• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.39-44
• /
• 2009

Polymer substrates were fabricated by using poly (phenylene ether) as a base resin, N,N'-m-phenylenedimaleimide (PDMI) as a crosslinking agent and decabromodiphenylethane as a flame retardant. The effects of crosslinking agent and flame retardant on physical properties such as dielectric property of the substrate were investigated. Thermal curing feature of PDMI with or without an initiator was analyzed by DSC, and then, PPE-PDMI test compositions were designed based on this result. Composite sheets were cast by film coater, laminated under vacuum and pressure, and then, the changes of dielectric constant, dielectric loss, peel strength, solder heat resistance and inflammability according to increasing amount of PDMI and flame retardant were evaluated, Dielectric constant and dielectric loss showed increasing trend with increasing amount of PDMI and flame retardant, but solder heat resistance and inflammability were improved. Peel strength was obtained higher than 1 kN/m when PDMI above 10 wt% was added, but slightly decreased as the amount of flame retardant increased. From the measured gel contents, the reaction mechanism of PPE-PDMI system was deduced to the formation of network structure by crosslinking PDMI with PPE rather than the formation of semi-IPN structure. In conclusion, the polymer composite substrate materials with dielectric constant of 2.52$\sim$2.65 and dielectric loss below 0.002 at 1 GHz were obtained and they will be proper for high frequency applications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2295-2302
• /
• 2014

The study aims primarily to evaluate the resistance of antibiotics and the prevalence of these enzymes among Escherichia coli the most frequent isolate of Enterobacteriaceae producing Extended-Spectrum ${\beta}$-Lactamase(ESBLs), to differentiate the types of enzymes in these isolates. Total 74(26.2%) Strains of producing ESBLs among the 282 E. coli isolates were isolated from hospitals of Chungcheong area (Daejeon, Chungnam, and Chungbuk) during a 6 month-period from February to July, 2013. 282 E. coli isolates including ESBL shown resistance rates of aztreonam 30.8%, Cefotaxim 30.9%, and Ceftazidime 32.2%, 74 isolates producing ESBLs in E. coli were resistant rates to Aztreonam 58.1%, Cefotaxim 100%, and Ceftazidime 63.5% of ${\beta}$-lactam antibiotics. CTX-M-2 (48 isolates) was the most prevalent type of ESBLs identified. Followed the order of frequency by PER-1 (28 isolates), VEB-1 (26 isolates) and CTX-M-8 (20 isolates), of the 74 isolates, 2 isolates only showed GES-1 in Chungnam province. Accurate identification type of ESBLs would aid in hospital infection control. This would give aid to the physician to prescribe more appropriate antibiotics.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.129-137
• /
• 2019

In this paper, we propose the purpose of this study is to examine whether the library's creation shared value activities in China and Korea affect brand quality, social status, and the influence of each variable according to the Chinese and Korean groups. To achieve the purpose of this study, the survey was conducted using questionnaires to users who have used the Big Data Sharing Service in Korean and Chinese libraries. A total of 500 questionnaires were distributed to participants in the study, and 460 of the recovered questionnaire were used in the final analysis, which eliminated unfaithful responses. The data collected through the survey were analyzed as frequency analysis, reliability analysis, confirmed factor analysis, and structured model using statistical programs SPSS22 and AMOS22. The results of the research identified through the empirical analysis of this study are as follows. First, the CSV activities of the library's big data have a significant influence on the brand quality and social status. Second, brand quality and social resistance has a significant positive effect on continuous use intention. Third, the influence of the CSV activities in Korean and Chinese libraries has been found to be partly different. Through the conclusion and discussion section, the theoretical implications of this study, practical implications and in-depth discussions on the limitations of the study and its future direction were presented.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.106-112
• /
• 2021

Catalyst poisoning by ionomers in membrane electrode assemblies of alkaline membrane fuel cells has been reported recently. We tried to improve the membrane electrode assembly's performance by controlling the solvent's ratio during electrode manufacturing. 4 Different mixing ratios of N-Methyl-2-pyrrolidone (NMP) and ethylene glycol (EG) gave four different cathode electrodes with platinum and Fuma-Tech ionomers. The electrode with higher EG improved polarization performance by about 36% compared to the NMP-based commercial ionomer. The dependence of the ionomer's dispersibility on the solvent seems responsible for the difference, which means that the non-uniform distribution of ionomers improves the performance of the electrode. High-frequency resistance, internal resistance corrected polarization curve, Tafel slope, mass activity, and impedance spectroscopy characterized the electrode. We can find that the existence of poor solvent improves cathode electrode performance. It seems to be the result of reduced poisoning of the catalyst according to the particle size distribution of the ionomer.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.1
• /
• pp.29-34
• /
• 2005

The wound induction motor can provide high starting torque and reduced starting current simultaneously by inserting large resistor externally when starting. And this technique is one of the well known methods among the induction motor starting methods and generally used for heavy load starting such as crane and cement factories. The conventional PI controller has been widely used in industrial application due to the simple control algorithm and is generally used for control of current torque, position, and speed for the wound induction motor drive system. However, the conventional control system for wound induction motor may result in poor performance because sensors have to be used but are often limited by the environmental condition. Recently, to overcome these problems, many sensorless vector control methods for the wound induction motor have been studied. This paper presents a MRAS method for sensorless vector control of the wound induction motor drive. In the conventional MRAS method, in low frequency, the stator resistance variation may result in poor performance. Therefore, this paper presents a MRAS method with stator and rotor resistance tuning for sensorless vector control of the wound induction motor to overcome several shortages of the conventional MRAS caused by parameter variation and to enhance the robustness of the sensorless vector control. The validity and effectiveness of the proposed method is verified through digital simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.399-405
• /
• 2011

