frequency attenuation characteristics near the critical frequency. To classify the system, we use a time delay element to calculate a gain attenuation rate near the critical frequency. The proposed algorithm also can design PI controller with the given magnitude margin and phase margin specification. The proposed algorithm uses time delay element and saturation function to identify the one point information in frequency domain. We justify the proposed algorithm via the simulation.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.519-521
• /
• 2003

This paper presents a frequency analysis of subspan oscillation on overhead transmission line. The Oscillation frequency is a natural characteristic of a subspan and can be calculated. But it is not same to calculated frequency, because it has been composed several frequencies of adjacent subspan. We were analyzed to the frequency of subspan oscillation by FFT methods. This result will use to establish of the subspan location rules.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.201-205
• /
• 1987

In FH-SS systems when the bopping band is enough wide to onerlap with conventional band limited communication cethod (CBM). The portion of suchacts as an interfering signal. Thus it is gard to use them all together. This paper presents how the frequency gopping systems can simultaneously share the same band with CBM. The proposed mithod is that the frequency gopping band can arbitraily controlled by setting the specific input bith of digital frequency synthesizer to logical zero state We realized this by putting the hopping band Controller between pseudeo random generater and frequency synthesizer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1832-1838
• /
• 2009

In this paper, we present new signal de-interleaving method for the frequency agility radar in which the carrier frequency is changed irregularly. Generally radar use a fixed carrier frequency, and it is easy for electronic warfare system to de-interleave the radar signal with respect to the frequency, pulse width(PW), and direction of signal arriving(DOA). In frequency agility radar, it is difficult to de-interleave the radar signals according to the carrier frequency because the frequency is changed irregularly. We suggest a good de-interleaving method to identify the frequency agility radar signals in comparison with PRI's of radars. First we calculate pulse repeat Interval(PRI) of radar in linked-list and queue structure and de-interleave the radar signals with PRI, PW, and DOA, then identify the frequency agility radar. When we use the proposed algorism to the frequency agility radar, we have a good de-interleaving results with electronic warfare systems.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.36-43
• /
• 2001

In Korea, we are absolutely short of earthquake data in good quality from moderate and large earthquakes, which are needed fur the study of strong ground motion characteristics. This means that the best use of the available data is needed far the time being. In this respect, several methods are suggested in this paper, which can be applied in the process of data selection and analysis. First, it is shown that the calibration status of seismic stations can be easily checked by comparing the spectra from accelerometer and velocity sensor both of which are located at the same location. Secondly, it is recommended that S/N ratio in the frequency domain should be checked before discarding the data by only look of the data in time domain. Thirdly, the saturated earthquake data caused by ground motion level exceeding the detection limit of a seismograph are considered to see if such data can be used for spectrum analysis by performing numerical simulation. The result reveals that the saturated data can still be used within the dominant frequency range according to the levels of saturation. Finally, a technique to minimize the window effect that distorts the low frequency spectrum is suggested. This technique involves detrending in displacement domain once the displacement data are obtained by integration of low frequency components of the original data in time domain. Especially, the low frequency component can be separated by using discrete wavelet transform among many alternatives. All of these methods mentioned above may increase the available earthquake data and frequency range.

• Journal of Korean Medicine Rehabilitation
• /
• v.28 no.1
• /
• pp.33-51
• /
• 2018

Objectives The purpose of this study is to analyze the current status of measurement instruments used to evaluate pain and function for shoulder disease patients in Korean Medicine clinical studies published in South Korea. Methods 5 Korean online databases from January 2007 to July 2017 were used to source articles for the review. Data of pain and function assessment instruments, measurement methods, time point and frequency for shoulder assessment were extracted. And it was analyzed by investigating the frequency of use for each item. Results A total of 78 studies met the selection criteria. There were many studies with no description for pain assessment instruments or inconsistent measurement methods. In the function assessment, the frequency of use was low and there were a lot of use of instruments with low validity and reliability. Conclusions To develop the objectivity of clinical research, further clinical studies, active use of measurement instruments, and standardization of measurement methods are needed.

• Journal of Computing Science and Engineering
• /
• v.6 no.2
• /
• pp.79-88
• /
• 2012

Power continues to be a driving force in central processing units (CPU) design. Most of the advanced breakthroughs in power have been in a realm that is applicable to workstation CPUs. Advanced power management systems will manage temperature, dynamic voltage scaling and dynamic frequency scaling in a CPU. The use of power management systems for microcontrollers and embedded CPUs has been modest, and mostly focuses on very large scale integration (VLSI) level optimizations compared to system level optimizations. In this paper, a dynamic frequency controlling (DFC) technique is introduced, to lay the foundation of a system level power management system for commercial microcontrollers. The DFC technique allows a commercial microcontroller to have minor modifications on both the hardware and software side, to allow the clock frequency to change to save power; results in this study show a 10% savings. By adding an additional layer of software abstraction at the interrupt level, the microcontroller can operate without having knowledge of the current clock frequency, and this can be accomplished without having to use an embedded operating system.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.255-257
• /
• 1994

The V/F slip frequency constant control methods are used for driving induction motor with load commutated current source inverter, that is. constant V/F and slip frequency driving is used to load commutate the inverter below the critical frequency, while constant voltage and variable frequency and slip frequency driving are used in above the critical region. In order to applicate the load commutated current source inverter to the general use, speed control range of induction noter is selected to two times at rated frequency. Therefore, economical application is possible because of the maximum reduction of the condenser of the inverter output port. The use of the proposed force commutated circuit improves the false operation of force commutated circuit and inverter commutation failure which are produced by the influence of the lower-order harmonics of the conventional load commutated current source inverter at starting.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.33-38
• /
• 2015

The goal of this paper is to propose the Hangul Jamo to make a optimum transmission code of Hangul consonant and vowel(Jamo). The Hangul Jamo was analyzed by three kinds of Hangul Jamo. First one is the basic Hangul Jamo which is consisted by 24ea Jamo. Second one is a two combination keyboard which has 28ea Jamo. Third one is 54 Jamo set which is added the double Jamo to the second one. Use frequency of Hangul-Jamo is analyzed based on the Hangul in "Modern Korean Use Frequency Rate Survey Result" issued by The National Institute of the Korean Language". Total 58,437 Korean words are contained in the report and the words are composed with Hangul 1,540ea. The results of this study are as follows, In the Jamo are that in the first Jamo set case, the highest use frequency consonant is "ㅇ" and the lowest one is "ㅋ", and in the vowel case, the highest use frequency one is "ㅏ" and the lowest one is "ㅑ". In the second case, the highest use frequency consonant is same as first case and the highest vowel is "ㅏ" and the lowest one is "ㅒ". In the third case, the highest consonant is "ㅏ" and the lowest one is "ㅞ". the highest vowel is "ㄱ" and the lowest one is "ㄽ".

• Asia Pacific Journal of Corpus Research
• /
• v.1 no.2
• /
• pp.57-72
• /
• 2020

This study seeks to add to the current understanding of learners' use of modality in argumentative writing. A learner corpus of argumentative essays on four topics was created and compared to native English speaker data from the International Corpus Network of Asian Learners of English (ICNALE). The relationship between learners' use of modal devices (MDs) and the devices' appearance in the school's curriculum was also examined. The results showed that learners relied on a very narrow range of MDs compared to those in previous studies. The frequency of use of MDs varied based on the topic and did not seem to be driven by cultural factors as has been previously suggested. Learners used more hedges than boosters on all topics, contradicting most previous studies. Curriculum was determined to have a direct correlation with MD use, and other important factors may include perception of topic and overreliance on certain MDs over others (the One-to-One principal). This research implies that learners' perception of topic should be explored further as a variable affecting MD use. Curricula should be designed based on frequency of MD use by English native speakers, and learners should receive instruction that teaches the norms of MD use in academic writing. The methodology used in the study to determine correlations between MD use and the curriculum has a wide range of potential applications in the field of Contrastive Interlanguage Analysis.