In this paper, we present the design of Q-band LC VCO and injection locking buffer for 77 GHz automotive radar sensor using 130 nm RF CMOS process. To improve the phase noise characteristic of LC tank, the transmission line is used. The negative resistance by the active device cross-coupled pair of buffer is used for high output power, with or without oscillation of buffer. The measured phase noise is -102 dBc/Hz at 1 MHz offset frequency and tuning range is 34.53~35.07 GHz. The output power is higher than 4.1 dBm over entire tuning range. The fabricated chip size is $510{\times}130\;um^2$. The power consumption of LC VCO is 10.8 mW and injection locking buffer is 50.4 mW from 1.2 V supply.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.1
• /
• pp.7-15
• /
• 2012

Agronomic characteristics of 150 adzuki bean ($Vigna$ $angularis$ W.F. Wight) germplasm collected in Korea were investigated in order to establish basic data for the improvement of crop breeding. Growth types were classified as 3 types of indeterminate type, determinate type, and semideterminate type, of which indeterminate type was the highest percentage of 96.6%. Seed color were classified as 8 colors of which dark brown took 66.5% in 150 adzuki bean germplasm. Days from seeding to maturity showed the range from 89 to 142 days with 115 days in the average and the highest frequency proportion was 37.2% of the group from 131 to 140 days, and the next was 27.3% of the group from 121 to 130 days among 150 germplasm. Pod length showed the range from 5.9 to 10.1 cm with 7.8 cm in the average and the highest frequency distribution of it was the group from 7.1 to 8.0 cm with the proportion of 45.1% and the next was the group from 8.1 to 9.0 cm with the proportion of 32.2%. Number of pods per plant showed the range from 5.0 to 132.5 pods with 28.5 pods in the average and the highest frequency distribution of it was the group from 11.0 to 20.0 pods with the proportion of 30.8% and the next was the group from 21.0 to 30.0 pods with the proportion of 28.6%. Number of seeds per pod showed the range from 5.3 to 11.3 seeds with 8.2 seeds in the average and the highest frequency proportion of it was the group from 7.1 to 8.0 seeds, which occupied 32.2% among 150 germplasm. 89.3% of 150 germplasm showed the resistance to shattering of grains at harvest period. 100 grain weight showed the range from 5.7 to 23.0 g with 12.9 g in the average and the highest frequency proportion of it was the group from 9.01 to 13.0 g, which occupied 43.3% and the next was the group from 13.01 to 17.00 g with the proportion of 28.5% of 150 germplasm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.79-87
• /
• 2015

This paper proposes a floating-type wave energy conversion system that consists of a mechanical part (yo-yo vibrating system, motion rectifying system, and power transmission system) and electrical part (power generation system). The yo-yo vibrating system, which converts translational input to rotational motion, is modeled as a single degree-of-freedom system. It can amplify the wave input via the resonance phenomenon and enhance the energy conversion efficiency. The electromechanical model is established from impedance matching of the mechanical part to the electrical system. The performance was analyzed at various wave frequencies and damping ratios for a wave input acceleration of 0.14 g. The maximum output occurred at the resonance frequency and optimal load resistance, where the power conversion efficiency and electrical output power reached 48% and 290 W, respectively. Utilizing the resonance phenomenon was found to greatly enhance the performance of the wave energy converter, and there exists a maximum power point at the optimum load resistance.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.6
• /
• pp.453-459
• /
• 2000

Three rice (Oryza sativa L. var Dong-Jin) mutants (DTR1, DTR2, DTR3) resistant to S-methyltryptophan (5MT) were selected by mutagenized M3 seeds. The frequency of chlorophyll mutations induced by the EMS (0.2%) treatment performed 2 hours after flowering is clearly higher than that induced by other treatments in M1 generation. Progeny obtained from the self-pollinating of 5MT-resistant lines segregated with 3 : 1 of resistant to sensitive ratio. Furthermore, the ratio of homozygote to heterozygote in 5MT-resistant plants of the M4 generation was 1：2. These results show that 5MT resistance was inherited as a single dominant nuclear gene. The resistance was also expressed in callus derived from seeds. Total free amino acid content in homozygous seeds of DTR1 and DTR2 showed about 1.7 fold-increased compared to the wild-type seeds. In particular, the levels of phenylalanine and Iysine were, respectively, 6.2 and 3.2 times higher than those in the wild-type seeds. However, seeds of DTR3 had lower levels of free amino acid than the wild-type seeds. This result indicate that these mutants as a significant step towards the production of new rice with balanced amino acid content.

• Research in Plant Disease
• /
• v.19 no.1
• /
• pp.7-11
• /
• 2013

Forty eight isolates of Botrytis elliptica and 23 isolates of B. cinerea from several locations in Korea were tested for resistance to fungicides used in the farmer's fields. Isolation frequency of B. elliptica having $EC_{50}$ (effective concentration of 50%) value $500-1000{\mu}g/ml$ to benomyl and mancozeb appeared highly, suggesting that the two fungicides are not effective in controlling leaf blight of lily in the field. The isolates were tested for resistance to fungicides procymidone and iprodione which were most commonly used in the farmer's fields. The rates of $EC_{50}$ value $5-50{\mu}g/ml$ to procymidome and iprodione were 93.7% and 100%, respectively, and those of $0-0.1{\mu}g/ml$ to diethofencarb+carbendazim and fludioxonil were 98.0% and 93.8%, respectively. In the rain-protected cultivation, control of leaf blight of lily was the most effective when iprodine, diethofencarb+carbendazim, and fludioxonil were sprayed alternately four times during the growing season.